Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

  • India

  • Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal

    576104 Manipal

    India

Research Output

Filter
Conference contribution
2019

Disparity Maps Based Path Planning Algorithm for Autonomous Robot Navigation

Shetty, A. A., George, V. I., Nayak, C. G. & Shetty, R., 06-2019, Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019. Institute of Electrical and Electronics Engineers Inc., p. 669-675 7 p. 8821808. (Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical investigation of heat transfer through a square heat exchanger with a twisted tape as a heat augmentation device

Nanda, R., Narayanan, A. & Kumar, S., 03-09-2019, 1st International Conference on Advances in Mechanical Engineering and Nanotechnology, ICAMEN 2019. Dikshit, M. K., Pathak, V. K. & Srivastava, A. K. (eds.). American Institute of Physics Inc., 030034. (AIP Conference Proceedings; vol. 2148).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Numerical study of solar thermal combi system to enhance the passive cooling of PV module

Raj, A., Arunachala, U. C., Bhagat, K. K., Kalani, N. & Yadav, P., 02-10-2019, Renewable Energy Sources and Technologies. Nallusamy, N., Suresh, M., Rajkumar, S., Harikrishna, K. L. & Somasundaram, S. (eds.). American Institute of Physics Inc., 020053. (AIP Conference Proceedings; vol. 2161).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Steady and transient flow CFD simulations in an aorta model of normal and aortic aneurysm subjects

Vinoth, R., Kumar, D., Adhikari, R., Vijayapradeep, S., Geetha, K., Ilavarasi, R. & Mahalingam, S., 01-01-2019, Proceedings of the International Conference on Sensing and Imaging. Quinto, E. T., Ida, N., Louis, A. K. & Jiang, M. (eds.). Springer Verlag, p. 29-43 15 p. (Lecture Notes in Electrical Engineering; vol. 506).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Thermal management of conventional P v module

Shetty, DI. & Arunachala, U. C., 14-05-2019, 2019 Advances in Science and Engineering Technology International Conferences, ASET 2019. Institute of Electrical and Electronics Engineers Inc., 8714271. (2019 Advances in Science and Engineering Technology International Conferences, ASET 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

A study on chicken feather filled hybrid glass fiber - Polymer composite

Suhas Kowshik, C. S., Hiremath, P., Shettar, M. & Naik, N., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 151-154 4 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SICp composites

Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental evaluation of the chill casting method for the fabrication of LM-25 aluminum alloy-borosilicate glass (p) composites

Hiremath, A. & Hemanth, J., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 69-73 5 p. (Key Engineering Materials; vol. 748 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

FRP-Nanoclay hybrid composites: A review

Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Metallography & bulk hardness of artificially aged Al6061-B4C-SiC stir cast hybrid composites

Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Performance comparison of phase change materials for thermal energy storage

Korody, J. & Dinesha, P., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 231-236 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2016

Study on effect of thermo-structural loading on the PCB during Selective Soldering process using finite element method

Bhat, S. K., Deshpande, R., Beck, P., Hegde, S., Upadhyaya, Y. S. & Ghosh, C. K., 07-06-2016, 2016 International Conference on Electronics Packaging, ICEP 2016. Institute of Electrical and Electronics Engineers Inc., p. 542-547 6 p. 7486886

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2014

Experimental analysis of cardanol biofuel as an alternative fuel for diesel engines with air-side oxygen enrichment

Dinesha, P., Nayak, V., Kumar, D. & Mohanan, P., 01-01-2014, Dynamics of Machines and Mechanisms, Industrial Research. Trans Tech Publications Ltd, p. 1549-1553 5 p. (Applied Mechanics and Materials; vol. 592-594).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Machining of D2 heat treated steel using Abrasive Water Jet: The effect of standoff distance and feed rate on kerf width and surface roughness

Doreswamy, D., Valavala, A., Winitthumkul, N. & Devineni, A., 01-01-2014, BHR Group - 22nd International Conference on Water Jetting 2014. BHR Group Limited, p. 167-174 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Selection of mother wavelet for effective wavelet transform of bearing vibration signals

Kumar, H. S., Pai, S. P., Sriram, N. S. & Vijay, G. S., 01-01-2014, Advanced Manufacturing and Automation. Trans Tech Publications Ltd, p. 169-176 8 p. (Advanced Materials Research; vol. 1039).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)
2013

Analytical and experimental investigation to determine the variation of H-W-B constants for a scaled forced circulation flat plate solar water heater

Chandavar, A., Bhatt, S. & Krishnamurthy, S., 01-01-2013, Energy. American Society of Mechanical Engineers(ASME), Vol. 6 B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study of the influence of normal and high blood pressure on normal and stenosed carotid bifurcation using fluid-structure interaction

Abdul Khader, S. M. A., Ayachit, A., Pai, R., Zubair & Ahmed, K. A., 2013, Mechanical and Manufacturing Engineering. Vol. 315. p. 982-986 5 p. (Applied Mechanics and Materials; vol. 315).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Three dimensional CFD simulation of thermosyphon flow in an unglazed solar flat plate collector

Sharma, Y. N., Shivamallaiah, M. M. & Karanth, V. K., 01-01-2013, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers(ASME), Vol. 7 B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Experimental investigation of the effect of process parameters on machining of GFRP composites using Abrasive Water Suspension Jet submerged in water

Deepak, D. & Devineni, A., 01-12-2012, BHR Group - 21st International Conference on Water Jetting: Looking to the Future, Learning from the Past. p. 25-33 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2011

A computational conjugate thermal analysis of HP stage turbine blade cooling with innovative cooling passage geometries

Kini, C. R., Satish, S. B. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. p. 2168-2173 6 p. (Proceedings of the World Congress on Engineering 2011, WCE 2011; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Bullwhip effect mitigation in trading system: A system dynamics approach

Rodrigues, L. L. R., Hebbar, S. & Herle, R., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. Vol. 1. p. 587-592 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Comparison of flow in normal and stenosed carotid bulb

Khader, S. M. A., Pai, B. R., Ayachit, A., Rao, V. R. K. & Kamath, S. G., 29-09-2011, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. p. 245-248 4 p. 6014889

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of hypotension in stenosed common carotid artery A FSI study

Pai, B. R., Khader, S. M. A., Ayachit, A., Rao, V. R. K. & Kamath, S. G., 29-09-2011, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. p. 269-272 4 p. 6014894

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impeller treatment for a centrifugal fan using splitter vanes - A CFD approach

Madhwesh, N., Karanth, K. V. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. Vol. 3. p. 1981-1986 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Numerical analysis of flow through abrasive water suspension jet: The effect of inlet pressure on wall shear and jet exit kinetic energy

Deepak, D., Anjaiah, D. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. Vol. 3. p. 2004-2008 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Numerical simulation of a solar flat plate collector using Discrete Transfer Radiation Model (DTRM) - A CFD approach

Karanth, K. V., Manjunath, M. S. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. Vol. 3. p. 2355-2360 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

Three dimensional numerical analysis of conjugate heat transfer for enhancement of thermal performance using finned tubes in an economical unglazed solar flat plate collector

Manjunath, M. S., Vasudeva Karanth, K. & Yagnesh Sharma, N., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. Vol. 3. p. 2245-2249 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)
2010

Affect of production cycle time in manufacturing supply chain management: A system dynamics approach

Rodrigues, L. L. R., Pate, R., Gopalakrishna, B., Shetty, P. K. & Srinivasa Rao, B. R., 30-07-2010, 5th IEEE International Conference on Management of Innovation and Technology, ICMIT2010. p. 146-150 5 p. 5492857

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Corrosion inhibition of 15 vol. % 6061 Al alloy/SiCp composite in 1 M hydrochloric acid medium

Shetty, S. D., Kini, U. A. & Shetty, P., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 64-67 4 p. 5598494

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cyclic combustion studies of a CI engine operating on jatropha B20 fuel

Barboza, A. B. V., Yagnesh Sharma, N. & Sudhir, C. V., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 43-46 4 p. 5598487. (ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Influence of process parameters on the quality of hole in drilling of GFRP composites - An experimental investigation using DOE

Murthy, B. R. N., Raj Rodrigues, L. L., Yagnesh Sharma, N. & Anjaiah, D., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 87-90 4 p. 5598497. (ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Numerical analysis of a centrifugal fan for performance enhancement using boundary layer fences on the volute casing

Karanth, K. V. & Sharma, N. Y., 30-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 38-42 5 p. 5598488

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Stability charateristics of a tri-taper journal bearing: A linearized perturbation approach

Pai, R. S., Rao, D. S., Shenoy, B. S. & Pai, R. S., 2010, 1st International Brazilian Conference on Tribology, TriboBR-2010 and ITS - IFToMM 2010 - 2nd International Tribology Symposium of IFToMM. p. 336-349 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The effect of fuel volatility on droplet depletion rate and penetration of vaporizing fuel droplets in a gas turbine combustor

Sharma, N. Y., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 82-86 5 p. 5598498

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Total productive maintenance of a diesel power generating unit of a institution campus

Shetty, P. K. & Rodrigues, L. L. R., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 68-71 4 p. 5598493

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)
2008

Managing the learning dynamics within the projects based organization- A novel approach through modelling and simulation

Rodrigues, L. L. R., Gopalkrishna, B., Dharmaraj, N. & Shrinivasa Rao, B. R., 01-09-2008, Proceedings - 2nd Asia International Conference on Modelling and Simulation, AMS 2008. p. 765-770 6 p. 4530572

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

A pressured steam JET approach to tool wear minimization in cutting of metal matrix composites

Anjaiah, D., Shetty, R., Pai, R., Kini, M. V. & Rao, S. S., 01-12-2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 1 ed. p. 643-646 4 p. (Materials Science Forum; vol. 561-565, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2005

Cybernetics of engineering competence-pool development & deployment: Simulation based implications

Rodrigues, L. L. R. & Martis, M. S., 01-01-2005, 3rd International Conference on Education and Information Systems: Technologies and Applications, EISTA 2005, Proceedings. International Institute of Informatics and Systemics, IIIS, Vol. 1. p. 138-143 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution