• 108 Citations
  • 5 h-Index
20102019
If you made any changes in Pure these will be visible here soon.

Research Output 2010 2019

  • 108 Citations
  • 5 h-Index
  • 53 Article
  • 9 Conference contribution
  • 6 Conference article
  • 2 Review article
2019
2 Citations (Scopus)
Glass fibers
Drilling
Machining
Polymers
Composite materials
Steel
Low carbon steel
Microstructure
Wear of materials
Case hardening
3 Citations (Scopus)

Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In : Materials Research Express. 6, 6, 065311.

Research output: Contribution to journalArticle

Glass fibers
Aging of materials
Bending strength
Mechanical properties
Composite materials
1 Citation (Scopus)

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

Nanocomposites
Clay
Thermodynamic stability
Agglomeration
Coatings
Bending strength
Tensile strength
Glass fibers
Composite materials
Polymers
Austenite
Ferrite
Mechanical properties
Microstructure
Steel
Open Access
Carburizing
Steel
Powders
Carbonates
Carbon

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

Steel
Age hardening
Powders
Carbon steel
Metals
Thermal shock
Glass fibers
Microstructure
Composite materials
Bending strength
4 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

Glass fibers
Polymers
Bending strength
Tensile strength
Composite materials

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Martensite
Ferrite
Steel
Toughness
Hardness

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

Nodular iron
Manganese
Hardness
Heat treatment
Tensile strength

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Composite materials
Reinforcement
Impact resistance
Tensile strength
Aging of materials

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Steel
Heat treatment
Mechanical properties
Machinability
Carbon steel

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
Polyesters
Mechanical testing
Glass fibers
Laminates
Bending strength

Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCIp composites

Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

Research output: Contribution to journalArticle

Age hardening
Cast iron
Aging of materials
Hardness
Composite materials

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

Polyesters
Delamination
Glass fibers
Drilling
Composite materials

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In : International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Powders
Steel
Composite materials

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Microhardness
Wear resistance
Nanocomposites
Clay
Sonication

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

Tensile strength
Age hardening
Aging of materials
Dispersion hardening
Cold working
1 Citation (Scopus)

Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In : Materials Research Express. 6, 8, 085333.

Research output: Contribution to journalArticle

Aging of materials
Mechanical properties
Water
Composite materials
Epoxy Resins

Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

Research output: Contribution to journalArticle

Cast iron
Reinforcement
Wear of materials
Composite materials
Wear resistance
2018

Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

Research output: Contribution to journalArticle

Iron analysis
Nodular iron
Analysis of variance (ANOVA)
Hardness
Nickel
4 Citations (Scopus)
Glass fibers
Moisture
Bending strength
Mechanical properties
Tensile strength
Nodular iron
Machinability
Manganese
Hardness
Toughness
1 Citation (Scopus)

Effect of heat treatment and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

Research output: Contribution to journalArticle

Steel
Tensile strength
Hardness
Heat treatment
Wear of materials
Age hardening
Inert gases
Silicon carbide
Tungsten
Tensile strength

Effect of precipitation hardening on stir cast AL6061-B4C reinforced composite

Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

Research output: Contribution to journalArticle

Age hardening
Aging of materials
Composite materials
Tensile strength
Hardness

Effect of preheat treatment structure on mechanical characterization of AISI 4340 ferrite bainite dual phase steel

Gurumurthy, B. M., Sharma, S. S., Kini, A. & Mansoor, S. I., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 84-89 6 p.

Research output: Contribution to journalArticle

Bainite
Ferrite
Steel
Ductility
Hardness
1 Citation (Scopus)

Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B4C and Al6061-SiC Composites

Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Composite materials
Age hardening
Alloying elements
3 Citations (Scopus)

Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

Research output: Contribution to journalConference article

Bainite
Steel
Phase structure
Ferrite
Temperature
4 Citations (Scopus)

Hygrothermal Studies on GFRP Composites: A Review

Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In : MATEC Web of Conferences. 144, 02026.

Research output: Contribution to journalConference article

Glass fibers
Polymers
Composite materials
Environmental chambers
Fibers
Carbon steel
Aging of materials
Powders
Composite materials
Metals

Machinability and related properties of austempered ductile iron: A review

Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In : Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

Research output: Contribution to journalArticle

Nodular iron
Machinability
Wear resistance
Mechanical properties
Toughness
Nodular iron
Machinability
Manganese
Surface roughness
Machining
1 Citation (Scopus)

Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel

Gurumurthy, B. M., Sharma, S., Achutha Kini, U., Hegde, A. & Patil, A., 01-12-2018, In : Journal of Mechanical Engineering and Sciences. 12, p. 4018-4029 12 p.

Research output: Contribution to journalArticle

Hardening
Ferrite
Steel
Bainite
Martensite

Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

Research output: Contribution to journalArticle

Powders
Carbon steel
Copper
Reinforcement
Composite materials

Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

Research output: Contribution to journalConference article

Inert gas welding
Tungsten
Design of experiments
Welding
Welds

Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

Research output: Contribution to journalConference article

Silicon oxides
Aging of materials
Metals
Hardness
Composite materials

Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In : International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

Research output: Contribution to journalArticle

Age hardening
Inert gases
Tungsten
Welds
Tensile strength

Quench hardening and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

Research output: Contribution to journalArticle

Steel
Castor Oil
Hardening
Ice
Water
1 Citation (Scopus)

Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

Harisha, S. R., Sharma, S., Kini, U. A. & Gowri Shankar, M. C., 09-01-2018, In : MATEC Web of Conferences. 144, 02008.

Research output: Contribution to journalConference article

Alloy steel
Carbon steel
Heat treatment
Carbon
Mechanical properties
2 Citations (Scopus)

Tensile fractography of artificially aged Al6061-B4C composites

Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In : Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

Research output: Contribution to journalArticle

Fractography
Aging of materials
Composite materials
Hardness
Reinforcement

The hardness behaviour of TIG welded al6061 alloy using statistical tool

Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In : Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Noble Gases
Tungsten
Age hardening
2017
22 Citations (Scopus)

A review on finite element method for machining of composite materials

Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In : Composite Structures. 176, p. 790-802 13 p.

Research output: Contribution to journalReview article

Drilling
Machining
Finite element method
Composite materials
Delamination
1 Citation (Scopus)

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon Dioxide
Aging of materials
Silica
silicon dioxide
composite materials

Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SICp composites

Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Noble Gases
Tungsten
precipitation hardening
Age hardening
Inert gases
1 Citation (Scopus)

Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Martensite
Ferrite
Tempering
Impact resistance
6 Citations (Scopus)

FRP-Nanoclay hybrid composites: A review

Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

hybrid composites
mechanical properties
Mechanical properties
Composite materials
Nanocomposites
5 Citations (Scopus)

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
heat treatment
Hardness
Heat treatment
Wear of materials