• 108 Citations
  • 5 h-Index
20102019
If you made any changes in Pure these will be visible here soon.

Research Output 2010 2019

  • 108 Citations
  • 5 h-Index
  • 53 Article
  • 9 Conference contribution
  • 6 Conference article
  • 2 Review article
Filter
Article
2019
2 Citations (Scopus)
Glass fibers
Drilling
Machining
Polymers
Composite materials
Steel
Low carbon steel
Microstructure
Wear of materials
Case hardening
3 Citations (Scopus)

Effect of hygrothermal aging on the mechanical properties of nanoclay-glass fiber-epoxy composite and optimization using full factorial design

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P., Gowrishankar, M. C., Hegde, A. & Siddhartha, D., 20-03-2019, In : Materials Research Express. 6, 6, 065311.

Research output: Contribution to journalArticle

Glass fibers
Aging of materials
Bending strength
Mechanical properties
Composite materials
Bending strength
Tensile strength
Glass fibers
Composite materials
Polymers
Austenite
Ferrite
Mechanical properties
Microstructure
Steel
Open Access
Carburizing
Steel
Powders
Carbonates
Carbon

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

Steel
Age hardening
Powders
Carbon steel
Metals
Thermal shock
Glass fibers
Microstructure
Composite materials
Bending strength
4 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

Glass fibers
Polymers
Bending strength
Tensile strength
Composite materials

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Martensite
Ferrite
Steel
Toughness
Hardness

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

Nodular iron
Manganese
Hardness
Heat treatment
Tensile strength

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Composite materials
Reinforcement
Impact resistance
Tensile strength
Aging of materials

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Steel
Heat treatment
Mechanical properties
Machinability
Carbon steel

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
Polyesters
Mechanical testing
Glass fibers
Laminates
Bending strength

Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCIp composites

Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

Research output: Contribution to journalArticle

Age hardening
Cast iron
Aging of materials
Hardness
Composite materials

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

Polyesters
Delamination
Glass fibers
Drilling
Composite materials

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In : International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Powders
Steel
Composite materials

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Microhardness
Wear resistance
Nanocomposites
Clay
Sonication

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

Tensile strength
Age hardening
Aging of materials
Dispersion hardening
Cold working
1 Citation (Scopus)

Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In : Materials Research Express. 6, 8, 085333.

Research output: Contribution to journalArticle

Aging of materials
Mechanical properties
Water
Composite materials
Epoxy Resins

Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

Research output: Contribution to journalArticle

Cast iron
Reinforcement
Wear of materials
Composite materials
Wear resistance
2018

Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

Research output: Contribution to journalArticle

Iron analysis
Nodular iron
Analysis of variance (ANOVA)
Hardness
Nickel
4 Citations (Scopus)
Glass fibers
Moisture
Bending strength
Mechanical properties
Tensile strength
Nodular iron
Machinability
Manganese
Hardness
Toughness
1 Citation (Scopus)

Effect of heat treatment and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

Research output: Contribution to journalArticle

Steel
Tensile strength
Hardness
Heat treatment
Wear of materials
Age hardening
Inert gases
Silicon carbide
Tungsten
Tensile strength

Effect of precipitation hardening on stir cast AL6061-B4C reinforced composite

Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

Research output: Contribution to journalArticle

Age hardening
Aging of materials
Composite materials
Tensile strength
Hardness

Effect of preheat treatment structure on mechanical characterization of AISI 4340 ferrite bainite dual phase steel

Gurumurthy, B. M., Sharma, S. S., Kini, A. & Mansoor, S. I., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 84-89 6 p.

Research output: Contribution to journalArticle

Bainite
Ferrite
Steel
Ductility
Hardness
1 Citation (Scopus)

Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B4C and Al6061-SiC Composites

Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Composite materials
Age hardening
Alloying elements
Carbon steel
Aging of materials
Powders
Composite materials
Metals

Machinability and related properties of austempered ductile iron: A review

Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In : Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

Research output: Contribution to journalArticle

Nodular iron
Machinability
Wear resistance
Mechanical properties
Toughness
Nodular iron
Machinability
Manganese
Surface roughness
Machining
1 Citation (Scopus)

Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel

Gurumurthy, B. M., Sharma, S., Achutha Kini, U., Hegde, A. & Patil, A., 01-12-2018, In : Journal of Mechanical Engineering and Sciences. 12, p. 4018-4029 12 p.

Research output: Contribution to journalArticle

Hardening
Ferrite
Steel
Bainite
Martensite

Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

Research output: Contribution to journalArticle

Powders
Carbon steel
Copper
Reinforcement
Composite materials

Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In : International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

Research output: Contribution to journalArticle

Age hardening
Inert gases
Tungsten
Welds
Tensile strength

Quench hardening and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

Research output: Contribution to journalArticle

Steel
Castor Oil
Hardening
Ice
Water
2 Citations (Scopus)

Tensile fractography of artificially aged Al6061-B4C composites

Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In : Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

Research output: Contribution to journalArticle

Fractography
Aging of materials
Composite materials
Hardness
Reinforcement

The hardness behaviour of TIG welded al6061 alloy using statistical tool

Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In : Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Noble Gases
Tungsten
Age hardening
2017

Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In : Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

Research output: Contribution to journalArticle

microstructure
rupture
Microstructure
Composite materials
mechanical property
8 Citations (Scopus)

Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In : Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

Research output: Contribution to journalArticle

Polymers
Polyesters
Tensile strength
Hardness
Composite materials
2016

Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In : International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

Research output: Contribution to journalArticle

Hardening
Carbon
Steel
Heat treatment
Impact strength
2 Citations (Scopus)

Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In : International Journal of Technology. 7, 6, p. 1000-1008 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Composite materials
Metals
Wear resistance
2 Citations (Scopus)

Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In : Indian Journal of Science and Technology. 9, 37, 97422.

Research output: Contribution to journalArticle

Hardness
Heat treatment
Mechanical properties
Wear resistance
Steel
1 Citation (Scopus)

Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B4C particles

Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In : Indian Journal of Science and Technology. 9, 12, 88073.

Research output: Contribution to journalArticle

Aging of materials
Wear of materials
Composite materials
Wear resistance
Hardness
1 Citation (Scopus)

Study on dual-phase structure of AISI4140 steel

Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In : Indian Journal of Science and Technology. 9, 33, 93526.

Research output: Contribution to journalArticle

Phase structure
Steel
Impact resistance
Bainite
High strength steel
2015
23 Citations (Scopus)

Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In : Tribology International. 92, p. 462-471 10 p., 3770.

Research output: Contribution to journalArticle

hybrid composites
Graphite
Granite
granite
fillers
1 Citation (Scopus)

Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy

Gowri Shankar, M. C., Achutha Kini, U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 18-24 7 p.

Research output: Contribution to journalArticle

Age hardening
Reinforcement
Aging of materials
Precipitates
Composite materials
2 Citations (Scopus)

Influence of aging temperature and aging time on the mechanical property and microstructure during precipitation hardening of Al 6061 alloy

Gowri, S. M. C., Achutha, K. U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 25-31 7 p.

Research output: Contribution to journalArticle

Age hardening
Aging of materials
Electron microscopes
Mechanical properties
Microstructure
1 Citation (Scopus)

Production, testing and microstructural investigation on fly ash reinforced aluminium alloy matrix composite

Shivaprakash, Y. M., Gurumurthy, B. M., Sharma, S. S., Jayashree, P. K. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 20, p. 41583-41590 8 p.

Research output: Contribution to journalArticle

Fly ash
Aluminum alloys
Composite materials
Testing
Precipitates