Research Output 2009 2020

Bearings (structural)
Journal bearings
Lubricants
Water
Reynolds equation
1 Citation (Scopus)

Effect of helix angle and cross section of helicoidal ducts in gas turbine blade cooling

Kini, C. R., Purohit, S., Bhagat, K. K. & Shenoy B., S., 01-01-2019, In : International Review of Mechanical Engineering. 13, 2, p. 87-96 10 p.

Research output: Contribution to journalArticle

Ducts
Turbomachine blades
Gas turbines
Cooling
Thermal load
29 Citations (Scopus)

Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing

Shenoy, B. S., Binu, K. G., Pai, R., Rao, D. S. & Pai, R., 01-01-2012, In : Tribology International. 45, 1, p. 38-42 5 p.

Research output: Contribution to journalArticle

Bearings (structural)
fluid films
Application programming interfaces (API)
application programming interface
Diesel engines
25 Citations (Scopus)

Effect of piezoelectric fan mode shape on the heat transfer characteristics

Fairuz, Z. M., Sufian, S. F., Abdullah, M. Z., Zubair, M. & Abdul Aziz, M. S., 03-2014, In : International Communications in Heat and Mass Transfer. 52, p. 140-151 12 p.

Research output: Contribution to journalArticle

modal response
fans
Fans
heat transfer
Heat transfer

Effect of trailing edge roundness on FX 63-137 and Selig S1223 Airfoil

Anand, S., Pandey, A., Sharma, A. & Kini, C. R., 01-10-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 19, p. 5494-5499 6 p.

Research output: Contribution to journalArticle

Airfoils
Drag coefficient
Aerodynamics
Reynolds number
Students

Effect of Turbinectomy on Aerosol dynamics inside the Human Nasal Cavity

Zuber, M., Ahmadi, M. & Nazira, V., 2017, Lambert Academic Publisher. 53 p.

Research output: Book/ReportBook

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Bearing pads
Turbulence
Fluids
Reynolds equation
11 Citations (Scopus)
Bearings (structural)
fluid films
Turbulence
turbulence
lubricants
6 Citations (Scopus)

Effect of twisted tape inserts and stacks on internal cooling of gas turbine blades

Kini, C. R., Kamat, H. & Shenoy, B. S., 01-01-2016, In : Indian Journal of Science and Technology. 9, 31, 95978.

Research output: Contribution to journalArticle

Open Access
Die casting inserts
Tapes
Turbomachine blades
Gas turbines
Cooling
3 Citations (Scopus)

Effect of V-shaped ribs on internal cooling of gas turbine blades

Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In : Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Cooling
Turbines
Rotors
7 Citations (Scopus)

Effect of Wing Deformation on the Aerodynamic Performance of Flapping Wings: Fluid-Structure Interaction Approach

Fairuz, Z. M., Abdullah, M. Z., Zubair, M., Abdul Mujeebu, M., Abdullah, M. K., Yusoff, H. & Abdul Aziz, M. S., 01-07-2016, In : Journal of Aerospace Engineering. 29, 4, 4016006.

Research output: Contribution to journalArticle

Fluid structure interaction
Aerodynamics
Flexible wings
Reynolds number
Rigid wings
4 Citations (Scopus)
Bearings (structural)
Elastohydrodynamic Lubrication
Journal Bearing
Interaction Techniques
Fluid structure interaction

Emission control studies in homogeneous charge compression ignition, premixed charge compression ignition and common rail direct injection engines–a review

Rahul Chowta, P., Murthy, K. & Mahesha, G. T., 01-01-2019, (Accepted/In press) In : Biofuels.

Research output: Contribution to journalArticle

Emission control
Direct injection
emission control
Automobiles
Ignition
12 Citations (Scopus)

Evaluation of image based Abbott-Firestone curve parameters using machine vision for the characterization of cylinder liner surface topography

Deepak Lawrence, K., Shanmugamani, R. & Ramamoorthy, B., 2014, In : Measurement: Journal of the International Measurement Confederation. 55, p. 318-334 17 p.

Research output: Contribution to journalArticle

Surface Topography
Machine Vision
computer vision
Surface topography
linings

Evaluation of Lingual Orthodontic appliances

Mascarenhas, R., Shenoy, S., Parveen, S., Chatra, L. & Husain, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 253-260 8 p.

Research output: Contribution to journalArticle

Brackets
Finite element method
Ligaments
Evaluation
Bone
18 Citations (Scopus)

Experimental and numerical investigation of the effects of passive vortex generators on Aludra UAV performance

Zhen, T. K., Zubair, M. & Ahmad, K. A., 10-2011, In : Chinese Journal of Aeronautics. 24, 5, p. 577-583 7 p.

Research output: Contribution to journalArticle

Vehicle performance
Unmanned aerial vehicles (UAV)
Vortex flow
Gas generators
Wall function
2 Citations (Scopus)

Experimental and numerical studies of porous media combustion in micro burner

Janvekar, A. A., Abdullah, M. Z., Ahmad, Z. A., Abas, A., Zuber, M., Ismail, A. K., Hussien, A., Kataraki, P., Mohamed, M., Bashir, M., Husin, A. & Fadzli, K., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 112-120 9 p.

Research output: Contribution to journalArticle

Fuel burners
Porous materials
Dental Porcelain
Porcelain
Aluminum Oxide

Experimental and numerical study of stenotic flows

Khader, S. M. A., Rajeev, R., Ayachit, A., Pai, R., Muraleedharan, C. V., Zubair, M. & Rao, V. R. K., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1500-1506 7 p.

Research output: Contribution to journalArticle

Pathologic Constriction
Pulsatile Flow
Pulse
Aorta
Cause of Death
Laminates
Erosion
Glass
Aluminum Oxide
Analysis of variance (ANOVA)
10 Citations (Scopus)

Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-03-2018, In : Journal of Materials Science. 53, 6, p. 4229-4241 13 p.

Research output: Contribution to journalArticle

Elastomers
Carbon Nanotubes
Carbon nanotubes
Fillers
Stiffness
5 Citations (Scopus)

Experimental study of hydrodynamic pressure distribution in oil lubricated two-axial groove journal bearing

Binu, K. G., Yathish, K., Mallya, R., Shenoy, B. S., Rao, D. S. & Pai, R., 01-01-2015, In : Materials Today: Proceedings. 2, 4-5, p. 3453-3462 10 p.

Research output: Contribution to journalArticle

Journal bearings
Pressure distribution
Oils
Hydrodynamics
Pressure measurement
Open Access
Stiffness
Fatigue of materials
Degradation
Glass
Composite materials
4 Citations (Scopus)

Experiment and simulation to develop clean porous medium surface combustor using LPG

Abdul Mujeebu, M., Abdullah, M. Z. & Zuber, M., 2013, In : Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology. 33, 1, p. 55-61 7 p.

Research output: Contribution to journalArticle

Penicillin G Benzathine
Liquefied petroleum gas
burners
combustion chambers
Combustors
2 Citations (Scopus)

Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

Bone
Polyethylene
Shielding
Polyethylenes
Metals
1 Citation (Scopus)

Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal

Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In : Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.

Research output: Contribution to journalConference article

Charcoal
Aluminum
Bamboo
Fabrication
Hardness
2 Citations (Scopus)

Fabrication and tribological response of aluminium 6061 hybrid composite reinforced with bamboo char and boron carbide micro-fillers

Chethan, K. N., Pai, A., Keni, L. G., Singhal, A. & Sinha, S., 03-03-2018, In : IOP Conference Series: Materials Science and Engineering. 310, 1, 012028.

Research output: Contribution to journalConference article

Boron carbide
Charcoal
Bamboo
Aluminum
Fillers

Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading

Padmaraj, N. H., Chethan, K. N., Pavan & Onkar, A., 07-09-2017, In : IOP Conference Series: Materials Science and Engineering. 225, 1, 012017.

Research output: Contribution to journalArticle

Jute fibers
Fatigue of materials
Composite materials
Curve fitting
Alkalies
Open Access
Finite Element Analysis
Hip Joint
Femur
Hip
Joints
1 Citation (Scopus)

FINITE ELEMENT ANALYSIS of URINARY BLADDER WALL THICKNESS at DIFFERENT PRESSURE CONDITION

Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M. & Shenoy, B. S., 01-08-2019, In : Journal of Mechanics in Medicine and Biology. 19, 5, 1950029.

Research output: Contribution to journalArticle

Pressure gradient
Loads (forces)
Mechanical properties
Mucous Membrane

Flow analysis inside coated porous media

Ismail, A. K., Abdullah, M. Z., Jamaludin, A. R., Zubair, M. & Ibrahim, N. H., 01-01-2019, Advanced Structured Materials. Springer Verlag, p. 153-160 8 p. (Advanced Structured Materials; vol. 102).

Research output: Chapter in Book/Report/Conference proceedingChapter

Porous materials
Porosity
Computational fluid dynamics
Coatings
Coating techniques
Axial-flow compressors
Air
Engines
Aircraft
Machinery
2 Citations (Scopus)
Fluid structure interaction
Turbomachine blades
Gas turbines
Cooling
Ducts
3 Citations (Scopus)

Fluid-structure interaction study of stenotic flow in subject specific carotid bifurcation-a case study

Pai, R., Khader, S. M. A., Ayachit, A., Ahmad, K. A., Zubair, M., Rao, V. R. K. & Kamath, S. G., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1494-1499 6 p.

Research output: Contribution to journalArticle

Hemodynamics
Internal Carotid Artery
Pulse
Disease Progression
Arteries

GM-VPC: An Algorithm for Multi-robot Coverage of Known Spaces Using Generalized Voronoi Partition

Nair, V. G. & Guruprasad, K. R., 01-01-2019, (Accepted/In press) In : Robotica.

Research output: Contribution to journalArticle

Multi-robot
Voronoi
Geodesic
Coverage
Partition
4 Citations (Scopus)

Haemodynamics behaviour in normal and stenosed renal artery using computational fluid dynamics

Khader, S. M. A., Azriff, A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 80-90 11 p.

Research output: Contribution to journalArticle

Hemodynamics
Computational fluid dynamics
Pulsatile flow
Tomography
Shear stress
1 Citation (Scopus)

Haemodynamics study in subject-specific abdominal aorta with renal bifurcation using CFD - A case study

Khader, S. M. A., Azriff, A., Pai, R., Zubair, M., Ahmad, K. A., Ahmad, Z. & Prakashini, K., 01-10-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 50, 2, p. 118-121 4 p.

Research output: Contribution to journalArticle

Hemodynamics
Computational fluid dynamics
Computerized tomography
Flow patterns
Shear stress

Haemodynamic study of idealistic renal artery under different flow conditions

Johny, C., Abdul Khader, S. M., Raghuvir Pai, B., Zuber, M., Ahmed, K. A. & Ahmad, Z., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 541-552 12 p.

Research output: Contribution to journalArticle

Hemodynamics
Arteries
Aorta
Wall Shear Stress
Transient Analysis
1 Citation (Scopus)
Ducts
Turbomachine blades
Computational fluid dynamics
Turbines
Heat transfer
10 Citations (Scopus)

Hybrid mesh for nasal airflow studies

Zubair, M., Abdullah, M. Z. & Ahmad, K. A., 2013, In : Computational and Mathematical Methods in Medicine. 2013, 727362.

Research output: Contribution to journalArticle

Nose
Flow rate
Mesh
Unstructured Mesh
Navier Stokes equations

Influence of a Novel Hardener p-toluene Sulfonic Acid on Mechanical and Wear Response of Phenolic-Based Friction Materials

Pai, A., Kini, M. V. & Pokharel, V., 03-09-2017, In : Tribology Transactions. 60, 5, p. 770-780 11 p.

Research output: Contribution to journalArticle

hardeners
Friction materials
sulfonic acid
linings
Linings

Influence of filler material on mechanical and vibration properties of basalt/epoxy composites

Surana, I., Pandya, D. J., Padmaraj, N. H., Hegde, S. & Chethan, K. N., 19-06-2019, In : Materials Research Express. 6, 8, 085342.

Research output: Contribution to journalArticle

Sawdust
Basalt
Laminates
Fillers
Composite materials
1 Citation (Scopus)

Influence of marine environment on mechanical properties of glass fiber reinforced composites

Padmaraj, N. H., Chethan, K. N., Utkarsh, S., Banerjee, S. & Utkarsh, 13-07-2018, In : IOP Conference Series: Materials Science and Engineering. 377, 1, 012132.

Research output: Contribution to journalConference article

Glass fibers
Mechanical properties
Polyesters
Water
Composite materials
3 Citations (Scopus)
Open Access
Seawater
Moisture
Glass
Composite materials
Laminates

Innovations and recent trends in Shape Memory Alloy: A review

Kawate, S. S., Chethan, K. N., Keni, L. G., Pai, A. & Padmaraj, N. H., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 4, p. 2172-2177 6 p.

Research output: Contribution to journalReview article

Shape memory effect
Innovation
Nickel alloys
Titanium alloys
Thermoelasticity
1 Citation (Scopus)

Investigation of tensile strength for areca frond/corn starch composites

Heckadka, S. S., Nayak, S. Y., Vikas, S. R., Kini, M. V. & Padmaraj, N. H., 01-09-2016, In : Indian Journal of Science and Technology. 9, 35, 95008.

Research output: Contribution to journalArticle

Starch
Tensile strength
Composite materials
Glycerol
Cellulose
3 Citations (Scopus)

Journal of advanced research in fluid mechanics and thermal sciences

Sreenath, J. & Pai, A., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 58-66 9 p.

Research output: Contribution to journalArticle

Biofuels
Fluid mechanics
Biodiesel
Fossil fuels
Oils

Manhattan distance based Voronoi partitioning for efficient multi-robot coverage

Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 81-90 10 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
2 Citations (Scopus)
Bast fibers
Thermosets
Aging of materials
Polyesters
Water

Mechanical characterization of aluminum 6061 with B4C and high entropy alloys

Rishi, M., Chv, S. R., Keni, L. G., Padmaraj, N. H. & Chethan, K. N., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 527-538 12 p., IJMPERDOCT201946.

Research output: Contribution to journalArticle

Aluminum
Entropy
Hardness
Automotive industry
Reinforcement

Mechanical Characterization of Areca husk-Coir fiber reinforced hybrid Composites

Padmaraj, N. H., Keni, L. G., Chetan, K. N. & Shetty, M., 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 1292-1297 6 p.

Research output: Contribution to journalArticle

Areca
Fibers
Composite materials
Sodium Hydroxide
Polyester resins