Research Output 2009 2019

Filter
Article
2019
1 Citation (Scopus)
Overlay Denture
Finite Element Analysis
Mandible
Neck
Software

Combustion chamber design for efficient heat transfer

Kasturia, K., Saha, A., Singhal, A., Satish Shenoy, B. & Kini, C. R., 01-01-2019, In : ARPN Journal of Engineering and Applied Sciences. 14, 5, p. 1100-1103 4 p.

Research output: Contribution to journalArticle

Combustion chambers
Heat transfer
Engines
Gases
Diesel engines

Thermal management systems for EV's and HEV's

Bajaj, H. & Kini, C. R., 01-01-2019, In : ARPN Journal of Engineering and Applied Sciences. 14, 1, p. 265-269 5 p.

Research output: Contribution to journalArticle

Electric vehicles
Temperature control
Automobiles
Large scale systems
Temperature
2018

Application of finite element analysis on balloon expandable coronary stents: A review

Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

Research output: Contribution to journalArticle

Finite Element Analysis
Stents
Balloons
Finite element method
Arteries

Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-20 20 p.

Research output: Contribution to journalArticle

Axial-flow compressors
Transonic flow
Compressors
Rotors
Stream flow
Bicuspid
Pulp
Tooth
Incisor
Crowns

Biomechanics of hip joint: A systematic review

Chethan, K. N., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1672-1676 5 p.

Research output: Contribution to journalArticle

Biomechanics
Hip Joint
Joint prostheses
Biomechanical Phenomena
Biocompatible Materials

Centroidal voronoi partitioning using virtual nodes for multirobot coverage

Nair, V. G. & Guruprasad, K. R., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 2, p. 135-139 5 p.

Research output: Contribution to journalArticle

Robots
Robotics

Commercial viability of electric vehicles in India

Kumar, A., Choudhary, S. K. & Chethan, K. N., 01-06-2018, In : International Journal of Mechanical Engineering and Technology. 9, 6, p. 730-745 16 p.

Research output: Contribution to journalArticle

Electric vehicles
Greenhouse gases
Gas emissions
Commercial vehicles
Planets
1 Citation (Scopus)
Femur
Bone
Boundary conditions
Finite element method
Bone and Bones
Implant-Supported Dental Prosthesis
Finite Element Analysis
Dentures
Bone and Bones
Mandible

Effect of fiber treatments on mechanical properties of Grewia serrulata bast fiber reinforced polyester composites

Mahesha, G. T., Shenoy, S. B., Kini, V. M. & Padmaraja, N. H., 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 138-144 7 p.

Research output: Contribution to journalArticle

Bast fibers
Polyesters
Mechanical properties
Fibers
Composite materials
1 Citation (Scopus)

Experimental and numerical studies of porous media combustion in micro burner

Janvekar, A. A., Abdullah, M. Z., Ahmad, Z. A., Abas, A., Zuber, M., Ismail, A. K., Hussien, A., Kataraki, P., Mohamed, M., Bashir, M., Husin, A. & Fadzli, K., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 112-120 9 p.

Research output: Contribution to journalArticle

Fuel burners
Porous materials
Dental Porcelain
Porcelain
Aluminum Oxide
5 Citations (Scopus)

Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-03-2018, In : Journal of Materials Science. 53, 6, p. 4229-4241 13 p.

Research output: Contribution to journalArticle

Elastomers
Carbon Nanotubes
Carbon nanotubes
Fillers
Stiffness
2 Citations (Scopus)

Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

Bone
Polyethylene
Shielding
Polyethylenes
Metals
Axial-flow compressors
Air
Engines
Aircraft
Machinery
2 Citations (Scopus)

Haemodynamics behaviour in normal and stenosed renal artery using computational fluid dynamics

Khader, S. M. A., Azriff, A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 80-90 11 p.

Research output: Contribution to journalArticle

Hemodynamics
Computational fluid dynamics
Pulsatile flow
Tomography
Shear stress
1 Citation (Scopus)

Haemodynamics study in subject-specific abdominal aorta with renal bifurcation using CFD - A case study

Khader, S. M. A., Azriff, A., Pai, R., Zubair, M., Ahmad, K. A., Ahmad, Z. & Prakashini, K., 01-10-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 50, 2, p. 118-121 4 p.

Research output: Contribution to journalArticle

Hemodynamics
Computational fluid dynamics
Computerized tomography
Flow patterns
Shear stress
Ducts
Turbomachine blades
Computational fluid dynamics
Turbines
Heat transfer
2 Citations (Scopus)

Journal of advanced research in fluid mechanics and thermal sciences

Sreenath, J. & Pai, A., 01-03-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 58-66 9 p.

Research output: Contribution to journalArticle

Biofuels
Fluid mechanics
Biodiesel
Fossil fuels
Oils

Mechanical Characterization of Areca husk-Coir fiber reinforced hybrid Composites

Padmaraj, N. H., Keni, L. G., Chetan, K. N. & Shetty, M., 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 1292-1297 6 p.

Research output: Contribution to journalArticle

Areca
Fibers
Composite materials
Sodium Hydroxide
Polyester resins
1 Citation (Scopus)
Stents
Balloons
Hemodynamics
Struts
Shear stress
2 Citations (Scopus)

Numerical study of haemodynamics behaviour in normal and single stenosed renal artery using fluid - structure interaction

Basri, A. A., Khader, S. M. A., Johny, C., Pai, R., Zuber, M., Ahmad, K. A. & Ahmad, Z., 01-11-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 51, 1, p. 91-98 8 p.

Research output: Contribution to journalArticle

Fluid structure interaction
Hemodynamics
Blood
Blood pressure
Transient analysis

Numerical study of haemodynamics in abdominal aorta with renal branches using fluid – structure interaction under rest and exercise conditions

Azriff, A., Johny, C., Abdul Khader, S. M., Raghuvir Pai, B., Zuber, M., Ahmed, K. A. & Ahmad, Z., 01-01-2018, In : International Journal of Recent Technology and Engineering. 7, 4, p. 23-27 5 p.

Research output: Contribution to journalArticle

Fluid structure interaction
Hemodynamics
Blood
Pulsatile flow
Transient analysis
1 Citation (Scopus)

Patient-specific static structural analysis of femur bone of different lengths

Chethan, K. N., Bhat, S. N., Zuber, M. & Shenoy, S. B., 01-01-2018, In : Open Biomedical Engineering Journal. 12, 1, p. 108-114 7 p.

Research output: Contribution to journalArticle

Structural analysis
Bearings (structural)
Femur
Bone
Bone and Bones

Performance of a monarch butterfly for various flapping angle

Aaroh, Zuber, M., Khader, S. M. A., Kalburgi, S., Basri, E. I. & Ahmad, K. A., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 4, p. 126-130 5 p.

Research output: Contribution to journalArticle

Butterflies
Aerodynamics
Computer aided design
Insects

Review on alternative propulsion in automotives-hybrid vehicles

Basavaradder, A. B., Dayananda Pai, K. & Chethan, K. N., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1311-1319 9 p.

Research output: Contribution to journalArticle

Hybrid vehicles
Propulsion
Hybrid powertrains
Automobile frames
Energy management systems

Statistical and surface metallurgical study during electric discharge machining of Ti-6Al-4V

Shetty, R., Pai, R., Barboza, A. B. V. & Shetty, Y., 01-06-2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 11, p. 3594-3600 7 p.

Research output: Contribution to journalArticle

Electric discharge machining
Machining
Wear of materials
Metallurgy
Electrodes
1 Citation (Scopus)

Taguchi analysis of combustion of diesel and bio-diesel blend utilizing homogeneous reactor model

Pai, A., Singh, V. K., Suthar, S. & Sharma, H., 01-12-2018, In : Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 52, 1, p. 94-103 10 p.

Research output: Contribution to journalArticle

Biodiesel
Diesel engines
Engines
Biofuels
Engine cylinders

Three dimensional finite element stress analysis of two and four implant supported prosthesis

Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In : Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

Research output: Contribution to journalArticle

Overlay Denture
Finite Element Analysis
Prostheses and Implants
Mouth
Denture Design

Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

Bast fibers
Polymers
Wear of materials
Fibers
Composite materials
2017

A computational fluid dynamics study of combustion and emission performance in an annular combustor of a jet engine

Zuber, M., Hisham, M. S. B., Nasir, N. A. M., Basri, A. A. & Khader, S. M. A., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 1019-1028 10 p.

Research output: Contribution to journalArticle

Nitrogen Oxides
air transportation
Aviation
Jet engines
Hydrodynamics
1 Citation (Scopus)

Comparative approach to knee endoprosthesis stem materials-Static analysis of bone-implant system by the means of FEM

Pawlik, M., Ravishanker, B. B., Satish, S. B. & Raghuvir, P. B., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 261-267 7 p.

Research output: Contribution to journalArticle

Implant
Static analysis
Static Analysis
Bone
Finite element method

Design and development of an oil preheating system to study the performance of a diesel engine

Nayak, R., Indrajith & Kini, C. R., 01-11-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 21, p. 5955-5959 5 p.

Research output: Contribution to journalArticle

Preheating
Diesel engines
Engines
Lubrication
Journal bearings
2 Citations (Scopus)

Dynamic deformation–dependent magnetic field–induced force transmissibility characteristics of magnetorheological elastomer

Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-07-2017, In : Journal of Intelligent Material Systems and Structures. 28, 11, p. 1491-1500 10 p.

Research output: Contribution to journalArticle

Elastomers
Force measurement
Magnetic fields

Dynamic performance characteristics of finite journal bearings operating on TiO2 based nanolubricants

Binu, K. G., Yathish, K., Shenoy, B. S., Rao, D. S. & Pai, R., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 963-976 14 p.

Research output: Contribution to journalArticle

Journal bearings
nanoparticles
Nanoparticles
Lubricants
lubricants
Dental prostheses
Implant
Fatigue Life
Fatigue of materials
Grid
5 Citations (Scopus)
turbine blades
trailing edges
gas turbines
Turbomachine blades
Gas turbines

Effect of trailing edge roundness on FX 63-137 and Selig S1223 Airfoil

Anand, S., Pandey, A., Sharma, A. & Kini, C. R., 01-10-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 19, p. 5494-5499 6 p.

Research output: Contribution to journalArticle

Airfoils
Drag coefficient
Aerodynamics
Reynolds number
Students
2 Citations (Scopus)

Effect of V-shaped ribs on internal cooling of gas turbine blades

Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In : Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Cooling
Turbines
Rotors

Evaluation of Lingual Orthodontic appliances

Mascarenhas, R., Shenoy, S., Parveen, S., Chatra, L. & Husain, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 253-260 8 p.

Research output: Contribution to journalArticle

Brackets
Finite element method
Ligaments
Evaluation
Bone

Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading

Padmaraj, N. H., Chethan, K. N., Pavan & Onkar, A., 07-09-2017, In : IOP Conference Series: Materials Science and Engineering. 225, 1, 012017.

Research output: Contribution to journalArticle

Jute fibers
Fatigue of materials
Composite materials
Curve fitting
Alkalies
1 Citation (Scopus)
Fluid structure interaction
Turbomachine blades
Gas turbines
Cooling
Ducts

Influence of a Novel Hardener p-toluene Sulfonic Acid on Mechanical and Wear Response of Phenolic-Based Friction Materials

Pai, A., Kini, M. V. & Pokharel, V., 03-09-2017, In : Tribology Transactions. 60, 5, p. 770-780 11 p.

Research output: Contribution to journalArticle

hardeners
Friction materials
sulfonic acid
linings
Linings

Mechanical Characterization and Water Ageing Behavior Studies of Grewia Serrulata Bast Fiber Reinforced Thermoset Composites

Mahesha, G. T., Satish, S. B., Kini, M. V. & Subrahmanya, B. K., 02-11-2017, In : Journal of Natural Fibers. 14, 6, p. 788-800 13 p.

Research output: Contribution to journalArticle

Bast fibers
Thermosets
Aging of materials
Polyesters
Water
3 Citations (Scopus)

Mechanical response of fine laterite-modified polyester matrix composites

Pai, A., Padmaraj, N. H., Chethan, K. N. & Vibhor, S., 23-02-2017, In : Materials Research Innovations. 21, 2, p. 115-121 7 p.

Research output: Contribution to journalArticle

laterites
Polyesters
polyesters
composite materials
Composite materials
2 Citations (Scopus)

Numerical analysis of helical grooved channels near the leading edge region in gas turbine blade

Kini, C. R., Mendonca, R. M., Yalamarty, S. S., Kamat, H. & Satish Shenoy, B., 2017, In : International Review of Mechanical Engineering. 11, 3, p. 161-166 6 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Numerical analysis
Turbines
Cooling

Numerical study of a nasal cavity model having a constricted pharyngeal section representing obstructive sleep apnea

Zuber, M., Riazuddin, V. N., Ahmad, K. A. & Khader, S. M. A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 219-226 8 p.

Research output: Contribution to journalArticle

Sleep
Numerical Study
Cavity
Pressure Drop
Pressure drop
1 Citation (Scopus)
Launch vehicles
Particle swarm optimization (PSO)
Trajectories
Angle of attack
MATLAB
1 Citation (Scopus)
Aircraft control
Particle swarm optimization (PSO)
Derivatives
Control systems
Tuning