Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

  • India

  • Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

    576104 Manipal

    India

Research Output 1977 2019

Filter
Article
2019

A comparative study on the effect of stress in dental implant structure using finite element analysis

Patil, V., Noronha, D. J., Naik, N. & Shettar, M., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 709-717 9 p.

Research output: Contribution to journalArticle

Dental prostheses
Finite element method
Stress concentration
Bone
Chromium Alloys
2 Citations (Scopus)
Glass fibers
Drilling
Machining
Polymers
Composite materials

Analysis of drag and lift forces in different tailed ground effect vehicles

Hiremath, P., Shettar, M., Suhas Kowshik, C. S., Rajath, J. & Sukhesh, P. D., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1399-1412 14 p.

Research output: Contribution to journalArticle

Air cushion vehicles
Drag
Inlet flow
Boundary conditions

Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing

Hariharan, G. & Pai, R., 12-08-2019, In : Industrial Lubrication and Tribology. 71, 6, p. 803-809 7 p.

Research output: Contribution to journalArticle

Bearings (structural)
Bearing pads
Fluids
Hydrodynamics
Reynolds equation

An investigation into tapping of Al6061/SiC metal matrix composite with straight flute HSS machine tap

Nagaraja, Adhikari, R. & Yasir, T., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4575-4595 21 p.

Research output: Contribution to journalArticle

Wear of materials
Composite materials
Metals
Tapping (furnace)
Torque

A review study of the microstructural behavior and mechanical properties of ZrB2 ultra-high temperature ceramic

Kandarkar, P., Sathish Rao, U., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 4, p. 163-176 14 p., IJMPERDAUG201918.

Research output: Contribution to journalArticle

Oxidation resistance
Mechanical properties
Strength of materials
High temperature applications
Aerospace applications
Biodiesel
Emulsions
Ignition
Ethers
Compaction
Pongamia
Bioethanol
Biofuels
Biodiesel
Ignition
Open Access
Finite Element Analysis
Incisor
Tooth
Bone and Bones
Bicuspid

Computational fluid dynamic study on effect of Carreau-Yasuda and Newtonian blood viscosity models on hemodynamic parameters

Kumar, N., Khader, A., Pai, R., Kyriacou, P., Khan, S. & Koteshwara, P., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 465-477 13 p.

Research output: Contribution to journalArticle

Hemodynamics
Arteries
Computational Fluid Dynamics
Blood
Viscosity
Steel
Low carbon steel
Microstructure
Wear of materials
Case hardening
2 Citations (Scopus)

Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In : Materials Research Express. 6, 6, 065311.

Research output: Contribution to journalArticle

Glass fibers
Aging of materials
Bending strength
Mechanical properties
Composite materials
Cerium
Biodiesel
Nanoparticles
Engines
Oxides

Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

Kumar, S., Dinesha, P. & Sai Krishna, K. R. N., 03-04-2019, In : Journal of Turbulence. 20, 4, p. 245-262 18 p.

Research output: Contribution to journalArticle

friction factor
heat exchangers
turbulent flow
Turbulent flow
numerical analysis
Laminates
Erosion
Glass
Aluminum Oxide
Analysis of variance (ANOVA)
Bending strength
Tensile strength
Glass fibers
Composite materials
Polymers
Open Access
Stiffness
Fatigue of materials
Degradation
Glass
Composite materials
Open Access
Fuzzy logic
Stereo vision
Cost functions
Costs
Pixels
Nusselt number
Fins (heat exchange)
Heat transfer
Wire
Air
Austenite
Ferrite
Mechanical properties
Microstructure
Steel
Open Access
Carburizing
Steel
Powders
Carbonates
Carbon
3 Citations (Scopus)
Open Access
Seawater
Moisture
Glass
Composite materials
Laminates

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

Steel
Age hardening
Powders
Carbon steel
Metals
Thermal shock
Glass fibers
Microstructure
Composite materials
Bending strength
4 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

Glass fibers
Polymers
Bending strength
Tensile strength
Composite materials

Mechanical and machinability study on discontinuously reinforced sisal fibre polyester composite laminates

Shetty, R., Barboza, A. B. V. & Nayak, R., 18-09-2019, In : Materials Research Express. 6, 10, 105370.

Research output: Contribution to journalArticle

Polyesters
Machinability
Laminates
Fibers
Composite materials

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Martensite
Ferrite
Steel
Toughness
Hardness

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

Nodular iron
Manganese
Hardness
Heat treatment
Tensile strength

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Composite materials
Reinforcement
Impact resistance
Tensile strength
Aging of materials

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Steel
Heat treatment
Mechanical properties
Machinability
Carbon steel

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
Polyesters
Mechanical testing
Glass fibers
Laminates
Bending strength
tannase
response surface methodology
genetic algorithm
artificial neural network
neural networks

Natural articular cartilage: A smart biointerface

Pawlak, Z., Pai, R., Mrela, A., Kaczmarek, M., Yusuf, K. Q. & Urbaniak, W., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 479-489 11 p.

Research output: Contribution to journalArticle

Cartilage
Phospholipids
Surface testing
Friction
Solid lubricants
Numerical analysis
Air
Flow rate
Computational fluid dynamics
Reynolds number
2 Citations (Scopus)

Performance and emission analysis of a domestic wick stove using biofuel feedstock derived from waste cooking oil and sesame oil

Dinesha, P., Kumar, S. & Rosen, M. A., 01-06-2019, In : Renewable Energy. 136, p. 342-351 10 p.

Research output: Contribution to journalArticle

Stoves
Cooking
Kerosene
Biofuels
Feedstocks
1 Citation (Scopus)

Physical and tribo-mechanical properties of waste rubber tyre/epoxy composites

Shivamurthy, B., Doreswamy, D., Nishanth, J. & Shiva Prasad, H. C., 17-07-2019, In : Materials Research Express. 6, 9, 095321.

Research output: Contribution to journalArticle

Tires
Fillers
Mechanical properties
Composite materials
Wear of materials

Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCIp composites

Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

Research output: Contribution to journalArticle

Age hardening
Cast iron
Aging of materials
Hardness
Composite materials

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

Polyesters
Delamination
Glass fibers
Drilling
Composite materials

Productivity and efficiency of cashew processing: Comparison of manual and automated systems

Pai, R., Upadhyaya, P. & Upadhyaya, Y. S., 01-06-2019, In : Prabandhan: Indian Journal of Management. 12, 6, p. 20-30 11 p.

Research output: Contribution to journalArticle

Productivity
Automation
Small and medium-sized enterprises
Sorting
Fatigue

Study on abrasive water jet drilling for graphite filled glass/epoxy laminates

Deepak, D. & Ashwin Pai, K., 01-01-2019, In : Journal of Mechanical Engineering and Sciences. 13, 2, p. 5126-5136 11 p.

Research output: Contribution to journalArticle

Jet drilling
Abrasives
Laminates
Graphite
Glass

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

Tensile strength
Age hardening
Aging of materials
Dispersion hardening
Cold working
1 Citation (Scopus)

Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In : Materials Research Express. 6, 8, 085333.

Research output: Contribution to journalArticle

Aging of materials
Mechanical properties
Water
Composite materials
Epoxy Resins

Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

Research output: Contribution to journalArticle

Cast iron
Reinforcement
Wear of materials
Composite materials
Wear resistance

WED-machining characteristics of Ti6Al4V alloy based on central composite design

Manjaiah, M., Deenashree, K. N. & Basavarajappa, S., 01-01-2019, In : International Journal of Materials and Product Technology. 59, 2, p. 121-139 19 p.

Research output: Contribution to journalArticle

Electric discharge machining
Machining
Wire
Composite materials
Electrodes
2018

Analysis of factors influencing dry sliding wear behaviour of laser remelted plasma sprayed mo coating using response surface methodology

Manjunatha, S. S., Manjaiah, M. & Basavarajappa, S., 01-01-2018, In : Archives of Metallurgy and Materials. 63, 1, p. 217-225 9 p.

Research output: Contribution to journalArticle

Sprayed coatings
Wear of materials
Plasmas
Lasers
Coatings

Analytical modelling of spiral cantilever structure for vibration energy harvesting applications

Augustine, N., Kotturu, H., Sundaram, S. M. & Vijay, G. S., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 2, p. 39-42 4 p.

Research output: Contribution to journalArticle

Energy harvesting
Vibration
Vibrations (mechanical)
Harvesters
Natural frequencies

Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

Research output: Contribution to journalArticle

Iron analysis
Nodular iron
Analysis of variance (ANOVA)
Hardness
Nickel
Thermal Conductivity
Chills
Borosilicate glass
thermal conductivity
composite materials

A numerical investigation of anatomic anterior cruciate ligament reconstruction

Bhat, B. K., Adhikari, R. & Acharya, K. K. V., 01-01-2018, In : Open Bioinformatics Journal. 11, 1, p. 259-274 16 p.

Research output: Contribution to journalArticle

Open Access
Anterior Cruciate Ligament Reconstruction
Ligaments
Anterior Cruciate Ligament
Knee Joint
Foot
4 Citations (Scopus)
Glass fibers
Moisture
Bending strength
Mechanical properties
Tensile strength