Research Output

Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Vehicular communication systems

Drishan, B. S., Nair, V. G. & Mahesha, G. T., 01-01-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 3, p. 21-32 12 p., IJMPERDJUN20203.

Research output: Contribution to journalArticle

Open Access

Three dimensional finite element stress analysis of two and four implant supported prosthesis

Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In : Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In : Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

Research output: Contribution to journalArticle

Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

Research output: Contribution to journalArticle

The Tesla Turbine - A comprehensive review

Zuber, M., Ramesh, A. & Bansal, D., 01-10-2019, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 62, 1, p. 122-137 16 p.

Research output: Contribution to journalArticle

Open Access
7 Citations (Scopus)

Thermal management systems for EV's and HEV's

Bajaj, H. & Kini, C. R., 01-01-2019, In : ARPN Journal of Engineering and Applied Sciences. 14, 1, p. 265-269 5 p.

Research output: Contribution to journalArticle

Thermal analysis of dual piezoelectric fans for cooling multi-LED packages

Sufian, S. F., Fairuz, Z. M., Zubair, M., Abdullah, M. Z. & Mohamed, J. J., 2014, In : Microelectronics Reliability. 54, 8, p. 1534-1543 10 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)

The hemodynamic effects of paravalvular leakage using fluid structure interaction; Transcatheter aortic valve implantation patient

Basri, A. A., Zuber, M., Zakaria, M. S., Basri, E. I., Aziz, A. F. A., Ali, R. M., Tamagawa, M. & Ahmad, K. A., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1513-1518 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Taguchi analysis of combustion of diesel and bio-diesel blend utilizing homogeneous reactor model

Pai, A., Singh, V. K., Suthar, S. & Sharma, H., 01-12-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 52, 1, p. 94-103 10 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Surface topography characterization of automotive cylinder liner surfaces using fractal methods

Lawrence K, D. & Ramamoorthy, B., 01-09-2013, In : Applied Surface Science. 280, p. 332-342 11 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Study of velocity profiles of orbal biological system (OBS) using computational fluid dynamics (CFD)

Saad, N. A., Zakaria, N. A., Aziz, H. A., Abdullah, M. Z. & Zuber, M., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 447-454 8 p.

Research output: Contribution to journalArticle

Study of the influence of normal and high blood pressure on normal and stenosed carotid bifurcation using fluid-structure interaction

Abdul Khader, S. M. A., Ayachit, A., Pai, R., Zubair & Ahmed, K. A., 2013, Mechanical and Manufacturing Engineering. Vol. 315. p. 982-986 5 p. (Applied Mechanics and Materials; vol. 315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
24 Citations (Scopus)

Statistical and surface metallurgical study during electric discharge machining of Ti-6Al-4V

Shetty, R., Pai, R., Barboza, A. B. V. & Shetty, Y., 01-06-2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 11, p. 3594-3600 7 p.

Research output: Contribution to journalArticle

Static thrust measurement of two types of perforated solid propellant grain configurations

Long, A. K., Zubair, M. & Ahmad, K. A., 2012, In : Journal of Aerospace Engineering. 25, 4, p. 653-659 7 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
Open Access
5 Citations (Scopus)
12 Citations (Scopus)
17 Citations (Scopus)

Stability of water lubricated bearing using linear perturbation method under turbulent conditions

Mallya, R., Shenoy, B. S., Pai, R. S. & Pai, R. S., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 995-1008 14 p.

Research output: Contribution to journalArticle

Simultaneous exploration and coverage by a mobile robot

Mohammad Minhaz Falaki, P. M., Padman, A., Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 33-41 9 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation and Comparative performance analysis of Modified Cyclone Dust Separator

Bhade, S. & Hegde, S., 09-12-2019, In : IOP Conference Series: Materials Science and Engineering. 577, 1, 012026.

Research output: Contribution to journalConference article

Open Access

Selected peer-reviewed articles from the first international conference on healthcare and technical research (ICHTR 2015), Manipal, India, 22–24 december, 2015

Udupa, N., Shenoy, B. S., Radhakrishnan, R., Janodia, M. D., Chaudhary, S., Devkar, R. A., Jain, P. & Menon, S., 01-03-2017, In : Advanced Science Letters. 23, 3, p. 1714-1717 4 p.

Research output: Contribution to journalComment/debate

Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In : Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

Research output: Contribution to journalConference article

8 Citations (Scopus)

Review on impact response of polymer composites

Zubair, M. & Pai, Y., 01-01-2019, In : Journal of Mechanical Engineering Research and Developments. 42, 4, p. 238-242 5 p.

Research output: Contribution to journalReview article

Open Access

Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In : Materials Today: Proceedings. 19, p. 658-662 5 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Review on alternative propulsion in automotives-hybrid vehicles

Basavaradder, A. B., Dayananda Pai, K. & Chethan, K. N., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1311-1319 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Review of natural fiber composites

Rohan, T., Tushar, B. & Mahesha, G. T., 01-03-2018, In : IOP Conference Series: Materials Science and Engineering. 314, 1, 012020.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Review: A critical overview of limitations of cfd modeling in nasal airflow

Zubair, M., Abdullah, M. Z., Ismail, R., Shuaib, I. L., Hamid, S. A. & Ahmad, K. A., 2012, In : Journal of Medical and Biological Engineering. 32, 2, p. 77-84 8 p.

Research output: Contribution to journalReview article

33 Citations (Scopus)

Reconfigurable body exterior panels: A review

Bangde, S., Kini, C. R. & Paic, A., 01-01-2020, In : Journal of Mechanical Engineering Research and Developments. 43, 4, p. 14-23 10 p.

Research output: Contribution to journalArticle

Recent trends in aerodynamic performance developments of automobile vehicles: A review

Rohit, R., Kini, C. R. & Srinivas, G., 01-01-2019, In : Journal of Mechanical Engineering Research and Developments. 42, 4, p. 206-214 9 p.

Research output: Contribution to journalReview article

Open Access
2 Citations (Scopus)
1 Citation (Scopus)

Recent Advances in Substrate Materials and Thermal Analysis of Catalytic Converters

Pai, D. & Prabhu, M. K., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24221-24230 10 p.

Research output: Contribution to journalConference article

Productivity enhancement in the assembly line of a horn manufacturing company

Sabatini, H., Sharanya, V., Sakthivel Anand, G. & Deepak Lawrence, K., 06-2010, In : International Journal of Management Practice. 4, 2, p. 200-215 16 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
8 Citations (Scopus)

Preparation of chemically treated sugarcane bagasse fiber reinforced epoxy composites and their characterization

Vidyashri, V., Lewis, H., Narayanasamy, P., Mahesha, G. T. & Bhat, K. S., 01-01-2019, In : Cogent Engineering. 6, 1, 1708644.

Research output: Contribution to journalArticle

Open Access

Preface

Pai, R., Shenoy, S. & Khader, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 217-218 2 p.

Research output: Contribution to journalEditorial

Plastic oil as an alternative fuel in diesel engine

Sabarinathan, V., Kini, C. R. & Srinivas, G., 01-01-2019, In : Journal of Mechanical Engineering Research and Developments. 42, 4, p. 215-220 6 p.

Research output: Contribution to journalArticle

Open Access

Performance studies on non-edible oil as IC engine fuels: A review

Krishna, K., Murthy, K. & Mahesha, G. T., 01-01-2019, In : Nature Environment and Pollution Technology. 18, 4, p. 1185-1192 8 p.

Research output: Contribution to journalReview article

Performance of a monarch butterfly for various flapping angle

Aaroh, Zuber, M., Khader, S. M. A., Kalburgi, S., Basri, E. I. & Ahmad, K. A., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 4, p. 126-130 5 p.

Research output: Contribution to journalArticle

Performance evaluation of homogeneous charge compression ignition combustion engine – a review

Kodancha, P., Pai, A., Kini, C. R. & Bayar, R. K., 2020, In : Journal of Engineering and Technological Sciences. 52, 3, p. 289-309 21 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Particle Swarm Optimization Applied to Ascent Phase Launch Vehicle Trajectory Optimization Problem

Dileep, M. V., Kamath, S. & Nair, V. G., 2015, In : Procedia Computer Science. 54, p. 516-522 7 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)