Research Output

2019

Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

Research output: Contribution to journalArticle

Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In : Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

Research output: Contribution to journalArticle

Open Access
2018

Application of finite element analysis on balloon expandable coronary stents: A review

Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

Research output: Contribution to journalArticle

Open Access

A practical approach in porous medium combustion for domestic application: A review

Ismail, A. K., Ibrahim, N. H., Shamsuddin, K. A., Abdullah, M. Z. & Zubair, M., 01-06-2018, In : IOP Conference Series: Materials Science and Engineering. 370, 1, 012004.

Research output: Contribution to journalConference article

3 Citations (Scopus)

Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-20 20 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Centroidal voronoi partitioning using virtual nodes for multirobot coverage

Nair, V. G. & Guruprasad, K. R., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 2, p. 135-139 5 p.

Research output: Contribution to journalArticle

Characterization of natural cellulosic fiber from bark of Albizia amara

Senthamaraikannan, P., Sanjay, M. R., Bhat, K. S., Padmaraj, N. H. & Jawaid, M., 06-04-2018, (Accepted/In press) In : Journal of Natural Fibers. p. 1-8 8 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Commercial viability of electric vehicles in India

Kumar, A., Choudhary, S. K. & Chethan, K. N., 01-06-2018, In : International Journal of Mechanical Engineering and Technology. 9, 6, p. 730-745 16 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
4 Citations (Scopus)
1 Citation (Scopus)
2 Citations (Scopus)
2 Citations (Scopus)

Experimental and numerical studies of porous media combustion in micro burner

Janvekar, A. A., Abdullah, M. Z., Ahmad, Z. A., Abas, A., Zuber, M., Ismail, A. K., Hussien, A., Kataraki, P., Mohamed, M., Bashir, M., Husin, A. & Fadzli, K., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 112-120 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-03-2018, In : Journal of Materials Science. 53, 6, p. 4229-4241 13 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal

Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In : Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)
4 Citations (Scopus)

Haemodynamics behaviour in normal and stenosed renal artery using computational fluid dynamics

Khader, S. M. A., Azriff, A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 80-90 11 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Haemodynamics study in subject-specific abdominal aorta with renal bifurcation using CFD - A case study

Khader, S. M. A., Azriff, A., Pai, R., Zubair, M., Ahmad, K. A., Ahmad, Z. & Prakashini, K., 01-10-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 50, 2, p. 118-121 4 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
1 Citation (Scopus)

Influence of marine environment on mechanical properties of glass fiber reinforced composites

Padmaraj, N. H., Chethan, K. N., Utkarsh, S., Banerjee, S. & Utkarsh, 13-07-2018, In : IOP Conference Series: Materials Science and Engineering. 377, 1, 012132.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Innovations and recent trends in Shape Memory Alloy: A review

Kawate, S. S., Chethan, K. N., Keni, L. G., Pai, A. & Padmaraj, N. H., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 4, p. 2172-2177 6 p.

Research output: Contribution to journalReview article

2 Citations (Scopus)

Journal of advanced research in fluid mechanics and thermal sciences

Sreenath, J. & Pai, A., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 58-66 9 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Mechanical Characterization of Areca husk-Coir fiber reinforced hybrid Composites

Padmaraj, N. H., Keni, L. G., Chetan, K. N. & Shetty, M., 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 1292-1297 6 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
1 Citation (Scopus)

Numerical study of haemodynamics behaviour in normal and single stenosed renal artery using fluid - structure interaction

Basri, A. A., Khader, S. M. A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 91-98 8 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Numerical study of haemodynamics in abdominal aorta with renal branches using fluid – structure interaction under rest and exercise conditions

Azriff, A., Johny, C., Abdul Khader, S. M., Raghuvir Pai, B., Zuber, M., Ahmed, K. A. & Ahmad, Z., 01-01-2018, In : International Journal of Recent Technology and Engineering. 7, 4, p. 23-27 5 p.

Research output: Contribution to journalArticle

Paper piano-Shadow analysis based touch interaction

Vishal, B. & Lawrence, K. D., 07-03-2018, Proceedings - 2017 2nd International Conference on Man and Machine Interfacing, MAMI 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-March. p. 1-6 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Performance of a monarch butterfly for various flapping angle

Aaroh, Zuber, M., Khader, S. M. A., Kalburgi, S., Basri, E. I. & Ahmad, K. A., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 4, p. 126-130 5 p.

Research output: Contribution to journalArticle

Recent Advances in Substrate Materials and Thermal Analysis of Catalytic Converters

Pai, D. & Prabhu, M. K., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24221-24230 10 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Review of natural fiber composites

Rohan, T., Tushar, B. & Mahesha, G. T., 01-03-2018, In : IOP Conference Series: Materials Science and Engineering. 314, 1, 012020.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Review on alternative propulsion in automotives-hybrid vehicles

Basavaradder, A. B., Dayananda Pai, K. & Chethan, K. N., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1311-1319 9 p.

Research output: Contribution to journalArticle

Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In : Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Statistical and surface metallurgical study during electric discharge machining of Ti-6Al-4V

Shetty, R., Pai, R., Barboza, A. B. V. & Shetty, Y., 01-06-2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 11, p. 3594-3600 7 p.

Research output: Contribution to journalArticle

Taguchi analysis of combustion of diesel and bio-diesel blend utilizing homogeneous reactor model

Pai, A., Singh, V. K., Suthar, S. & Sharma, H., 01-12-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 52, 1, p. 94-103 10 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Three dimensional finite element stress analysis of two and four implant supported prosthesis

Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In : Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2017

A computational fluid dynamics study of combustion and emission performance in an annular combustor of a jet engine

Zuber, M., Hisham, M. S. B., Nasir, N. A. M., Basri, A. A. & Khader, S. M. A., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 1019-1028 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Comparative approach to knee endoprosthesis stem materials-Static analysis of bone-implant system by the means of FEM

Pawlik, M., Ravishanker, B. B., Satish, S. B. & Raghuvir, P. B., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 261-267 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Design and development of an oil preheating system to study the performance of a diesel engine

Nayak, R., Indrajith & Kini, C. R., 01-11-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 21, p. 5955-5959 5 p.

Research output: Contribution to journalArticle

Dynamic deformation–dependent magnetic field–induced force transmissibility characteristics of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-07-2017, In : Journal of Intelligent Material Systems and Structures. 28, 11, p. 1491-1500 10 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Dynamic performance characteristics of finite journal bearings operating on TiO2 based nanolubricants

Binu, K. G., Yathish, K., Shenoy, B. S., Rao, D. S. & Pai, R., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 963-976 14 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
6 Citations (Scopus)

Effect of trailing edge roundness on FX 63-137 and Selig S1223 Airfoil

Anand, S., Pandey, A., Sharma, A. & Kini, C. R., 01-10-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 19, p. 5494-5499 6 p.

Research output: Contribution to journalArticle