Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

  • India

  • Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

    576104 Manipal

    India

Research Output 1977 2019

2019

A comparative study on the effect of stress in dental implant structure using finite element analysis

Patil, V., Noronha, D. J., Naik, N. & Shettar, M., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 709-717 9 p.

Research output: Contribution to journalArticle

Dental prostheses
Finite element method
Stress concentration
Bone
Chromium Alloys
2 Citations (Scopus)
Glass fibers
Drilling
Machining
Polymers
Composite materials

Analysis of drag and lift forces in different tailed ground effect vehicles

Hiremath, P., Shettar, M., Suhas Kowshik, C. S., Rajath, J. & Sukhesh, P. D., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1399-1412 14 p.

Research output: Contribution to journalArticle

Air cushion vehicles
Drag
Inlet flow
Boundary conditions

Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing

Hariharan, G. & Pai, R., 12-08-2019, In : Industrial Lubrication and Tribology. 71, 6, p. 803-809 7 p.

Research output: Contribution to journalArticle

Bearings (structural)
Bearing pads
Fluids
Hydrodynamics
Reynolds equation

An innovative surface morphology for a solar air heater to augment its performance

Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-01-2019, In : Procedia Manufacturing. 35, p. 1087-1095 9 p.

Research output: Contribution to journalConference article

Open Access
Ducts
Surface morphology
Air
Kinetic energy
Conversion efficiency

An investigation into tapping of Al6061/SiC metal matrix composite with straight flute HSS machine tap

Nagaraja, Adhikari, R. & Yasir, T., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4575-4595 21 p.

Research output: Contribution to journalArticle

Wear of materials
Composite materials
Metals
Tapping (furnace)
Torque

A review study of the microstructural behavior and mechanical properties of ZrB2 ultra-high temperature ceramic

Kandarkar, P., Sathish Rao, U., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 4, p. 163-176 14 p., IJMPERDAUG201918.

Research output: Contribution to journalArticle

Oxidation resistance
Mechanical properties
Strength of materials
High temperature applications
Aerospace applications

A turbulence inducer side wall treatment for a solar collector for performance improvement

Vasudeva Karanth, K., Yagnesh Sharma, N. & Madhwesh, N., 01-01-2019, In : Procedia Manufacturing. 35, p. 1102-1110 9 p.

Research output: Contribution to journalConference article

Open Access
Solar collectors
Turbulence
Air
Brakes
Ducts

Biomass Briquettes as an Alternative Fuel: A Comprehensive Review

Dinesha, P., Kumar, S. & Rosen, M. A., 10-05-2019, In : Energy Technology. 7, 5, p. 1-8 8 p., 1801011.

Research output: Contribution to journalReview article

Alternative fuels
Briquetting
Ashes
Feedstocks
Biomass
Biodiesel
Emulsions
Ignition
Ethers
Compaction
Pongamia
Bioethanol
Biofuels
Biodiesel
Ignition
Open Access
Finite Element Analysis
Incisor
Tooth
Bone and Bones
Bicuspid

Computational fluid dynamic study on effect of Carreau-Yasuda and Newtonian blood viscosity models on hemodynamic parameters

Kumar, N., Khader, A., Pai, R., Kyriacou, P., Khan, S. & Koteshwara, P., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 465-477 13 p.

Research output: Contribution to journalArticle

Hemodynamics
Arteries
Computational Fluid Dynamics
Blood
Viscosity
Steel
Low carbon steel
Microstructure
Wear of materials
Case hardening
2 Citations (Scopus)

Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In : Materials Research Express. 6, 6, 065311.

Research output: Contribution to journalArticle

Glass fibers
Aging of materials
Bending strength
Mechanical properties
Composite materials
Cerium
Biodiesel
Nanoparticles
Engines
Oxides

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

Nanocomposites
Clay
Thermodynamic stability
Agglomeration
Coatings

Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

Kumar, S., Dinesha, P. & Sai Krishna, K. R. N., 03-04-2019, In : Journal of Turbulence. 20, 4, p. 245-262 18 p.

Research output: Contribution to journalArticle

friction factor
heat exchangers
turbulent flow
Turbulent flow
numerical analysis
Laminates
Erosion
Glass
Aluminum Oxide
Analysis of variance (ANOVA)
Bending strength
Tensile strength
Glass fibers
Composite materials
Polymers
Open Access
Stiffness
Fatigue of materials
Degradation
Glass
Composite materials
Open Access
Fuzzy logic
Stereo vision
Cost functions
Costs
Pixels
Nusselt number
Fins (heat exchange)
Heat transfer
Wire
Air
Austenite
Ferrite
Mechanical properties
Microstructure
Steel
Open Access
Carburizing
Steel
Powders
Carbonates
Carbon
3 Citations (Scopus)
Open Access
Seawater
Moisture
Glass
Composite materials
Laminates

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

Steel
Age hardening
Powders
Carbon steel
Metals
Thermal shock
Glass fibers
Microstructure
Composite materials
Bending strength
4 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

Glass fibers
Polymers
Bending strength
Tensile strength
Composite materials

Mechanical and machinability study on discontinuously reinforced sisal fibre polyester composite laminates

Shetty, R., Barboza, A. B. V. & Nayak, R., 18-09-2019, In : Materials Research Express. 6, 10, 105370.

Research output: Contribution to journalArticle

Polyesters
Machinability
Laminates
Fibers
Composite materials

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Martensite
Ferrite
Steel
Toughness
Hardness

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

Nodular iron
Manganese
Hardness
Heat treatment
Tensile strength

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Composite materials
Reinforcement
Impact resistance
Tensile strength
Aging of materials

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Steel
Heat treatment
Mechanical properties
Machinability
Carbon steel

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
Polyesters
Mechanical testing
Glass fibers
Laminates
Bending strength
tannase
response surface methodology
genetic algorithm
artificial neural network
neural networks

Natural articular cartilage: A smart biointerface

Pawlak, Z., Pai, R., Mrela, A., Kaczmarek, M., Yusuf, K. Q. & Urbaniak, W., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 479-489 11 p.

Research output: Contribution to journalArticle

Cartilage
Phospholipids
Surface testing
Friction
Solid lubricants
Numerical analysis
Air
Flow rate
Computational fluid dynamics
Reynolds number

Numerical investigation of heat transfer through a square heat exchanger with a twisted tape as a heat augmentation device

Nanda, R., Narayanan, A. & Kumar, S., 03-09-2019, 1st International Conference on Advances in Mechanical Engineering and Nanotechnology, ICAMEN 2019. Dikshit, M. K., Pathak, V. K. & Srivastava, A. K. (eds.). American Institute of Physics Inc., 030034. (AIP Conference Proceedings; vol. 2148).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
heat exchangers
heat transfer
tapes
heat
augmentation
2 Citations (Scopus)

Performance and emission analysis of a domestic wick stove using biofuel feedstock derived from waste cooking oil and sesame oil

Dinesha, P., Kumar, S. & Rosen, M. A., 01-06-2019, In : Renewable Energy. 136, p. 342-351 10 p.

Research output: Contribution to journalArticle

Stoves
Cooking
Kerosene
Biofuels
Feedstocks
1 Citation (Scopus)

Physical and tribo-mechanical properties of waste rubber tyre/epoxy composites

Shivamurthy, B., Doreswamy, D., Nishanth, J. & Shiva Prasad, H. C., 17-07-2019, In : Materials Research Express. 6, 9, 095321.

Research output: Contribution to journalArticle

Tires
Fillers
Mechanical properties
Composite materials
Wear of materials

Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCIp composites

Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

Research output: Contribution to journalArticle

Age hardening
Cast iron
Aging of materials
Hardness
Composite materials

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

Polyesters
Delamination
Glass fibers
Drilling
Composite materials

Productivity and efficiency of cashew processing: Comparison of manual and automated systems

Pai, R., Upadhyaya, P. & Upadhyaya, Y. S., 01-06-2019, In : Prabandhan: Indian Journal of Management. 12, 6, p. 20-30 11 p.

Research output: Contribution to journalArticle

Productivity
Automation
Small and medium-sized enterprises
Sorting
Fatigue

Status, trends and significance of parabolic trough technology in the changing heat transportation scenario

Nakul, S. & Arunachala, U. C., 15-07-2019, In : Solar Energy. p. 57-81 25 p.

Research output: Contribution to journalReview article

Laminar flow
Heat flux
Agglomeration
Heat transfer
Geometry

Steady and transient flow CFD simulations in an aorta model of normal and aortic aneurysm subjects

Vinoth, R., Kumar, D., Adhikari, R., Vijayapradeep, S., Geetha, K., Ilavarasi, R. & Mahalingam, S., 01-01-2019, Proceedings of the International Conference on Sensing and Imaging. Quinto, E. T., Ida, N., Louis, A. K. & Jiang, M. (eds.). Springer Verlag, p. 29-43 15 p. (Lecture Notes in Electrical Engineering; vol. 506).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Computational fluid dynamics
Computer simulation
Flow simulation
Hemodynamics
Velocity distribution

Study on abrasive water jet drilling for graphite filled glass/epoxy laminates

Deepak, D. & Ashwin Pai, K., 01-01-2019, In : Journal of Mechanical Engineering and Sciences. 13, 2, p. 5126-5136 11 p.

Research output: Contribution to journalArticle

Jet drilling
Abrasives
Laminates
Graphite
Glass

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

Tensile strength
Age hardening
Aging of materials
Dispersion hardening
Cold working
1 Citation (Scopus)

Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In : Materials Research Express. 6, 8, 085333.

Research output: Contribution to journalArticle

Aging of materials
Mechanical properties
Water
Composite materials
Epoxy Resins
Open Access
Turbulent flow
Turbulence
Solar collectors
Conversion efficiency
Air