Research Output

Article
13 Citations (Scopus)

Effect of twisted tape inserts and stacks on internal cooling of gas turbine blades

Kini, C. R., Kamat, H. & Shenoy, B. S., 01-01-2016, In : Indian Journal of Science and Technology. 9, 31, 95978.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

Effect of V-shaped ribs on internal cooling of gas turbine blades

Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In : Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Effect of Wing Deformation on the Aerodynamic Performance of Flapping Wings: Fluid-Structure Interaction Approach

Fairuz, Z. M., Abdullah, M. Z., Zubair, M., Abdul Mujeebu, M., Abdullah, M. K., Yusoff, H. & Abdul Aziz, M. S., 01-07-2016, In : Journal of Aerospace Engineering. 29, 4, 4016006.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Elasto-hydrodynamic lubrication analysis of full 360° journal bearing using CFD and FSI techniques

Shenoy, B. S., Pai, R., Rao, D. S. & Pai, R., 01-11-2010, In : World Journal of Modelling and Simulation. 6, 4, p. 315-320 6 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Emission control studies in homogeneous charge compression ignition, premixed charge compression ignition and common rail direct injection engines–a review

Rahul Chowta, P., Murthy, K. & Mahesha, G. T., 01-01-2019, (Accepted/In press) In : Biofuels.

Research output: Contribution to journalArticle

Evaluation of image based Abbott-Firestone curve parameters using machine vision for the characterization of cylinder liner surface topography

Deepak Lawrence, K., Shanmugamani, R. & Ramamoorthy, B., 2014, In : Measurement: Journal of the International Measurement Confederation. 55, p. 318-334 17 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Evaluation of Lingual Orthodontic appliances

Mascarenhas, R., Shenoy, S., Parveen, S., Chatra, L. & Husain, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 253-260 8 p.

Research output: Contribution to journalArticle

Experimental and numerical investigation of the effects of passive vortex generators on Aludra UAV performance

Zhen, T. K., Zubair, M. & Ahmad, K. A., 10-2011, In : Chinese Journal of Aeronautics. 24, 5, p. 577-583 7 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Experimental and numerical studies of porous media combustion in micro burner

Janvekar, A. A., Abdullah, M. Z., Ahmad, Z. A., Abas, A., Zuber, M., Ismail, A. K., Hussien, A., Kataraki, P., Mohamed, M., Bashir, M., Husin, A. & Fadzli, K., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 112-120 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Experimental and numerical study of stenotic flows

Khader, S. M. A., Rajeev, R., Ayachit, A., Pai, R., Muraleedharan, C. V., Zubair, M. & Rao, V. R. K., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1500-1506 7 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-03-2018, In : Journal of Materials Science. 53, 6, p. 4229-4241 13 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Experimental study of hydrodynamic pressure distribution in oil lubricated two-axial groove journal bearing

Binu, K. G., Yathish, K., Mallya, R., Shenoy, B. S., Rao, D. S. & Pai, R., 01-01-2015, In : Materials Today: Proceedings. 2, 4-5, p. 3453-3462 10 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)
Open Access

Experiment and simulation to develop clean porous medium surface combustor using LPG

Abdul Mujeebu, M., Abdullah, M. Z. & Zuber, M., 2013, In : Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology. 33, 1, p. 55-61 7 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
Open Access
3 Citations (Scopus)

Finite element analysis of immature teeth filled with MTA, Biodentine and Bioaggregate

Eram, A., Zuber, M., Keni, L. G., Kalburgi, S., Naik, R., Bhandary, S., Amin, S. & Badruddin, I. A., 07-2020, In : Computer Methods and Programs in Biomedicine. 190, 105356.

Research output: Contribution to journalArticle

FINITE ELEMENT ANALYSIS of URINARY BLADDER WALL THICKNESS at DIFFERENT PRESSURE CONDITION

Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M. & Shenoy, B. S., 01-08-2019, In : Journal of Mechanics in Medicine and Biology. 19, 5, 1950029.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fluid Structure Interaction on Paravalvular Leakage of Transcatheter Aortic Valve Implantation Related to Aortic Stenosis: A Patient-Specific Case

Basri, A. A., Zuber, M., Basri, E. I., Zakaria, M. S., Aziz, A. F. A., Tamagawa, M. & Ahmad, K. A., 01-01-2020, In : Computational and Mathematical Methods in Medicine. 2020, 9163085.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Fluid-structure interaction study of stenotic flow in subject specific carotid bifurcation-a case study

Pai, R., Khader, S. M. A., Ayachit, A., Ahmad, K. A., Zubair, M., Rao, V. R. K. & Kamath, S. G., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1494-1499 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

GeoDesic-VPC: Spatial partitioning for multi-robot coverage problem

Nair, V. G. & Guruprasad, K. R., 01-01-2020, In : International Journal of Robotics and Automation. 35, 3, p. 189-198 10 p.

Research output: Contribution to journalArticle

GM-VPC: An Algorithm for Multi-robot Coverage of Known Spaces Using Generalized Voronoi Partition

Nair, V. G. & Guruprasad, K. R., 01-01-2019, (Accepted/In press) In : Robotica.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Haemodynamics behaviour in normal and stenosed renal artery using computational fluid dynamics

Khader, S. M. A., Azriff, A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 80-90 11 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Haemodynamics study in subject-specific abdominal aorta with renal bifurcation using CFD - A case study

Khader, S. M. A., Azriff, A., Pai, R., Zubair, M., Ahmad, K. A., Ahmad, Z. & Prakashini, K., 01-10-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 50, 2, p. 118-121 4 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Haemodynamic study of idealistic renal artery under different flow conditions

Johny, C., Abdul Khader, S. M., Raghuvir Pai, B., Zuber, M., Ahmed, K. A. & Ahmad, Z., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 541-552 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Hybrid mesh for nasal airflow studies

Zubair, M., Abdullah, M. Z. & Ahmad, K. A., 2013, In : Computational and Mathematical Methods in Medicine. 2013, 727362.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Influence of a Novel Hardener p-toluene Sulfonic Acid on Mechanical and Wear Response of Phenolic-Based Friction Materials

Pai, A., Kini, M. V. & Pokharel, V., 03-09-2017, In : Tribology Transactions. 60, 5, p. 770-780 11 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Influence of fabric orientation and compression factor on the mechanical properties of 3D E-glass reinforced epoxy composites

Nayak, S. Y., Satish, S. B., Sultan, M. T. H., Kini, C. R., Rajath Shenoy, K., Samant, R., Sarvade, P. P., Basri, A. A. & Mustapha, F., 2020, In : Journal of Materials Research and Technology. 9, 4, p. 8517-8527 11 p.

Research output: Contribution to journalArticle

Open Access

Influence of filler material on mechanical and vibration properties of basalt/epoxy composites

Surana, I., Pandya, D. J., Padmaraj, N. H., Hegde, S. & Chethan, K. N., 19-06-2019, In : Materials Research Express. 6, 8, 085342.

Research output: Contribution to journalArticle

2 Citations (Scopus)
Open Access
5 Citations (Scopus)

Investigation of tensile strength for areca frond/corn starch composites

Heckadka, S. S., Nayak, S. Y., Vikas, S. R., Kini, M. V. & Padmaraj, N. H., 01-09-2016, In : Indian Journal of Science and Technology. 9, 35, 95008.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Journal of advanced research in fluid mechanics and thermal sciences

Sreenath, J. & Pai, A., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 58-66 9 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
5 Citations (Scopus)

Mechanical characterization of aluminum 6061 with B4C and high entropy alloys

Rishi, M., Chv, S. R., Keni, L. G., Padmaraj, N. H. & Chethan, K. N., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 527-538 12 p., IJMPERDOCT201946.

Research output: Contribution to journalArticle

Mechanical Characterization of Areca husk-Coir fiber reinforced hybrid Composites

Padmaraj, N. H., Keni, L. G., Chetan, K. N. & Shetty, M., 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 1292-1297 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Mechanical response of fine laterite-modified polyester matrix composites

Pai, A., Padmaraj, N. H., Chethan, K. N. & Vibhor, S., 23-02-2017, In : Materials Research Innovations. 21, 2, p. 115-121 7 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

MR-SimExCoverage: Multi-robot Simultaneous Exploration and Coverage

Nair, V. G. & Guruprasad, K. R., 07-2020, In : Computers and Electrical Engineering. 85, 106680.

Research output: Contribution to journalArticle

Multi-surface topography targeted plateau honing for the processing of cylinder liner surfaces of automotive engines

Lawrence, K. D. & Ramamoorthy, B., 01-03-2016, In : Applied Surface Science. 365, p. 19-30 12 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)

Numerical analysis of helical grooved channels near the leading edge region in gas turbine blade

Kini, C. R., Mendonca, R. M., Yalamarty, S. S., Kamat, H. & Satish Shenoy, B., 01-01-2017, In : International Review of Mechanical Engineering. 11, 3, p. 161-166 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
1 Citation (Scopus)
Open Access
5 Citations (Scopus)

Numerical study of a nasal cavity model having a constricted pharyngeal section representing obstructive sleep apnea

Zuber, M., Riazuddin, V. N., Ahmad, K. A. & Khader, S. M. A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 219-226 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Numerical study of haemodynamics behaviour in normal and single stenosed renal artery using fluid - structure interaction

Basri, A. A., Khader, S. M. A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 91-98 8 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Numerical study of haemodynamics in abdominal aorta with renal branches using fluid – structure interaction under rest and exercise conditions

Azriff, A., Johny, C., Abdul Khader, S. M., Raghuvir Pai, B., Zuber, M., Ahmed, K. A. & Ahmad, Z., 01-01-2018, In : International Journal of Recent Technology and Engineering. 7, 4, p. 23-27 5 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)