Manipal Academy of Higher Education, Manipal

  • India

Research Output

Filter
Conference article
2020

A Critical Review on the Application of Computational Fluid Dynamics in Centrifugal Turbomachines

Nilugal, M. L., Karanth, K. V. & Madhwesh, N., 06-03-2020, In : Journal of Physics: Conference Series. 1473, 1, 012012.

Research output: Contribution to journalConference article

Open Access

Comparative Analysis of 5 level, 7 level and 9 level Half-Bridge Modular Multilevel Converter

Jatin, Agarwal, A. & Jadoun, V. K., 13-05-2020, In : Journal of Physics: Conference Series. 1478, 1, 012012.

Research output: Contribution to journalConference article

Open Access
Open Access

Grouping of Distributed Data at Multiple Sites by Sustaining the Privacy of Data

Sumana, M. & Hareesha, K. S., 01-01-2020, In : Procedia Computer Science. 171, p. 1688-1697 10 p.

Research output: Contribution to journalConference article

Open Access

Image Captioning and Comparison of Different Encoders

Pal, A., Kar, S., Taneja, A. & Jadoun, V. K., 13-05-2020, In : Journal of Physics: Conference Series. 1478, 1, 012004.

Research output: Contribution to journalConference article

Open Access

Investigating the effect of chitosan's degree of deacetylation on size of the nanoparticle

Rodrigues, F. C., Devi, N. G., Koteshwara, K. B. & Thakur, G., 26-06-2020, In : IOP Conference Series: Materials Science and Engineering. 872, 1, 012109.

Research output: Contribution to journalConference article

Open Access

Optimization and microstructure analysis of Corten steel joint in mag welding by post heat treatment

Vairamani, V., Mohan, N., Venkatesh, Karthikeyan, S. K. & Sakthivel, M., 01-01-2020, In : Materials Today: Proceedings. 21, p. 673-680 8 p.

Research output: Contribution to journalConference article

Open Access
Open Access

Optimization based feasibility study for filler slabs as a response towards the ECBC roof compliance with respect to thermal transmittance for five climatic zones of India

Acharya, R. R., Kishore, P., Raghuprem, M., Kini, P., Shetty, S. & Raj, A., 2020, In : Procedia Manufacturing. 44, p. 213-220 8 p.

Research output: Contribution to journalConference article

Open Access
2019

A Compact Planar Wideband Monopole Antenna with dipole like radiation characteristics for Wireless Applications

Perli, P., Rushi, V., Shankar, S., Kumar, O. P., Mohammad Saadh, A. W. & Ali, T., 12-11-2019, In : IOP Conference Series: Materials Science and Engineering. 561, 1, 012102.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

An innovative surface morphology for a solar air heater to augment its performance

Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-01-2019, In : Procedia Manufacturing. 35, p. 1087-1095 9 p.

Research output: Contribution to journalConference article

Open Access

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

A turbulence inducer side wall treatment for a solar collector for performance improvement

Vasudeva Karanth, K., Yagnesh Sharma, N. & Madhwesh, N., 01-01-2019, In : Procedia Manufacturing. 35, p. 1102-1110 9 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Comprehensive review of parameters influencing the performance of magnetorheological elastomers embedded in beams

Barman, H. & Hegde, S., 2019, In : Materials Today: Proceedings. 26, p. 2130-2135 6 p.

Research output: Contribution to journalConference article

Design and antimicrobial activity of piperazine polymer nanocomposite

Jalageri, M. D., Puttaiahgowda, Y. M. & Hariprasad, 2019, In : Materials Today: Proceedings. 15, p. 262-267 6 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Effect of microwave irradiation power for the morphological changes of ZnO nanoparticles

Pavithra, K. S., Fasiulla, Yashoda, M. P. & Prasannakumar, S., 09-12-2019, In : IOP Conference Series: Materials Science and Engineering. 577, 1, 012120.

Research output: Contribution to journalConference article

Open Access

Enhancing the mechanical properties of jute fiber reinforced green composites varying cashew nut shell liquid composition and using mercerizing process

Naik, N., Shivamurthy, B., Thimappa, B. H. S., Govil, A., Gupta, P. & Patra, R., 01-01-2019, In : Materials Today: Proceedings. 19, p. 434-439 6 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)
5 Citations (Scopus)
4 Citations (Scopus)

Heat treatment and mechanical characterization of LM-25/tungsten carbide metal matrix composites

Hegde, N. T., Pai, D. & Hegde, R., 01-01-2019, In : Materials Today: Proceedings. 19, p. 810-817 8 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Implementation of lean techniques for sustainable workflow process in Indian motor manufacturing unit

Mahajan, M., Chistopher, K. B., Harshan & Shiva Prasad, H. C., 01-01-2019, In : Procedia Manufacturing. 35, p. 1196-1204 9 p.

Research output: Contribution to journalConference article

Open Access
2 Citations (Scopus)

Metal oxide thin film for chemiresistive biosensing applications

Anchan, B., Hegde, S., De, S. & Patil, A., 2019, In : Materials Today: Proceedings. 27, p. 440-442 3 p.

Research output: Contribution to journalConference article

MIT manipal at ImageCLef 2019 visual question answering in medical domain

Thanki, A. & Makkithaya, K., 01-01-2019, In : CEUR Workshop Proceedings. 2380

Research output: Contribution to journalConference article

Multi-response optimization of process parameters in AWJ machining of hybrid GFRP composite by grey relational method

Deepak, D. & Paulo Davim, J., 01-01-2019, In : Procedia Manufacturing. 35, p. 1211-1221 11 p.

Research output: Contribution to journalConference article

Open Access
2 Citations (Scopus)

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)

New Reverse converters for the four-moduli set {2 n ,2 n -1,2 n +1,2 n-1 -1} for n even

Phalguna, P. S., Kamat, D. V. & Mohan, P. V. A., 01-01-2019, In : Midwest Symposium on Circuits and Systems. 2019-January, p. 416-419 4 p., 8623892.

Research output: Contribution to journalConference article

Nitk Kids' speech corpus

Ramteke, P. B., Supanekar, S., Hegde, P., Nelson, H., Aithal, V. & Koolagudi, S. G., 01-01-2019, In : Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH. 2019-September, p. 331-335 5 p.

Research output: Contribution to journalConference article

Performance Analysis of Antennas in Structural Health Monitoring

Kumar, P., 12-11-2019, In : IOP Conference Series: Materials Science and Engineering. 561, 1, 012115.

Research output: Contribution to journalConference article

Open Access

PRBS based model identification and GPC PID control design for MIMO Process

Yadav, E. S. & Indiran, T., 01-01-2019, In : Materials Today: Proceedings. 17, p. 16-25 10 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In : Materials Today: Proceedings. 19, p. 658-662 5 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Simulation and Comparative performance analysis of Modified Cyclone Dust Separator

Bhade, S. & Hegde, S., 09-12-2019, In : IOP Conference Series: Materials Science and Engineering. 577, 1, 012026.

Research output: Contribution to journalConference article

Open Access

Synthesis of environmental-friendly polymer nanocomposite against pathogenic microorganism

Akshatha, N. & Yashoda, M. P., 01-01-2019, In : Materials Today: Proceedings. 15, p. 273-276 4 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Transport of curcumin from cross-linked chitosan matrices: A comparative study

Nayak, R., Philip, J., Rodrigues, F. C. & Thakur, G., 12-11-2019, In : IOP Conference Series: Materials Science and Engineering. 561, 1, 012029.

Research output: Contribution to journalConference article

Open Access
2018

Adaptive User Interface for Moodle based E-learning System using Learning Styles

Kolekar, S. V., Pai, R. M. & Manohara Pai, M. M., 01-01-2018, In : Procedia Computer Science. 135, p. 606-615 10 p.

Research output: Contribution to journalConference article

10 Citations (Scopus)

A linear programming approach for land allocation of the commercial crops in a plantation

Raveena, S. & Hebbar, S., 01-01-2018, In : Proceedings of the International Conference on Industrial Engineering and Operations Management. 2018, JUL, p. 1031-1032 2 p.

Research output: Contribution to journalConference article

A practical approach in porous medium combustion for domestic application: A review

Ismail, A. K., Ibrahim, N. H., Shamsuddin, K. A., Abdullah, M. Z. & Zubair, M., 01-06-2018, In : IOP Conference Series: Materials Science and Engineering. 370, 1, 012004.

Research output: Contribution to journalConference article

3 Citations (Scopus)

A Review on Adsorption of Cationic Dyes using Activated Carbon

Corda, N. C. & Kini, M. S., 09-01-2018, In : MATEC Web of Conferences. 144, 02022.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Comparative evaluation of efficacy of Zinc oxide and Copper oxide nanoparticles as antimicrobial additives in alginate impression materials

Ginjupalli, K., Alla, R., Shaw, T., Tellapragada, C., Kumar Gupta, L. & Nagaraja Upadhya, P., 01-01-2018, In : Materials Today: Proceedings. 5, 8, p. 16258-16266 9 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Design and Analysis of Split Fixture for Gear Hobbing Machine

Shenoy, P., Nithesh, N., Shettar, M., Debarghya & Abbas, W., 09-01-2018, In : MATEC Web of Conferences. 144, 01014.

Research output: Contribution to journalConference article

Design and Simulation of a Vapour Compression Refrigeration System Using Phase Change Material

Siddharth, R., Jagannath, K., Kini Giridhar, P. & Vishnumurthy, K. K., 09-01-2018, In : MATEC Web of Conferences. 144, 04002.

Research output: Contribution to journalConference article

Design of high speed carry select adder using modified parallel prefix adder

Hebbar, A. R., Srivastava, P. & Joshi, V. K., 01-01-2018, In : Procedia Computer Science. 143, p. 317-324 8 p.

Research output: Contribution to journalConference article

4 Citations (Scopus)

Effect of bio-ethanol on the performance and emission of a biodiesel fueled compression ignition engine

Bhat, S. N., Shenoy, S. & Dinesha, P., 09-01-2018, In : MATEC Web of Conferences. 144, 04017.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Effect of Cadmium Dopant on Structure and Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique

Joishy, S., Sindhu, H. S. & Rajendra, B. V., 01-01-2018, In : IOP Conference Series: Materials Science and Engineering. 360, 1, 012050.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Evaluation of properties of Glass Ionomer Cement reinforced with Zinc Oxide nanoparticles - An in vitro study

Agarwal, P., Nayak, R., Upadhya, P. N., Ginjupalli, K. & Gupta, L., 01-01-2018, In : Materials Today: Proceedings. 5, 8, p. 16065-16072 8 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Experimental and numerical investigation of mode II failure behavior evaluation using three point bend, end notched flexure test

Nikhil, R., Shivakumar, S., Anupama, K. & Manjunath, S., 09-01-2018, In : MATEC Web of Conferences. 144, 02009.

Research output: Contribution to journalConference article

1 Citation (Scopus)
5 Citations (Scopus)

Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal

Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In : Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)