Research Output 2009 2020

Article
3 Citations (Scopus)

A 3 dimensional assessment of the depth of tumor invasion in microinvasive tongue squamous cell carcinoma - A case series analysis

Amit-Byatnal, A., Natarajan, J., Shenoy, S., Kamath, A., Hunter, K. & Rad-Hakrishnan, R., 01-11-2015, In : Medicina Oral, Patologia Oral y Cirugia Bucal. 20, 6, p. e645-e650

Research output: Contribution to journalArticle

Tongue
Squamous Cell Carcinoma
Neoplasms
Nonparametric Statistics
Recurrence
1 Citation (Scopus)
Overlay Denture
Finite Element Analysis
Mandible
Neck
Software
1 Citation (Scopus)

A comparative study of transient flow through cerebral aneurysms using CFD

Abdul Khader, S. M., Zubair, M., Raghuvir Pai, B., Rao, V. R. K. & Ganesh Kamath, S., 12-2009, In : World Academy of Science, Engineering and Technology. 36, p. 606-610 5 p.

Research output: Contribution to journalArticle

Hemodynamics
Computational fluid dynamics
Transient analysis

A computational fluid dynamics study of combustion and emission performance in an annular combustor of a jet engine

Zuber, M., Hisham, M. S. B., Nasir, N. A. M., Basri, A. A. & Khader, S. M. A., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 1019-1028 10 p.

Research output: Contribution to journalArticle

Nitrogen Oxides
air transportation
Aviation
Jet engines
Hydrodynamics
16 Citations (Scopus)

Airflow inside the nasal cavity: Visualization using computational fluid dynamics

Zubair, M., Riazuddin, V. N., Abdullah, M. Z., Ismail, R., Shuaib, I. L., Hamid, S. A. & Ahmad, K. A., 08-2010, In : Asian Biomedicine. 4, 4, p. 657-661 5 p.

Research output: Contribution to journalArticle

Nasal Cavity
Hydrodynamics
Computational fluid dynamics
Nose
Visualization
16 Citations (Scopus)

An accurate and robust method for the honing angle evaluation of cylinder liner surface using machine vision

Lawrence.k, D. & Ramamoorthy, B., 07-2011, In : International Journal of Advanced Manufacturing Technology. 55, 5-8, p. 611-621 11 p.

Research output: Contribution to journalArticle

Honing
Computer vision
Image processing
Hough transforms
CCD cameras
10 Citations (Scopus)
Elastomers
Rubber
Iron powder
Iron
Magnetic fields

Application of finite element analysis on balloon expandable coronary stents: A review

Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

Research output: Contribution to journalArticle

Open Access
Finite Element Analysis
Stents
Balloons
Finite element method
Arteries
33 Citations (Scopus)

Application of porous medium burner with micro cogeneration system

Ismail, A. K., Abdullah, M. Z., Zubair, M., Ahmad, Z. A., Jamaludin, A. R., Mustafa, K. F. & Abdullah, M. N., 01-02-2013, In : Energy. 50, 1, p. 131-142 12 p.

Research output: Contribution to journalArticle

Fuel burners
Porous materials
Mobile phones
Flow rate
Heating
8 Citations (Scopus)
Machining
Surface roughness
Coolants
Hardness
Flow rate
14 Citations (Scopus)
Launch vehicles
Particle swarm optimization (PSO)
Trajectories
Liquid propellants
Angle of attack

A study on the increasing risks(Trauma) related to an ambulance for a paramedic and patient-A review

Gupta, R., Satish Shenoy, B., Chethan, K. N. & Zuber, M., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 791-802 12 p., IJMPERDOCT201970.

Research output: Contribution to journalArticle

Ambulances
Emergency vehicles
Sensors
Ergonomics
Accelerometers

Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-20 20 p.

Research output: Contribution to journalArticle

Axial-flow compressors
Transonic flow
Compressors
Rotors
Stream flow

Biomechanics of hip joint: A systematic review

Chethan, K. N., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1672-1676 5 p.

Research output: Contribution to journalArticle

Biomechanics
Hip Joint
Joint prostheses
Biomechanical Phenomena
Biocompatible Materials

Centroidal voronoi partitioning using virtual nodes for multirobot coverage

Nair, V. G. & Guruprasad, K. R., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 2, p. 135-139 5 p.

Research output: Contribution to journalArticle

Robots
Robotics

CFD analysis of flow through Venturi tube and its discharge coefficient

Tukimin, A., Zuber, M. & Ahmad, K. A., 31-10-2016, In : IOP Conference Series: Materials Science and Engineering. 152, 1, 012062.

Research output: Contribution to journalArticle

Gas fuel measurement
Dynamic analysis
Computational fluid dynamics
Gas discharge tubes
Flow measurement

CFD analysis of mucous effect in the nasal cavity

Ahmadi, M., Kojourimanesh, M., Zuber, M., Riazuddin, V. N. & Khader, S. M. A., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 491-498 8 p.

Research output: Contribution to journalArticle

Computational fluid dynamics
Cavity
Particle Transport
Computerized tomography
Continuity Equation
4 Citations (Scopus)

Characteristic airflow patterns during inspiration and expiration: Experimental and numerical investigation

Zubair, M., Ahmad, K. A., Abdullah, M. Z. & Sufian, S. F., 2015, In : Journal of Medical and Biological Engineering. 35, 3, p. 387-394 8 p.

Research output: Contribution to journalArticle

Rheology
Nose
Velocity measurement
Flow patterns
Flow measurement
2 Citations (Scopus)

Characterization of natural cellulosic fiber from bark of Albizia amara

Senthamaraikannan, P., Sanjay, M. R., Bhat, K. S., Padmaraj, N. H. & Jawaid, M., 06-04-2018, (Accepted/In press) In : Journal of Natural Fibers. p. 1-8 8 p.

Research output: Contribution to journalArticle

Fibers
Natural fibers
Lignin
Tensile properties
Cellulose
6 Citations (Scopus)

CHT analysis of trailing edge region cooling in HP stage turbine blade

Kini, C. R., Yalamarty, S. S., Mendonca, R. M., Sharma, N. Y. & Shenoy, B. S., 2016, In : Indian Journal of Science and Technology. 9, 6

Research output: Contribution to journalArticle

Turbomachine blades
Turbines
Fins (heat exchange)
Cooling
Gas turbines

Combustion chamber design for efficient heat transfer

Kasturia, K., Saha, A., Singhal, A., Satish Shenoy, B. & Kini, C. R., 01-01-2019, In : ARPN Journal of Engineering and Applied Sciences. 14, 5, p. 1100-1103 4 p.

Research output: Contribution to journalArticle

Combustion chambers
Heat transfer
Engines
Gases
Diesel engines

Commercial viability of electric vehicles in India

Kumar, A., Choudhary, S. K. & Chethan, K. N., 01-06-2018, In : International Journal of Mechanical Engineering and Technology. 9, 6, p. 730-745 16 p.

Research output: Contribution to journalArticle

Electric vehicles
Greenhouse gases
Gas emissions
Commercial vehicles
Planets
1 Citation (Scopus)

Comparative approach to knee endoprosthesis stem materials-Static analysis of bone-implant system by the means of FEM

Pawlik, M., Ravishanker, B. B., Satish, S. B. & Raghuvir, P. B., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 261-267 7 p.

Research output: Contribution to journalArticle

Implant
Static analysis
Static Analysis
Bone
Finite element method

Comparative evaluation of stress distribution in bone surrounding implant using different implant biomaterials: A 3DFEA study

Haseeb, S. A., Abdul Khader, S. M., Satish Shenoy, B., Naveen, Y. G., Giridhar Kamath, P. & Vinaya, K. C., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 523-532 10 p.

Research output: Contribution to journalArticle

Biomaterials
Implant
Stress Distribution
Bone
Stress concentration
2 Citations (Scopus)
Femur
Bone
Boundary conditions
Finite element method
Bone and Bones
Implant-Supported Dental Prosthesis
Finite Element Analysis
Dentures
Bone and Bones
Mandible
2 Citations (Scopus)

Computational fluid dynamics study of airflow and microparticle deposition in a constricted pharyngeal section representing obstructive sleep apnea disease

Riazuddin, V. N., Zubair, M., Ahmadi, M., Tamagawa, M., Rashid, N. H. A., Mazlan, N. & Ahmad, K. A., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1507-1512 6 p.

Research output: Contribution to journalArticle

Obstructive Sleep Apnea
Hydrodynamics
Respiration
Airway Obstruction
Nose
5 Citations (Scopus)

Computational fluid dynamics study of pull and plug flow boundary condition on nasal airflow

Zubair, M., Riazuddin, V. N., Abdullah, M. Z., Rushdan, I., Shuaib, I. L. & Ahmad, K. A., 08-2013, In : Biomedical Engineering - Applications, Basis and Communications. 25, 4, 1350044.

Research output: Contribution to journalArticle

Hydrodynamics
Nose
Computational fluid dynamics
Boundary conditions
Physiological Phenomena
6 Citations (Scopus)

Computational fluid dynamics study of the effect of posture on airflow characteristics inside the nasal cavity

Zubair, M., Riazuddin, V. N., Abdullah, M. Z., Ismail, R., Shuaib, I. L. & Ahmad, K. A., 12-2013, In : Asian Biomedicine. 7, 6, p. 835-840 6 p.

Research output: Contribution to journalArticle

Nasal Cavity
Hydrodynamics
Posture
Nose
Tomography

Design and development of an oil preheating system to study the performance of a diesel engine

Nayak, R., Indrajith & Kini, C. R., 01-11-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 21, p. 5955-5959 5 p.

Research output: Contribution to journalArticle

Preheating
Diesel engines
Engines
Lubrication
Journal bearings
8 Citations (Scopus)

Dynamic blocked transfer stiffness method of characterizing the magnetic field and frequency dependent dynamic viscoelastic properties of MRE

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-11-2016, In : Korea Australia Rheology Journal. 28, 4, p. 301-313 13 p.

Research output: Contribution to journalArticle

Elastomers
elastomers
stiffness
Stiffness
Magnetic fields
2 Citations (Scopus)

Dynamic deformation–dependent magnetic field–induced force transmissibility characteristics of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-07-2017, In : Journal of Intelligent Material Systems and Structures. 28, 11, p. 1491-1500 10 p.

Research output: Contribution to journalArticle

Elastomers
Force measurement
Magnetic fields

Dynamic performance characteristics of finite journal bearings operating on TiO2 based nanolubricants

Binu, K. G., Yathish, K., Shenoy, B. S., Rao, D. S. & Pai, R., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 963-976 14 p.

Research output: Contribution to journalArticle

Journal bearings
nanoparticles
Nanoparticles
Lubricants
lubricants
11 Citations (Scopus)

Effect of ceramic coating in combustion and cogeneration performance of Al2O3 porous medium

Ismail, A. K., Abdullah, M. Z., Zubair, M., Jamaludin, A. R. & Ahmad, Z. A., 2016, In : Journal of the Energy Institute. 89, 1, p. 81-93 13 p.

Research output: Contribution to journalArticle

cogeneration
ceramic coatings
Ceramic coatings
Porous materials
plains
Open Access
Toughness
Acetylation
Hardness
Silanes
Fibers
1 Citation (Scopus)
Bast fibers
Polyesters
Mechanical properties
Fibers
Composite materials
23 Citations (Scopus)

Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In : Tribology International. 92, p. 462-471 10 p., 3770.

Research output: Contribution to journalArticle

hybrid composites
Graphite
Granite
granite
fillers
Dental prostheses
Implant
Fatigue Life
Fatigue of materials
Grid
6 Citations (Scopus)
turbine blades
trailing edges
gas turbines
Turbomachine blades
Gas turbines
Bearings (structural)
Journal bearings
Lubricants
Water
Reynolds equation

Effect of helix angle and cross section of helicoidal ducts in gas turbine blade cooling

Kini, C. R., Purohit, S., Bhagat, K. K. & Shenoy B., S., 01-01-2019, In : International Review of Mechanical Engineering. 13, 2, p. 87-96 10 p.

Research output: Contribution to journalArticle

Ducts
Turbomachine blades
Gas turbines
Cooling
Thermal load
29 Citations (Scopus)

Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing

Shenoy, B. S., Binu, K. G., Pai, R., Rao, D. S. & Pai, R., 01-01-2012, In : Tribology International. 45, 1, p. 38-42 5 p.

Research output: Contribution to journalArticle

Bearings (structural)
fluid films
Application programming interfaces (API)
application programming interface
Diesel engines
25 Citations (Scopus)

Effect of piezoelectric fan mode shape on the heat transfer characteristics

Fairuz, Z. M., Sufian, S. F., Abdullah, M. Z., Zubair, M. & Abdul Aziz, M. S., 03-2014, In : International Communications in Heat and Mass Transfer. 52, p. 140-151 12 p.

Research output: Contribution to journalArticle

modal response
fans
Fans
heat transfer
Heat transfer

Effect of trailing edge roundness on FX 63-137 and Selig S1223 Airfoil

Anand, S., Pandey, A., Sharma, A. & Kini, C. R., 01-10-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 19, p. 5494-5499 6 p.

Research output: Contribution to journalArticle

Airfoils
Drag coefficient
Aerodynamics
Reynolds number
Students
11 Citations (Scopus)
Bearings (structural)
fluid films
Turbulence
turbulence
lubricants
6 Citations (Scopus)

Effect of twisted tape inserts and stacks on internal cooling of gas turbine blades

Kini, C. R., Kamat, H. & Shenoy, B. S., 01-01-2016, In : Indian Journal of Science and Technology. 9, 31, 95978.

Research output: Contribution to journalArticle

Open Access
Die casting inserts
Tapes
Turbomachine blades
Gas turbines
Cooling
3 Citations (Scopus)

Effect of V-shaped ribs on internal cooling of gas turbine blades

Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In : Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Cooling
Turbines
Rotors
7 Citations (Scopus)

Effect of Wing Deformation on the Aerodynamic Performance of Flapping Wings: Fluid-Structure Interaction Approach

Fairuz, Z. M., Abdullah, M. Z., Zubair, M., Abdul Mujeebu, M., Abdullah, M. K., Yusoff, H. & Abdul Aziz, M. S., 01-07-2016, In : Journal of Aerospace Engineering. 29, 4, 4016006.

Research output: Contribution to journalArticle

Fluid structure interaction
Aerodynamics
Flexible wings
Reynolds number
Rigid wings
4 Citations (Scopus)
Bearings (structural)
Elastohydrodynamic Lubrication
Journal Bearing
Interaction Techniques
Fluid structure interaction

Emission control studies in homogeneous charge compression ignition, premixed charge compression ignition and common rail direct injection engines–a review

Rahul Chowta, P., Murthy, K. & Mahesha, G. T., 01-01-2019, (Accepted/In press) In : Biofuels.

Research output: Contribution to journalArticle

Emission control
Direct injection
emission control
Automobiles
Ignition