Vijaya M Kini – Research output — Manipal Academy of Higher Education, Manipal, India

View Scopus Profile

Phone +91-9844387563
Emailmv.kinimanipaledu
Websitehttps://manipal.edu/mit/department-faculty/faculty-list/m-vijaya-kini.html

h-index

Research activity per year

If you made any changes in Pure these will be visible here soon.

20 Article
5 Conference article
2 Conference contribution
1 Review article

20 results

Filter

Damage Characterization of Ultra High Molecular Weight Polyethylene/ Flax/Jute Fiber Reinforced Melamine Formaldehyde Hybrid Composites using Cone Beam Computed Tomography
Shenoy Heckadka, S., Pai Ballambat, R., Kini Manjeshwar, V., Kumar, M., Hegde, P. & Kamath, A., 2022, In: Nondestructive Testing and Evaluation. 37, 4, p. 400-426 27 p.
Research output: Contribution to journal › Article › peer-review
Effect of chemical treatments on hardness and toughness properties of Grewia serrulata reinforced polymer composites
Satish Shenoy, B., Mahesha, G. T., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2019, In: Journal of Mechanical Engineering Research and Developments. 42, 4, p. 228-230 3 p.
Research output: Contribution to journal › Article › peer-review

Open Access
4 Citations (Scopus)
Effect of fiber treatments on mechanical properties of Grewia serrulata bast fiber reinforced polyester composites
Mahesha, G. T., Shenoy, S. B., Kini, V. M. & Padmaraja, N. H., 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 138-144 7 p.
Research output: Contribution to journal › Article › peer-review
7 Citations (Scopus)
Effect of groove location on the dynamic characteristics of multiple axial groove water lubricated journal bearing
Vijaya Kini, M., Pai, R. S., Srikanth Rao, D., Satish Shenoy, B. & Pai, R., 12-2009, In: World Academy of Science, Engineering and Technology. 36, p. 738-742 5 p.
Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus)
Effect of heat treatment and mechanical characterization of AISI 4140 steel
Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.
Research output: Contribution to journal › Article › peer-review
5 Citations (Scopus)
Effect of machining parameters on surface roughness and material removal rate in finish turning of ±30° glass fibre reinforced polymer pipes
Kini, M. V. & Chincholkar, A. M., 01-08-2010, In: Materials and Design. 31, 7, p. 3590-3598 9 p.
Research output: Contribution to journal › Article › peer-review
34 Citations (Scopus)
Experimental investigation on fatigue behaviour of glass/epoxy quasi-isotropic laminate composites under different ageing conditions
Padmaraj, N. H., Vijaya, K. M. & Dayananda, P., 02-2021, In: International Journal of Fatigue. 143, 105992.
Research output: Contribution to journal › Article › peer-review
8 Citations (Scopus)
Experimental investigation on solid particle erosion behaviour of glass/epoxy Quasi-isotropic laminates
Padmaraj, N. H., Vijaya, K. M. & Dayananda, P., 12-06-2019, In: Materials Research Express. 6, 8, 085339.
Research output: Contribution to journal › Article › peer-review
7 Citations (Scopus)
Experimental investigations on the moisture absorption and mechanical behaviour of basalt-aramid/epoxy hybrid interply composites under different ageing environments
Pai, Y., Pai K, D. & Kini, M. V., 2022, In: Cogent Engineering. 9, 1, 2080354.
Research output: Contribution to journal › Article › peer-review

Open Access
Experimental study on the tension-tension fatigue behaviour of glass/epoxy quasi-isotropic composites
Padmaraj, N. H., Vijaya, K. M. & Dayananda, P., 01-01-2019, In: Journal of King Saud University - Engineering Sciences.
Research output: Contribution to journal › Article › peer-review

Open Access
5 Citations (Scopus)
Fatigue behaviour and damage characterization of quasi-isotropic carbon/epoxy laminates
Padmaraj, N. H., Dayananda Pai, K., Shreepannaga, S. & Vijaya Kini, M., 2022, In: Cogent Engineering. 9, 1, 2077680.
Research output: Contribution to journal › Article › peer-review

Open Access
Influence of a Novel Hardener p-toluene Sulfonic Acid on Mechanical and Wear Response of Phenolic-Based Friction Materials
Pai, A., Kini, M. V. & Pokharel, V., 03-09-2017, In: Tribology Transactions. 60, 5, p. 770-780 11 p.
Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus)
Influence of seawater absorption on vibrational and tensile characteristics of quasi-isotropic glass/epoxy composites
Pavan, A., Dayananda, P., Vijaya, K. M., Hegde, S. & Narampady Hosagade, P., 01-01-2019, In: Journal of Materials Research and Technology. 8, 1, p. 1427-1433 7 p.
Research output: Contribution to journal › Article › peer-review

Open Access
12 Citations (Scopus)
Influence of stack sequence on the mechanical characteristics of hybrid composites analyzed using cone beam computed tomography and scanning electron microscopy
Shenoy Heckadka, S., Pai Ballambat, R., Kini Manjeshwar, V., Kumar, M., Hegde, P. & Kamath, A., 2020, (Accepted/In press) In: Polymer Composites.
Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus)
Investigation of tensile strength for areca frond/corn starch composites
Heckadka, S. S., Nayak, S. Y., Vikas, S. R., Kini, M. V. & Padmaraj, N. H., 01-09-2016, In: Indian Journal of Science and Technology. 9, 35, 95008.
Research output: Contribution to journal › Article › peer-review
4 Citations (Scopus)
Investigation of the Mechanical Properties of Flax/Jute/UHMWPE Reinforced Melamine Formaldehyde Composites Using Cone Beam Computed Tomography
Shenoy Heckadka, S., Ballambat, R. P., Kini, M. V., Bhagavath, P., Vineetha, R., Hegde, P., Kamath, A. & Sonali, M., 2022, (Accepted/In press) In: Journal of Natural Fibers.
Research output: Contribution to journal › Article › peer-review
Mechanical Characterization and Water Ageing Behavior Studies of Grewia Serrulata Bast Fiber Reinforced Thermoset Composites
Mahesha, G. T., Satish, S. B., Kini, M. V. & Subrahmanya, B. K., 02-11-2017, In: Journal of Natural Fibers. 14, 6, p. 788-800 13 p.
Research output: Contribution to journal › Article › peer-review
12 Citations (Scopus)
Preparation of Unidirectional Grewia Serrulata Fiber-Reinforced Polyester Composites and Evaluation of Tensile and Flexural Properties
Mahesha, G. T., Satish, S. B., Vijaya, K. M. & Bhat, K. S., 02-09-2016, In: Journal of Natural Fibers. 13, 5, p. 547-554 8 p.
Research output: Contribution to journal › Article › peer-review
19 Citations (Scopus)
Slurry erosion behaviour of carbon/epoxy quasi-isotropic laminates based on Taguchi's optimization method
Padmaraj, N. H., Vijaya, K. M., Shreepannaga, Amritha, U. & Dayananda, P., 01-05-2021, In: Engineering Failure Analysis. 123
Research output: Contribution to journal › Article › peer-review
5 Citations (Scopus)
Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites
Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-8 8 p.
Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus)