Research Output 2009 2020

Article
3 Citations (Scopus)

Productivity enhancement in the assembly line of a horn manufacturing company

Sabatini, H., Sharanya, V., Sakthivel Anand, G. & Deepak Lawrence, K., 06-2010, In : International Journal of Management Practice. 4, 2, p. 200-215 16 p.

Research output: Contribution to journalArticle

Enhancement
Assembly line
Manufacturing companies
Productivity
Labour productivity
2 Citations (Scopus)
Axial-flow compressors
Transonic flow
Compressors
Turbomachine blades
Turbomachinery

Review on alternative propulsion in automotives-hybrid vehicles

Basavaradder, A. B., Dayananda Pai, K. & Chethan, K. N., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1311-1319 9 p.

Research output: Contribution to journalArticle

Hybrid vehicles
Propulsion
Hybrid powertrains
Automobile frames
Energy management systems
Bearings (structural)
whirl
Reynolds number
perturbation
eccentricity
12 Citations (Scopus)
Bearings (structural)
fluid films
static characteristics
Shear viscosity
Journal bearings
9 Citations (Scopus)
Bearings (structural)
static characteristics
grooves
journal bearings
Journal bearings
1 Citation (Scopus)
Open Access
Ceramics
Arthroplasty
Hip
Chromium Alloys
Hip Joint
3 Citations (Scopus)

Static thrust measurement of two types of perforated solid propellant grain configurations

Long, A. K., Zubair, M. & Ahmad, K. A., 2012, In : Journal of Aerospace Engineering. 25, 4, p. 653-659 7 p.

Research output: Contribution to journalArticle

Solid propellants
Propellants
X ray radiography
Binders
Potassium

Statistical and surface metallurgical study during electric discharge machining of Ti-6Al-4V

Shetty, R., Pai, R., Barboza, A. B. V. & Shetty, Y., 01-06-2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 11, p. 3594-3600 7 p.

Research output: Contribution to journalArticle

Electric discharge machining
Machining
Wear of materials
Metallurgy
Electrodes
19 Citations (Scopus)
Bearings (structural)
journal bearings
Journal bearings
misalignment
grooves

Study of velocity profiles of orbal biological system (OBS) using computational fluid dynamics (CFD)

Saad, N. A., Zakaria, N. A., Aziz, H. A., Abdullah, M. Z. & Zuber, M., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 447-454 8 p.

Research output: Contribution to journalArticle

Biological systems
Velocity Profile
Computational Fluid Dynamics
Biological Systems
Computational fluid dynamics
14 Citations (Scopus)

Surface topography characterization of automotive cylinder liner surfaces using fractal methods

Lawrence K, D. & Ramamoorthy, B., 01-09-2013, In : Applied Surface Science. 280, p. 332-342 11 p.

Research output: Contribution to journalArticle

Surface topography
Fractals
Bearings (structural)
Fractal dimension
Honing
2 Citations (Scopus)

Taguchi analysis of combustion of diesel and bio-diesel blend utilizing homogeneous reactor model

Pai, A., Singh, V. K., Suthar, S. & Sharma, H., 01-12-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 52, 1, p. 94-103 10 p.

Research output: Contribution to journalArticle

Biodiesel
Diesel engines
Engines
Biofuels
Engine cylinders
4 Citations (Scopus)

The hemodynamic effects of paravalvular leakage using fluid structure interaction; Transcatheter aortic valve implantation patient

Basri, A. A., Zuber, M., Zakaria, M. S., Basri, E. I., Aziz, A. F. A., Ali, R. M., Tamagawa, M. & Ahmad, K. A., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1513-1518 6 p.

Research output: Contribution to journalArticle

Aorta
Hemodynamics
Software
Reoperation
Cardiac Arrhythmias
Tires
Wear of materials
Abrasives
Abrasion
Sand
26 Citations (Scopus)

Thermal analysis of dual piezoelectric fans for cooling multi-LED packages

Sufian, S. F., Fairuz, Z. M., Zubair, M., Abdullah, M. Z. & Mohamed, J. J., 2014, In : Microelectronics Reliability. 54, 8, p. 1534-1543 10 p.

Research output: Contribution to journalArticle

fans
Thermoanalysis
Fans
Light emitting diodes
thermal analysis

Thermal management systems for EV's and HEV's

Bajaj, H. & Kini, C. R., 01-01-2019, In : ARPN Journal of Engineering and Applied Sciences. 14, 1, p. 265-269 5 p.

Research output: Contribution to journalArticle

Electric vehicles
Temperature control
Automobiles
Large scale systems
Temperature
7 Citations (Scopus)
Open Access
Turbomachine blades
Gas turbines
Cooling
Computational fluid dynamics
Temperature distribution

The Tesla Turbine - A comprehensive review

Zuber, M., Ramesh, A. & Bansal, D., 01-10-2019, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 62, 1, p. 122-137 16 p.

Research output: Contribution to journalArticle

Turbines
Boundary layers
Patents and inventions
Turbomachine blades
Power generation

Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

Research output: Contribution to journalArticle

Three-dimensional
Model
Computerized tomography
Vertex of a graph
Large Displacements

Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In : Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

Research output: Contribution to journalArticle

Palatal Expansion Technique
Cleft Lip
Cleft Palate
Bicuspid
Crowns
1 Citation (Scopus)

Three dimensional finite element stress analysis of two and four implant supported prosthesis

Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In : Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

Research output: Contribution to journalArticle

Overlay Denture
Finite Element Analysis
Prostheses and Implants
Mouth
Denture Design

Tuning of PID controller using glowworm swarm optimisation on a satellite attitude control reaction wheel

Sharma, P. & Nair, V. G., 01-07-2019, In : International Journal of Recent Technology and Engineering. 8, 2, p. 4205-4210 6 p.

Research output: Contribution to journalArticle

Open Access
Attitude control
Wheels
Tuning
Satellites
Derivatives

Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

Bast fibers
Polymers
Wear of materials
Fibers
Composite materials
Book

Effect of Turbinectomy on Aerosol dynamics inside the Human Nasal Cavity

Zuber, M., Ahmadi, M. & Nazira, V., 2017, Lambert Academic Publisher. 53 p.

Research output: Book/ReportBook

Chapter

Flow analysis inside coated porous media

Ismail, A. K., Abdullah, M. Z., Jamaludin, A. R., Zubair, M. & Ibrahim, N. H., 01-01-2019, Advanced Structured Materials. Springer Verlag, p. 153-160 8 p. (Advanced Structured Materials; vol. 102).

Research output: Chapter in Book/Report/Conference proceedingChapter

Porous materials
Porosity
Computational fluid dynamics
Coatings
Coating techniques
Comment/debate

Effect of 3-month yoga on oxidative stress in type 2 diabetes with or without complications: A controlled clinical trial (Diabetes Care (2011) 34 (2208-2210))

Hegde, S. V., Adhikari, P., Kotian, S., Pinto, V. J., D'Souza, S. & D'Souza, V., 01-04-2012, In : Diabetes Care. 35, 4, 1 p.

Research output: Contribution to journalComment/debate

Selected peer-reviewed articles from the first international conference on healthcare and technical research (ICHTR 2015), Manipal, India, 22–24 december, 2015

Udupa, N., Shenoy, B. S., Radhakrishnan, R., Janodia, M. D., Chaudhary, S., Devkar, R. A., Jain, P. & Menon, S., 01-03-2017, In : Advanced Science Letters. 23, 3, p. 1714-1717 4 p.

Research output: Contribution to journalComment/debate

Conference article
1 Citation (Scopus)

A practical approach in porous medium combustion for domestic application: A review

Ismail, A. K., Ibrahim, N. H., Shamsuddin, K. A., Abdullah, M. Z. & Zubair, M., 01-06-2018, In : IOP Conference Series: Materials Science and Engineering. 370, 1, 012004.

Research output: Contribution to journalConference article

Porous materials
Compressed air
Fuel burners
Industrial applications
Coatings
14 Citations (Scopus)

Development of short areca fiber reinforced biodegradable composite material

Padmaraj, N. H., Kini, M. V., Pai, B. R. & Shenoy, B. S., 01-01-2013, In : Procedia Engineering. 64, p. 966-972 7 p.

Research output: Contribution to journalConference article

Open Access
Fibers
Composite materials
Plasticizers
Starch
Water
1 Citation (Scopus)

Effect of bamboo char and boron carbide particles on mechanical characteristics of Aluminum 6061 hybrid composites

Chethan, K. N., Pai, A., Padmaraj, N. H., Singhal, A. & Sinha, S., 13-07-2018, In : IOP Conference Series: Materials Science and Engineering. 377, 1, 012038.

Research output: Contribution to journalConference article

Boron carbide
Bamboo
Aluminum
Metals
Hardness
1 Citation (Scopus)

Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal

Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In : Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.

Research output: Contribution to journalConference article

Charcoal
Aluminum
Bamboo
Fabrication
Hardness
2 Citations (Scopus)

Fabrication and tribological response of aluminium 6061 hybrid composite reinforced with bamboo char and boron carbide micro-fillers

Chethan, K. N., Pai, A., Keni, L. G., Singhal, A. & Sinha, S., 03-03-2018, In : IOP Conference Series: Materials Science and Engineering. 310, 1, 012028.

Research output: Contribution to journalConference article

Boron carbide
Charcoal
Bamboo
Aluminum
Fillers
1 Citation (Scopus)

Influence of marine environment on mechanical properties of glass fiber reinforced composites

Padmaraj, N. H., Chethan, K. N., Utkarsh, S., Banerjee, S. & Utkarsh, 13-07-2018, In : IOP Conference Series: Materials Science and Engineering. 377, 1, 012132.

Research output: Contribution to journalConference article

Glass fibers
Mechanical properties
Polyesters
Water
Composite materials

Recent Advances in Substrate Materials and Thermal Analysis of Catalytic Converters

Pai, D. & Prabhu, M. K., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24221-24230 10 p.

Research output: Contribution to journalConference article

Catalytic converters
Thermoanalysis
Substrates
Foams
Heat transfer
1 Citation (Scopus)
Turbomachinery
Engines
Propulsion
Turboprop engines
Turbojet engines

Review of natural fiber composites

Rohan, T., Tushar, B. & Mahesha, G. T., 01-03-2018, In : IOP Conference Series: Materials Science and Engineering. 314, 1, 012020.

Research output: Contribution to journalConference article

Natural fibers
Composite materials
Bearings (structural)
Interiors (building)
Natural resources
3 Citations (Scopus)

Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In : Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

Research output: Contribution to journalConference article

Joint prostheses
Orthopedics
Biocompatible Materials
Biomaterials
Wear of materials
Conference contribution
14 Citations (Scopus)

A computational conjugate thermal analysis of HP stage turbine blade cooling with innovative cooling passage geometries

Kini, C. R., Satish, S. B. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. p. 2168-2173 6 p. (Proceedings of the World Congress on Engineering 2011, WCE 2011; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbine Blade
Thermal Analysis
Thermoanalysis
Turbomachine blades
Cooling
2 Citations (Scopus)

A review on the impact of aircraft cabin air quality and cabin pressure on human wellbeing

Zubair, M., Ahmad, K. A. & Riazuddin, V. N., 2014, AEROTECH V: Progressive Aerospace Research. Trans Tech Publications Ltd, Vol. 629. p. 388-394 7 p. (Applied Mechanics and Materials; vol. 629).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cabins (aircraft)
Air quality
Health
Viruses
Aircraft

Biodegradable natural fiber reinforced polymer matrix composites: Technical updates

Mahesha, G. T., Subrahmanya, B. K. & Padmaraja, N. H., 25-10-2019, International Conference on Inventive Material Science Applications, ICIMA 2019. Bindhu, V. (ed.). American Institute of Physics Inc., 020001. (AIP Conference Proceedings; vol. 2166).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
polymer matrix composites
fibers
acetylation
composite materials
polymers
2 Citations (Scopus)

Computational fluid dynamics study of middle turbinectomy

Zuber, M., Ahmad, K. A., Abdullah, M. Z., Hamid, S. A., Ismail, R. & Shuaib, I. L., 2012, 2012 International Conference on Biomedical Engineering, ICoBE 2012. p. 338-341 4 p. 6179034

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational fluid dynamics
Flow rate
2 Citations (Scopus)

Computational fluid dynamics study of the aortic valve opening on hemodynamics characteristics

Basri, A. A., Zubair, M., Aziz, A. F. A., Ali, R. M., Tamagawa, M. & Ahmad, K. A., 23-02-2015, IECBES 2014, Conference Proceedings - 2014 IEEE Conference on Biomedical Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet". Institute of Electrical and Electronics Engineers Inc., p. 99-102 4 p. 7047660

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hemodynamics
Computational fluid dynamics
Geometry

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Bearing pads
Turbulence
Fluids
Reynolds equation

Manhattan distance based Voronoi partitioning for efficient multi-robot coverage

Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 81-90 10 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots

Multi-robot coverage using Voronoi partitioning based on geodesic distance

Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 59-66 8 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Demonstrations

Numerical sensitivity analysis of axial flow fan 3d aerodynamics under off design conditions

Akula, P. K., Singh, B. & Nair, V. G., 2012, AEROTECH IV - Recent Advances in Aerospace Technologies. Vol. 225. p. 8-12 5 p. (Applied Mechanics and Materials; vol. 225).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial flow
Fans
Sensitivity analysis
Compressors
Aerodynamics

Paper piano-Shadow analysis based touch interaction

Vishal, B. & Lawrence, K. D., 07-03-2018, Proceedings - 2017 2nd International Conference on Man and Machine Interfacing, MAMI 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-March. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
Human computer interaction
Labeling
Computer vision
Acoustic waves

Simultaneous exploration and coverage by a mobile robot

Mohammad Minhaz Falaki, P. M., Padman, A., Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 33-41 9 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mobile robots
Robots
Motion planning
2 Citations (Scopus)

Study of the influence of normal and high blood pressure on normal and stenosed carotid bifurcation using fluid-structure interaction

Abdul Khader, S. M. A., Ayachit, A., Pai, R., Zubair & Ahmed, K. A., 2013, Mechanical and Manufacturing Engineering. Vol. 315. p. 982-986 5 p. (Applied Mechanics and Materials; vol. 315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fluid structure interaction
Blood pressure
Blood vessels
Transient analysis
Mechanics