Raviraj Shetty

BE (Industrial & Production), MTech (Advanced Manufacturing Engineering), MBA (HRM), PhD (Composite Materials)

  • 199 Citations
  • 7 h-Index
20072019
If you made any changes in Pure these will be visible here soon.

Research Output 2007 2019

  • 199 Citations
  • 7 h-Index
  • 19 Article
  • 3 Conference contribution
  • 1 Conference article
2019

Disparity Maps Based Path Planning Algorithm for Autonomous Robot Navigation

Shetty, A. A., George, V. I., Nayak, C. G. & Shetty, R., 06-2019, Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019. Institute of Electrical and Electronics Engineers Inc., p. 669-675 7 p. 8821808. (Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Autonomous Navigation
Robot Navigation
Autonomous Robots
Path Planning
Motion planning
Open Access
Fuzzy logic
Stereo vision
Cost functions
Costs
Pixels

Mechanical and machinability study on discontinuously reinforced sisal fibre polyester composite laminates

Shetty, R., Barboza, A. B. V. & Nayak, R., 18-09-2019, In : Materials Research Express. 6, 10, 105370.

Research output: Contribution to journalArticle

Polyesters
Machinability
Laminates
Fibers
Composite materials
2018
Age hardening
Inert gases
Silicon carbide
Tungsten
Tensile strength

Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

Research output: Contribution to journalConference article

Inert gas welding
Tungsten
Design of experiments
Welding
Welds
1 Citation (Scopus)

Processing, mechanical charaterization and its tribological study of discontinously reinforced Caryota Urens Fibre Polyester composites

Shetty, R., Pai, R., Barboza, A. B. V. & Gandhi, V. P., 01-06-2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 12, p. 3920-3928 9 p.

Research output: Contribution to journalArticle

Polyesters
Fibers
Composite materials
Processing
Hemp

Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In : International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

Research output: Contribution to journalArticle

Age hardening
Inert gases
Tungsten
Welds
Tensile strength

Statistical and surface metallurgical study during electric discharge machining of Ti-6Al-4V

Shetty, R., Pai, R., Barboza, A. B. V. & Shetty, Y., 01-06-2018, In : ARPN Journal of Engineering and Applied Sciences. 13, 11, p. 3594-3600 7 p.

Research output: Contribution to journalArticle

Electric discharge machining
Machining
Wear of materials
Metallurgy
Electrodes
2017
1 Citation (Scopus)

Analysis of elastomer turning under different rake angles

Nayak, R. & Shetty, R., 01-05-2017, In : ARPN Journal of Engineering and Applied Sciences. 12, 9, p. 2977-2981 5 p.

Research output: Contribution to journalArticle

Elastomers
Finite element method
Metal cutting
Cost reduction
Plastics

Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SICp composites

Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Noble Gases
Tungsten
precipitation hardening
Age hardening
Inert gases
1 Citation (Scopus)

Numerical investigation of chip formation during machining of elastomers and estimation of cutting force

Nayak, R., Keni, L. & Shetty, R., 01-11-2017, In : International Review of Mechanical Engineering. 11, 11, p. 877-882 6 p.

Research output: Contribution to journalArticle

Elastomers
Machining
Cutting tools
Cryogenics
Plastics
53 Citations (Scopus)

Wear resistance enhancement of titanium alloy (Ti-6Al-4V) by ball burnishing process

Revankar, G. D., Shetty, R., Rao, S. S. & Gaitonde, V. N., 01-01-2017, In : Journal of Materials Research and Technology. 6, 1, p. 13-32 20 p.

Research output: Contribution to journalArticle

Burnishing
Titanium alloys
Wear resistance
Wear of materials
Friction
2016

Normalized cross correlation for stereo matching under varying illumination

Shetty, A. A., George, V. I., Nayak, C. G. & Shetty, R., 01-01-2016, In : International Journal of Control Theory and Applications. 9, 21, p. 39-42 4 p.

Research output: Contribution to journalArticle

Lighting
Pixels
9 Citations (Scopus)

Soft computing techniques during drilling of bi-directional carbon fiber reinforced composite

Shetty, N., Herbert, M. A., Shetty, R., Shetty, D. S. & Vijay, G. S., 01-04-2016, In : Applied Soft Computing Journal. 41, p. 466-478 13 p.

Research output: Contribution to journalArticle

Soft computing
Carbon fibers
Multilayer neural networks
Drilling
Genetic algorithms
2015
4 Citations (Scopus)

Mechanical characterization and evaluation of delamination of polymer composite laminate

Shetty, N., Shetty, D., Vijay, G. S. & Shetty, R., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 15, p. 35757-35769 13 p.

Research output: Contribution to journalArticle

Delamination
Laminates
Drilling
Composite materials
Polymers
2014
42 Citations (Scopus)

Analysis of surface roughness and hardness in ball burnishing of titanium alloy

Revankar, G. D., Shetty, R., Rao, S. S. & Gaitonde, V. N., 01-12-2014, In : Measurement: Journal of the International Measurement Confederation. 58, p. 256-268 13 p.

Research output: Contribution to journalArticle

Burnishing
Titanium Alloy
titanium alloys
Surface Roughness
Titanium alloys
22 Citations (Scopus)

Analysis of surface roughness and hardness in titanium alloy machining with polycrystalline diamond tool under different lubricating modes

Revankar, G. D., Shetty, R., Rao, S. S. & Gaitonde, V. N., 01-01-2014, In : Materials Research. 17, 4, p. 1010-1022 13 p.

Research output: Contribution to journalArticle

Diamond
titanium alloys
lubrication
Titanium alloys
machining
11 Citations (Scopus)

Selection of optimal process parameters in ball burnishing of titanium alloy

Revankar, G. D., Shetty, R., Rao, S. S. & Gaitonde, V. N., 03-07-2014, In : Machining Science and Technology. 18, 3, p. 464-483 20 p.

Research output: Contribution to journalArticle

Burnishing
Titanium alloys
Surface roughness
Hardness
Taguchi methods
2010
8 Citations (Scopus)
Machining
Surface roughness
Coolants
Hardness
Flow rate
2009
7 Citations (Scopus)
Emulsions
Steam
Aluminum
Composite materials
Analysis of variance (ANOVA)
31 Citations (Scopus)

Taguchi's technique in machining of metal matrix composites

Shetty, R., Pai, R. B., Rao, S. S. & Nayak, R., 01-01-2009, In : Journal of the Brazilian Society of Mechanical Sciences and Engineering. 31, 1, p. 12-20 9 p.

Research output: Contribution to journalArticle

Machining
Composite materials
Metals
Steam
Surface roughness
2008
7 Citations (Scopus)

Steam as coolant and lubricant in turning of metal matrix composites

Shetty, R., Pai, R., Kamath, V. & Rao, S. S., 01-09-2008, In : Journal of Zhejiang University: Science A. 9, 9, p. 1245-1250 6 p.

Research output: Contribution to journalArticle

Coolants
Lubricants
Steam
Composite materials
Metals
2007
2 Citations (Scopus)

A pressured steam JET approach to tool wear minimization in cutting of metal matrix composites

Anjaiah, D., Shetty, R., Pai, R., Kini, M. V. & Rao, S. S., 01-12-2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 1 ed. p. 643-646 4 p. (Materials Science Forum; vol. 561-565, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steam
Metals
Wear of materials
Composite materials
Cutting tools