Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

  • India

  • Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

    576104 Manipal

    India

Research Output

2020

A Critical Review on the Application of Computational Fluid Dynamics in Centrifugal Turbomachines

Nilugal, M. L., Karanth, K. V. & Madhwesh, N., 06-03-2020, In : Journal of Physics: Conference Series. 1473, 1, 012012.

Research output: Contribution to journalConference article

Open Access

COVID 19: Impact of lock-down on mental health and tips to overcome

Hiremath, P., Suhas Kowshik, C. S., Manjunath, M. & Shettar, M., 06-2020, In : Asian Journal of Psychiatry. 51, 102088.

Research output: Contribution to journalArticle

Open Access

Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

Research output: Contribution to journalArticle

Effect of hemispherical turbulators in a double-pipe heat exchanger for heat transfer augmentation

Kumar, S., Dinesha, P., Narayanan, A. & Nanda, R., 03-03-2020, In : Journal of Turbulence. 21, 3, p. 166-185 20 p.

Research output: Contribution to journalArticle

Experimental analysis of mechanical properties of the unconventional sand-plastic bricks using statistical method

Bhat, R., Raghavendra Kamath, C., Mohan, N., Naik, N., Mulimani, P. & Fei, K. M., 01-01-2020, In : Journal of Engineering Science and Technology Review. 13, 2, p. 13-16 4 p.

Research output: Contribution to journalArticle

Open Access

Experimental investigations on a cross flow solar air heater having perforated circular absorber plate for thermal performance augmentation

Shetty, S. P., Paineni, A., Kande, M., Madhwesh, N., Yagnesh Sharma, N. & Vasudeva Karanth, K., 02-2020, In : Solar Energy. 197, p. 254-265 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Experimental validity on the casting characteristics of stir cast aluminium composites

Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
Open Access

Influence of Different Desiccants, Flow Type and Packings on the Liquid Desiccant Dehumidification System: A Review

Salins, S. S., Kumar, S. & Kota Reddy, S. V., 01-01-2020, (Accepted/In press) In : International Journal of Air-Conditioning and Refrigeration. 2030002.

Research output: Contribution to journalReview article

Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Open Access

Influence of stepped cylindrical turbulence generators on the thermal enhancement factor of a flat plate solar air heater

Antony, A. L., Shetty, S. P., Madhwesh, N., Yagnesh Sharma, N. & Vasudeva Karanth, K., 01-03-2020, In : Solar Energy. 198, p. 295-310 16 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
1 Citation (Scopus)

Mechanical characterization of dual phase and austempered aisi 1040 normalized steel

Gurumurthy, B. M., Shivaprakash, Y. M., Sharma, S., Achutha Kini, U. & Mathur, R., 01-01-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 247-258 12 p., IJMPERDAPR202022.

Research output: Contribution to journalArticle

NOx reduction behaviour in copper zeolite catalysts for ammonia SCR systems: A review

Mohan, S., Dinesha, P. & Kumar, S., 01-03-2020, In : Chemical Engineering Journal. 123253.

Research output: Contribution to journalReview article

4 Citations (Scopus)

Optimization and microstructure analysis of Corten steel joint in mag welding by post heat treatment

Vairamani, V., Mohan, N., Venkatesh, Karthikeyan, S. K. & Sakthivel, M., 01-01-2020, In : Materials Today: Proceedings. 21, p. 673-680 8 p.

Research output: Contribution to journalConference article

Open Access

Study of cycle time reduction and assembly process improvement for various electric stackers

Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

Research output: Contribution to journalArticle

Study on progressive wear of machine reamer while reaming Al6061/SIC composite

Nambiar, S., Adhikari, R., Upadhya, N. & Hande, R., 01-2020, In : Pertanika Journal of Science and Technology. 28, 1, p. 403-420 18 p.

Research output: Contribution to journalArticle

Surface topographical studies of glass fiber reinforced epoxy-ZnO nanocomposites

Thipperudrappa, S., Kini, A. U., Hiremath, A. & Kumar, K. D., 01-01-2020, In : Materials Research Express. 7, 1, 015304.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Thermal management of photovoltaic module with metal matrix embedded PCM

Shastry, D. M. C. & Arunachala, U. C., 04-2020, In : Journal of Energy Storage. 28, 101312.

Research output: Contribution to journalArticle

Trade-off between wire matrix and twisted tape: SOLTRACE® based indoor study of parabolic trough collector

Varun, K., Arunachala, U. C. & Elton, D. N., 08-2020, In : Renewable Energy. 156, p. 478-492 15 p.

Research output: Contribution to journalArticle

2019

A comparative study on the effect of stress in dental implant structure using finite element analysis

Patil, V., Noronha, D. J., Naik, N. & Shettar, M., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 709-717 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
3 Citations (Scopus)
Open Access

Analysis of drag and lift forces in different tailed ground effect vehicles

Hiremath, P., Shettar, M., Suhas Kowshik, C. S., Rajath, J. & Sukhesh, P. D., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1399-1412 14 p.

Research output: Contribution to journalArticle

Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing

Hariharan, G. & Pai, R., 12-08-2019, In : Industrial Lubrication and Tribology. 71, 6, p. 803-809 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

An innovative surface morphology for a solar air heater to augment its performance

Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-01-2019, In : Procedia Manufacturing. 35, p. 1087-1095 9 p.

Research output: Contribution to journalConference article

Open Access

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

An investigation into tapping of Al6061/SiC metal matrix composite with straight flute HSS machine tap

Nagaraja, Adhikari, R. & Yasir, T., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4575-4595 21 p.

Research output: Contribution to journalArticle

A review on metallic dental materials and its fabrication techniques

Gupta, T., Shetty, S., Shetty, N. & Divakara Shetty, S., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 491-510 20 p., IJMPERDOCT201943.

Research output: Contribution to journalArticle

A review study of the microstructural behavior and mechanical properties of ZrB2 ultra-high temperature ceramic

Kandarkar, P., Sathish Rao, U., Gowrishankar, M. C. & Shettar, M., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 4, p. 163-176 14 p., IJMPERDAUG201918.

Research output: Contribution to journalArticle

A turbulence inducer side wall treatment for a solar collector for performance improvement

Vasudeva Karanth, K., Yagnesh Sharma, N. & Madhwesh, N., 01-01-2019, In : Procedia Manufacturing. 35, p. 1102-1110 9 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Biomass Briquettes as an Alternative Fuel: A Comprehensive Review

Dinesha, P., Kumar, S. & Rosen, M. A., 10-05-2019, In : Energy Technology. 7, 5, p. 1-8 8 p., 1801011.

Research output: Contribution to journalReview article

2 Citations (Scopus)
7 Citations (Scopus)
Open Access

Computational fluid dynamic study on effect of Carreau-Yasuda and Newtonian blood viscosity models on hemodynamic parameters

Kumar, N., Khader, A., Pai, R., Kyriacou, P., Khan, S. & Koteshwara, P., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 465-477 13 p.

Research output: Contribution to journalArticle

Disparity Maps Based Path Planning Algorithm for Autonomous Robot Navigation

Shetty, A. A., George, V. I., Nayak, C. G. & Shetty, R., 06-2019, Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019. Institute of Electrical and Electronics Engineers Inc., p. 669-675 7 p. 8821808. (Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Drilling and structural property study of multi-layered fiber and fabric reinforced polymer composite - a review

Rao, Y. S., Mohan, N. S., Shetty, N. & Shivamurthy, B., 01-01-2019, (Accepted/In press) In : Materials and Manufacturing Processes.

Research output: Contribution to journalReview article

Open Access
5 Citations (Scopus)
6 Citations (Scopus)