Department of Aeronautical and Automobile Engineering, Manipal Institute of Technology, Manipal

  • India

Research Output

Conference article

Fabrication and tribological response of aluminium 6061 hybrid composite reinforced with bamboo char and boron carbide micro-fillers

Chethan, K. N., Pai, A., Keni, L. G., Singhal, A. & Sinha, S., 03-03-2018, In : IOP Conference Series: Materials Science and Engineering. 310, 1, 012028.

Research output: Contribution to journal › Conference article

4 Citations (Scopus)

Heat treatment and mechanical characterization of LM-25/tungsten carbide metal matrix composites

Hegde, N. T., Pai, D. & Hegde, R., 01-01-2019, In : Materials Today: Proceedings. 19, p. 810-817 8 p.

Research output: Contribution to journal › Conference article

1 Citation (Scopus)

Influence of marine environment on mechanical properties of glass fiber reinforced composites

Padmaraj, N. H., Chethan, K. N., Utkarsh, S., Banerjee, S. & Utkarsh, 13-07-2018, In : IOP Conference Series: Materials Science and Engineering. 377, 1, 012132.

Research output: Contribution to journal › Conference article

1 Citation (Scopus)

Recent Advances in Substrate Materials and Thermal Analysis of Catalytic Converters

Pai, D. & Prabhu, M. K., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24221-24230 10 p.

Research output: Contribution to journal › Conference article

Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications

Srinivas, G., Raghunandana, K. & Satish Shenoy, B., 01-03-2018, In : IOP Conference Series: Materials Science and Engineering. 314, 1, 012012.

Research output: Contribution to journal › Conference article

1 Citation (Scopus)

Review of natural fiber composites

Rohan, T., Tushar, B. & Mahesha, G. T., 01-03-2018, In : IOP Conference Series: Materials Science and Engineering. 314, 1, 012020.

Research output: Contribution to journal › Conference article

1 Citation (Scopus)

Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In : Materials Today: Proceedings. 19, p. 658-662 5 p.

Research output: Contribution to journal › Conference article

1 Citation (Scopus)

Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In : Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

Research output: Contribution to journal › Conference article

8 Citations (Scopus)

Simulation and Comparative performance analysis of Modified Cyclone Dust Separator

Bhade, S. & Hegde, S., 09-12-2019, In : IOP Conference Series: Materials Science and Engineering. 577, 1, 012026.

Research output: Contribution to journal › Conference article

Open Access
Conference contribution

A computational conjugate thermal analysis of HP stage turbine blade cooling with innovative cooling passage geometries

Kini, C. R., Satish, S. B. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. p. 2168-2173 6 p. (Proceedings of the World Congress on Engineering 2011, WCE 2011; vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

14 Citations (Scopus)

Application of Coverage Path Planning Algorithm for Milling Operations

Kalburgi, S., Nair, V. G. & Guruprasad, K. R., 01-01-2020, Intelligent Systems, Technologies and Applications - Proceedings of 5th ISTA 2019. Thampi, S. M., Trajkovic, L., Mitra, S., Nagabhushan, P., El-Alfy, E-S. M., Bojkovic, Z. & Mishra, D. (eds.). Springer Paris, p. 213-220 8 p. (Advances in Intelligent Systems and Computing; vol. 1148).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

A review on the impact of aircraft cabin air quality and cabin pressure on human wellbeing

Zubair, M., Ahmad, K. A. & Riazuddin, V. N., 2014, AEROTECH V: Progressive Aerospace Research. Trans Tech Publications Ltd, Vol. 629. p. 388-394 7 p. (Applied Mechanics and Materials; vol. 629).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Biodegradable natural fiber reinforced polymer matrix composites: Technical updates

Mahesha, G. T., Subrahmanya, B. K. & Padmaraja, N. H., 25-10-2019, International Conference on Inventive Material Science Applications, ICIMA 2019. Bindhu, V. (ed.). American Institute of Physics Inc., 020001. (AIP Conference Proceedings; vol. 2166).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Open Access
1 Citation (Scopus)

Computational fluid dynamics study of middle turbinectomy

Zuber, M., Ahmad, K. A., Abdullah, M. Z., Hamid, S. A., Ismail, R. & Shuaib, I. L., 2012, 2012 International Conference on Biomedical Engineering, ICoBE 2012. p. 338-341 4 p. 6179034

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

Computational fluid dynamics study of the aortic valve opening on hemodynamics characteristics

Basri, A. A., Zubair, M., Aziz, A. F. A., Ali, R. M., Tamagawa, M. & Ahmad, K. A., 23-02-2015, IECBES 2014, Conference Proceedings - 2014 IEEE Conference on Biomedical Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet". Institute of Electrical and Electronics Engineers Inc., p. 99-102 4 p. 7047660

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

4 Citations (Scopus)

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Manhattan distance based Voronoi partitioning for efficient multi-robot coverage

Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 81-90 10 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Multi-robot coverage using Voronoi partitioning based on geodesic distance

Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 59-66 8 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Numerical sensitivity analysis of axial flow fan 3d aerodynamics under off design conditions

Akula, P. K., Singh, B. & Nair, V. G., 2012, AEROTECH IV - Recent Advances in Aerospace Technologies. Vol. 225. p. 8-12 5 p. (Applied Mechanics and Materials; vol. 225).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Paper piano-Shadow analysis based touch interaction

Vishal, B. & Lawrence, K. D., 07-03-2018, Proceedings - 2017 2nd International Conference on Man and Machine Interfacing, MAMI 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-March. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Simultaneous exploration and coverage by a mobile robot

Mohammad Minhaz Falaki, P. M., Padman, A., Nair, V. G. & Guruprasad, K. R., 01-01-2020, Control Instrumentation Systems - Proceedings of CISCON 2018. Shreesha, C. & Gudi, R. D. (eds.). Springer Verlag, p. 33-41 9 p. (Lecture Notes in Electrical Engineering; vol. 581).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Study of the influence of normal and high blood pressure on normal and stenosed carotid bifurcation using fluid-structure interaction

Abdul Khader, S. M. A., Ayachit, A., Pai, R., Zubair & Ahmed, K. A., 2013, Mechanical and Manufacturing Engineering. Vol. 315. p. 982-986 5 p. (Applied Mechanics and Materials; vol. 315).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)
Editorial

A special section on computational methods in health and biological sciences

Ahmad, K. A., Tamagawa, M. & Zuber, M., 01-10-2016, In : Journal of Medical Imaging and Health Informatics. 6, 6, p. 1475-1477 3 p.

Research output: Contribution to journal › Editorial

Preface

Pai, R., Shenoy, S. & Khader, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 217-218 2 p.

Research output: Contribution to journal › Editorial

Review article

Innovations and recent trends in Shape Memory Alloy: A review

Kawate, S. S., Chethan, K. N., Keni, L. G., Pai, A. & Padmaraj, N. H., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 4, p. 2172-2177 6 p.

Research output: Contribution to journal › Review article

2 Citations (Scopus)

Performance studies on non-edible oil as IC engine fuels: A review

Krishna, K., Murthy, K. & Mahesha, G. T., 01-01-2019, In : Nature Environment and Pollution Technology. 18, 4, p. 1185-1192 8 p.

Research output: Contribution to journal › Review article

Recent trends in aerodynamic performance developments of automobile vehicles: A review

Rohit, R., Kini, C. R. & Srinivas, G., 01-01-2019, In : Journal of Mechanical Engineering Research and Developments. 42, 4, p. 206-214 9 p.

Research output: Contribution to journal › Review article

Open Access

Review: A critical overview of limitations of cfd modeling in nasal airflow

Zubair, M., Abdullah, M. Z., Ismail, R., Shuaib, I. L., Hamid, S. A. & Ahmad, K. A., 2012, In : Journal of Medical and Biological Engineering. 32, 2, p. 77-84 8 p.

Research output: Contribution to journal › Review article

33 Citations (Scopus)

Review on impact response of polymer composites

Zubair, M. & Pai, Y., 01-01-2019, In : Journal of Mechanical Engineering Research and Developments. 42, 4, p. 238-242 5 p.

Research output: Contribution to journal › Review article

Open Access