Research Output 2009 2020

2016
1 Citation (Scopus)

Investigation of tensile strength for areca frond/corn starch composites

Heckadka, S. S., Nayak, S. Y., Vikas, S. R., Kini, M. V. & Padmaraj, N. H., 01-09-2016, In : Indian Journal of Science and Technology. 9, 35, 95008.

Research output: Contribution to journalArticle

Starch
Tensile strength
Composite materials
Glycerol
Cellulose
18 Citations (Scopus)

Multi-surface topography targeted plateau honing for the processing of cylinder liner surfaces of automotive engines

Lawrence, K. D. & Ramamoorthy, B., 01-03-2016, In : Applied Surface Science. 365, p. 19-30 12 p.

Research output: Contribution to journalArticle

Honing
Surface topography
Engine cylinders
Engines
Processing
5 Citations (Scopus)
Open Access
Die casting inserts
Tapes
Turbomachine blades
Gas turbines
Cooling
5 Citations (Scopus)
Polyesters
Bast fibers
Polyester resins
Fibers
Composite materials
4 Citations (Scopus)

The hemodynamic effects of paravalvular leakage using fluid structure interaction; Transcatheter aortic valve implantation patient

Basri, A. A., Zuber, M., Zakaria, M. S., Basri, E. I., Aziz, A. F. A., Ali, R. M., Tamagawa, M. & Ahmad, K. A., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1513-1518 6 p.

Research output: Contribution to journalArticle

Aorta
Hemodynamics
Software
Reoperation
Cardiac Arrhythmias
7 Citations (Scopus)
Open Access
Turbomachine blades
Gas turbines
Cooling
Computational fluid dynamics
Temperature distribution
2017
1 Citation (Scopus)

A computational fluid dynamics study of combustion and emission performance in an annular combustor of a jet engine

Zuber, M., Hisham, M. S. B., Nasir, N. A. M., Basri, A. A. & Khader, S. M. A., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 1019-1028 10 p.

Research output: Contribution to journalArticle

Nitrogen Oxides
air transportation
Aviation
Jet engines
Hydrodynamics
1 Citation (Scopus)

Comparative approach to knee endoprosthesis stem materials-Static analysis of bone-implant system by the means of FEM

Pawlik, M., Ravishanker, B. B., Satish, S. B. & Raghuvir, P. B., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 261-267 7 p.

Research output: Contribution to journalArticle

Implant
Static analysis
Static Analysis
Bone
Finite element method

Design and development of an oil preheating system to study the performance of a diesel engine

Nayak, R., Indrajith & Kini, C. R., 01-11-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 21, p. 5955-5959 5 p.

Research output: Contribution to journalArticle

Preheating
Diesel engines
Engines
Lubrication
Journal bearings
2 Citations (Scopus)

Dynamic deformation–dependent magnetic field–induced force transmissibility characteristics of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-07-2017, In : Journal of Intelligent Material Systems and Structures. 28, 11, p. 1491-1500 10 p.

Research output: Contribution to journalArticle

Elastomers
Force measurement
Magnetic fields

Dynamic performance characteristics of finite journal bearings operating on TiO2 based nanolubricants

Binu, K. G., Yathish, K., Shenoy, B. S., Rao, D. S. & Pai, R., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 963-976 14 p.

Research output: Contribution to journalArticle

Journal bearings
nanoparticles
Nanoparticles
Lubricants
lubricants
Dental prostheses
Implant
Fatigue Life
Fatigue of materials
Grid
6 Citations (Scopus)
turbine blades
trailing edges
gas turbines
Turbomachine blades
Gas turbines

Effect of trailing edge roundness on FX 63-137 and Selig S1223 Airfoil

Anand, S., Pandey, A., Sharma, A. & Kini, C. R., 01-10-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 19, p. 5494-5499 6 p.

Research output: Contribution to journalArticle

Airfoils
Drag coefficient
Aerodynamics
Reynolds number
Students

Effect of Turbinectomy on Aerosol dynamics inside the Human Nasal Cavity

Zuber, M., Ahmadi, M. & Nazira, V., 2017, Lambert Academic Publisher. 53 p.

Research output: Book/ReportBook

3 Citations (Scopus)

Effect of V-shaped ribs on internal cooling of gas turbine blades

Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In : Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Cooling
Turbines
Rotors

Evaluation of Lingual Orthodontic appliances

Mascarenhas, R., Shenoy, S., Parveen, S., Chatra, L. & Husain, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 253-260 8 p.

Research output: Contribution to journalArticle

Brackets
Finite element method
Ligaments
Evaluation
Bone

Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading

Padmaraj, N. H., Chethan, K. N., Pavan & Onkar, A., 07-09-2017, In : IOP Conference Series: Materials Science and Engineering. 225, 1, 012017.

Research output: Contribution to journalArticle

Jute fibers
Fatigue of materials
Composite materials
Curve fitting
Alkalies
2 Citations (Scopus)
Fluid structure interaction
Turbomachine blades
Gas turbines
Cooling
Ducts

Influence of a Novel Hardener p-toluene Sulfonic Acid on Mechanical and Wear Response of Phenolic-Based Friction Materials

Pai, A., Kini, M. V. & Pokharel, V., 03-09-2017, In : Tribology Transactions. 60, 5, p. 770-780 11 p.

Research output: Contribution to journalArticle

hardeners
Friction materials
sulfonic acid
linings
Linings
2 Citations (Scopus)
Bast fibers
Thermosets
Aging of materials
Polyesters
Water
4 Citations (Scopus)

Mechanical response of fine laterite-modified polyester matrix composites

Pai, A., Padmaraj, N. H., Chethan, K. N. & Vibhor, S., 23-02-2017, In : Materials Research Innovations. 21, 2, p. 115-121 7 p.

Research output: Contribution to journalArticle

laterites
Polyesters
polyesters
composite materials
Composite materials
3 Citations (Scopus)

Numerical analysis of helical grooved channels near the leading edge region in gas turbine blade

Kini, C. R., Mendonca, R. M., Yalamarty, S. S., Kamat, H. & Satish Shenoy, B., 01-01-2017, In : International Review of Mechanical Engineering. 11, 3, p. 161-166 6 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Numerical analysis
Turbines
Cooling
1 Citation (Scopus)

Numerical study of a nasal cavity model having a constricted pharyngeal section representing obstructive sleep apnea

Zuber, M., Riazuddin, V. N., Ahmad, K. A. & Khader, S. M. A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 219-226 8 p.

Research output: Contribution to journalArticle

Sleep
Numerical Study
Cavity
Pressure Drop
Pressure drop
1 Citation (Scopus)
Launch vehicles
Particle swarm optimization (PSO)
Trajectories
Angle of attack
MATLAB
2 Citations (Scopus)
Aircraft control
Particle swarm optimization (PSO)
Derivatives
Control systems
Tuning

Preface

Pai, R., Shenoy, S. & Khader, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 217-218 2 p.

Research output: Contribution to journalEditorial

2 Citations (Scopus)
Axial-flow compressors
Transonic flow
Compressors
Turbomachine blades
Turbomachinery

Selected peer-reviewed articles from the first international conference on healthcare and technical research (ICHTR 2015), Manipal, India, 22–24 december, 2015

Udupa, N., Shenoy, B. S., Radhakrishnan, R., Janodia, M. D., Chaudhary, S., Devkar, R. A., Jain, P. & Menon, S., 01-03-2017, In : Advanced Science Letters. 23, 3, p. 1714-1717 4 p.

Research output: Contribution to journalComment/debate

Bearings (structural)
whirl
Reynolds number
perturbation
eccentricity
9 Citations (Scopus)
Bearings (structural)
static characteristics
grooves
journal bearings
Journal bearings
2018

Application of finite element analysis on balloon expandable coronary stents: A review

Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

Research output: Contribution to journalArticle

Open Access
Finite Element Analysis
Stents
Balloons
Finite element method
Arteries
1 Citation (Scopus)

A practical approach in porous medium combustion for domestic application: A review

Ismail, A. K., Ibrahim, N. H., Shamsuddin, K. A., Abdullah, M. Z. & Zubair, M., 01-06-2018, In : IOP Conference Series: Materials Science and Engineering. 370, 1, 012004.

Research output: Contribution to journalConference article

Porous materials
Compressed air
Fuel burners
Industrial applications
Coatings

Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-20 20 p.

Research output: Contribution to journalArticle

Axial-flow compressors
Transonic flow
Compressors
Rotors
Stream flow

Biomechanics of hip joint: A systematic review

Chethan, K. N., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1672-1676 5 p.

Research output: Contribution to journalArticle

Biomechanics
Hip Joint
Joint prostheses
Biomechanical Phenomena
Biocompatible Materials

Centroidal voronoi partitioning using virtual nodes for multirobot coverage

Nair, V. G. & Guruprasad, K. R., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 2, p. 135-139 5 p.

Research output: Contribution to journalArticle

Robots
Robotics
2 Citations (Scopus)

Characterization of natural cellulosic fiber from bark of Albizia amara

Senthamaraikannan, P., Sanjay, M. R., Bhat, K. S., Padmaraj, N. H. & Jawaid, M., 06-04-2018, (Accepted/In press) In : Journal of Natural Fibers. p. 1-8 8 p.

Research output: Contribution to journalArticle

Fibers
Natural fibers
Lignin
Tensile properties
Cellulose

Commercial viability of electric vehicles in India

Kumar, A., Choudhary, S. K. & Chethan, K. N., 01-06-2018, In : International Journal of Mechanical Engineering and Technology. 9, 6, p. 730-745 16 p.

Research output: Contribution to journalArticle

Electric vehicles
Greenhouse gases
Gas emissions
Commercial vehicles
Planets
2 Citations (Scopus)
Femur
Bone
Boundary conditions
Finite element method
Bone and Bones
1 Citation (Scopus)
Implant-Supported Dental Prosthesis
Finite Element Analysis
Dentures
Bone and Bones
Mandible
1 Citation (Scopus)

Effect of bamboo char and boron carbide particles on mechanical characteristics of Aluminum 6061 hybrid composites

Chethan, K. N., Pai, A., Padmaraj, N. H., Singhal, A. & Sinha, S., 13-07-2018, In : IOP Conference Series: Materials Science and Engineering. 377, 1, 012038.

Research output: Contribution to journalConference article

Boron carbide
Bamboo
Aluminum
Metals
Hardness
1 Citation (Scopus)
Bast fibers
Polyesters
Mechanical properties
Fibers
Composite materials
2 Citations (Scopus)

Experimental and numerical studies of porous media combustion in micro burner

Janvekar, A. A., Abdullah, M. Z., Ahmad, Z. A., Abas, A., Zuber, M., Ismail, A. K., Hussien, A., Kataraki, P., Mohamed, M., Bashir, M., Husin, A. & Fadzli, K., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 112-120 9 p.

Research output: Contribution to journalArticle

Fuel burners
Porous materials
Dental Porcelain
Porcelain
Aluminum Oxide
10 Citations (Scopus)

Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-03-2018, In : Journal of Materials Science. 53, 6, p. 4229-4241 13 p.

Research output: Contribution to journalArticle

Elastomers
Carbon Nanotubes
Carbon nanotubes
Fillers
Stiffness
2 Citations (Scopus)

Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

Bone
Polyethylene
Shielding
Polyethylenes
Metals
1 Citation (Scopus)

Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal

Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In : Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.

Research output: Contribution to journalConference article

Charcoal
Aluminum
Bamboo
Fabrication
Hardness
2 Citations (Scopus)

Fabrication and tribological response of aluminium 6061 hybrid composite reinforced with bamboo char and boron carbide micro-fillers

Chethan, K. N., Pai, A., Keni, L. G., Singhal, A. & Sinha, S., 03-03-2018, In : IOP Conference Series: Materials Science and Engineering. 310, 1, 012028.

Research output: Contribution to journalConference article

Boron carbide
Charcoal
Bamboo
Aluminum
Fillers
Axial-flow compressors
Air
Engines
Aircraft
Machinery
4 Citations (Scopus)

Haemodynamics behaviour in normal and stenosed renal artery using computational fluid dynamics

Khader, S. M. A., Azriff, A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 80-90 11 p.

Research output: Contribution to journalArticle

Hemodynamics
Computational fluid dynamics
Pulsatile flow
Tomography
Shear stress