Search concepts
|
Selected filters
|
- 18,550 - 18,600 out of 22,835 results
- Export search results
Search results
-
Conference article
COMBUSTION and EMISSION CHARACTERISTICS of DIESEL, B100 and B20 FUEL on A THERMAL BARRIER COATING on PISTON CROWN in DIRECT INJECTION C.I. ENGINE at OPTIMUM IOP and IT
Dhananjaya, D. A., Mohanan, P. & Sudhir, C. V., 13-12-2009, In: SAE Technical Papers. 2009-December, DecemberResearch output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Comparative Analysis of 5 level, 7 level and 9 level Half-Bridge Modular Multilevel Converter
Jatin, Agarwal, A. & Jadoun, V. K., 13-05-2020, In: Journal of Physics: Conference Series. 1478, 1, 012012.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Comparative analysis of Machine Learning algorithms for Intrusion Detection
Pai, V., Devidas & Adesh, N. D., 06-01-2021, In: IOP Conference Series: Materials Science and Engineering. 1013, 1, 012038.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Comparative evaluation of efficacy of Zinc oxide and Copper oxide nanoparticles as antimicrobial additives in alginate impression materials
Ginjupalli, K., Alla, R., Shaw, T., Tellapragada, C., Kumar Gupta, L. & Nagaraja Upadhya, P., 01-01-2018, In: Materials Today: Proceedings. 5, 8, p. 16258-16266 9 p.Research output: Contribution to journal › Conference article › peer-review
4 Citations (Scopus) -
Comprehensive review of parameters influencing the performance of magnetorheological elastomers embedded in beams
Barman, H. & Hegde, S., 2019, In: Materials Today: Proceedings. 26, p. 2130-2135 6 p.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Coordinated voltage control in 3 phase unbalanced distribution system with multiple regulators using genetic algorithm
Shivarudrswamy, R., Gaonkar, D. N. & Nayak, S. K., 01-01-2012, In: Energy Procedia. 14, p. 1199-1206 8 p.Research output: Contribution to journal › Conference article › peer-review
7 Citations (Scopus) -
Current Status of Methods Used in Degradation of Polymers: A Review
Kulkarni, A. & Dasari, H., 09-01-2018, In: MATEC Web of Conferences. 144, 02023.Research output: Contribution to journal › Conference article › peer-review
6 Citations (Scopus) -
Design, fabrication and testing of carbon fiber reinforced epoxy drive shaft for all terrain vehicle using filament winding
Vishal, S. P., Nayak, S. Y., Amin, N. M., Heckadka, S. S., Prakash, C. S. & Mabbu, R., 26-02-2018, In: MATEC Web of Conferences. 153, 04010.Research output: Contribution to journal › Conference article › peer-review
3 Citations (Scopus) -
Design and Analysis of Split Fixture for Gear Hobbing Machine
Shenoy, P., Nithesh, N., Shettar, M., Debarghya & Abbas, W., 09-01-2018, In: MATEC Web of Conferences. 144, 01014.Research output: Contribution to journal › Conference article › peer-review
-
Design and antimicrobial activity of piperazine polymer nanocomposite
Jalageri, M. D., Puttaiahgowda, Y. M. & Hariprasad, 2019, In: Materials Today: Proceedings. 15, p. 262-267 6 p.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Design and Optimisation of a Low Reynolds Number Airfoil for Small Horizontal Axis Wind Turbines
Radhakrishnan, J. & Suri, D., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012053.Research output: Contribution to journal › Conference article › peer-review
-
Design and Optimization of Supersonic Intake
Merchant, V. & Radhakrishnan, J., 07-09-2017, In: IOP Conference Series: Materials Science and Engineering. 225, 1, 012298.Research output: Contribution to journal › Conference article › peer-review
-
Design and Simulation of a Vapour Compression Refrigeration System Using Phase Change Material
Siddharth, R., Jagannath, K., Kini Giridhar, P. & Vishnumurthy, K. K., 09-01-2018, In: MATEC Web of Conferences. 144, 04002.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Design of Flexural Members Reinforced with GFRP Bars
Sethi, A. K., Kinjawadekar, T. A., Nagarajan, P. & Shashikala, A. P., 09-10-2020, In: IOP Conference Series: Materials Science and Engineering. 936, 1, 012036.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Design of high speed carry select adder using modified parallel prefix adder
Hebbar, A. R., Srivastava, P. & Joshi, V. K., 01-01-2018, In: Procedia Computer Science. 143, p. 317-324 8 p.Research output: Contribution to journal › Conference article › peer-review
-
Design of Short Columns Reinforced with GFRP Bars Subjected to Axial Loading
Niyazuddin, Kinjawadekar, T. A., Nagarajan, P. & Shashikala, A. P., 09-10-2020, In: IOP Conference Series: Materials Science and Engineering. 936, 1, 012003.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Detection of Potholes and Speedbumps by Monitoring Front Traffic
Nagarajan, K. & Jindal, A., 18-01-2019, In: SAE Technical Papers. 2019-January, JanuaryResearch output: Contribution to journal › Conference article › peer-review
-
Development and evaluation of radiopaque, light cure composite
Valiathan, A., Krishnan, V. K., Mohanty, M. & Bhat, K. S., 29-05-1999, In: Biomedical Sciences Instrumentation. 35, p. 421-426 6 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Development of short areca fiber reinforced biodegradable composite material
Padmaraj, N. H., Kini, M. V., Pai, B. R. & Shenoy, B. S., 01-01-2013, In: Procedia Engineering. 64, p. 966-972 7 p.Research output: Contribution to journal › Conference article › peer-review
Open Access19 Citations (Scopus) -
Dry sliding wear behaviour of Ta/NbC filled glass-epoxy composites at elevated temperatures
Mohan, N., Mahesha, C. R., Shivarudraiah, Mathivanan, N. R. & Shivamurthy, B., 2013, In: Procedia Engineering. 64, p. 1166-1172 7 p.Research output: Contribution to journal › Conference article › peer-review
Open Access8 Citations (Scopus) -
Dynamic characteristics of drilling spindle supported by radial permanent magnet bearings
Chalageri, G. R., Bekinal, S. I. & Doddamani, M., 13-05-2020, In: Materials Today: Proceedings. 28, p. 2190-2196 7 p.Research output: Contribution to journal › Conference article › peer-review
-
Effect of annealing temperature on the structural and optical properties of zinc oxide (ZnO) thin films prepared by spin coating process
Sanjeev, S. & Kekuda, D., 01-01-2015, In: IOP Conference Series: Materials Science and Engineering. 73, 1, 012149.Research output: Contribution to journal › Conference article › peer-review
25 Citations (Scopus) -
Effect of bamboo char and boron carbide particles on mechanical characteristics of Aluminum 6061 hybrid composites
Chethan, K. N., Pai, A., Padmaraj, N. H., Singhal, A. & Sinha, S., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012038.Research output: Contribution to journal › Conference article › peer-review
4 Citations (Scopus) -
Effect of bio-ethanol on the performance and emission of a biodiesel fueled compression ignition engine
Bhat, S. N., Shenoy, S. & Dinesha, P., 09-01-2018, In: MATEC Web of Conferences. 144, 04017.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Effect of Cadmium Dopant on Structure and Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique
Joishy, S., Sindhu, H. S. & Rajendra, B. V., 01-01-2018, In: IOP Conference Series: Materials Science and Engineering. 360, 1, 012050.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Effect of chemical treatment on the physical and mechanical properties of flax fibers: A comparative assessment
Nayak, S. Y., Shenoy Heckadka, S., Seth, A., Prabhu, S., Sharma, R. & Shenoy, K. R., 2020, In: Materials Today: Proceedings. 38, p. 2406-2410 5 p.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Effect of combined U-shaped and semi-circular rib on heat transfer augmentation of solar air heater-A CFD study
Manjunath, M. S., 22-12-2020, In: Journal of Physics: Conference Series. 1706, 1, 012206.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Effect of hybridization on the mechanical properties of chopped strand mat/pineapple leaf fibre reinforced polyester composites
Nayak, S. Y., Heckadka, S. S., Amin, N. M., Sadanand, R. V. & Thomas, L. G., 26-02-2018, In: MATEC Web of Conferences. 153, 01006.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
EFFECT of INJECTION PRESSURE and INJECTION TIMING on A SEMI-ADIABATIC CI ENGINE FUELED with BLENDS of JATROPHA OIL METHYL ESTERS
Dhananjaya, D. A., Mohanan, P. & Sudhir, C. V., 09-01-2008, In: SAE Technical Papers. 2008-September, SeptemberResearch output: Contribution to journal › Conference article › peer-review
3 Citations (Scopus) -
Effect of microwave irradiation power for the morphological changes of ZnO nanoparticles
Pavithra, K. S., Fasiulla, Yashoda, M. P. & Prasannakumar, S., 09-12-2019, In: IOP Conference Series: Materials Science and Engineering. 577, 1, 012120.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Effect of Mn substitution on the thermal expansion of EuBa2Cu3O7-δ
Rao, A., 01-01-2012, In: Physics Procedia. 36, p. 606-610 5 p.Research output: Contribution to journal › Conference article › peer-review
-
Effect of volumetric heat capacity of chill material on the hardness and thermal diffusivity of Al6061-quartz composite
Hiremath, A., 2019, In: Materials Today: Proceedings. 28, p. 2241-2246 6 p.Research output: Contribution to journal › Conference article › peer-review
-
Effects of low pressure plasma irradiation on electrical resistivity of perovskite oxide Eu 1-x Sr x MnO 3
Deka, U. & Rao, A., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012173.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Efficacy of air heat exchanger based decay heat removal system through passive mode: A numerical study
Elton, D. N., Arunachala, U. C. & Dolfred, V. F., 2019, In: Materials Today: Proceedings. 28, p. 2286-2294 9 p.Research output: Contribution to journal › Conference article › peer-review
-
Energy Conservation Building Code (ECBC) based optimum wall composition with respect to thermal transmittance and thickness for different commercial pockets of Tier-1 city in temperate climatic zone of India
Shetty, S., Kishore, P., Kini, P., Acharya, R. R. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 229-236 8 p.Research output: Contribution to journal › Conference article › peer-review
Open Access1 Citation (Scopus) -
Energy Efficient Design and Modification of an Automotive Exhaust Muffler for Optimum Noise, Transmission loss, Insertion loss and Back pressure: A Review
Christopher George, T. & Vinod Raj, H. G., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012127.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Enhancement of fetal electrocardiogram by simultaneous cancellation of maternal ecg component and baseline wander
Padmashri, T. K. & Niranjan, U. C., 01-12-1996, In: Annual International Conference of the IEEE Engineering in Medicine and Biology - Proceedings. 5, p. 2261-2262 2 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Enhancing the mechanical properties of jute fiber reinforced green composites varying cashew nut shell liquid composition and using mercerizing process
Naik, N., Shivamurthy, B., Thimappa, B. H. S., Govil, A., Gupta, P. & Patra, R., 01-01-2019, In: Materials Today: Proceedings. 19, p. 434-439 6 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Evaluation of conventional drilling and helical milling for processing of holes in titanium alloy Ti6Al4V
Barman, A., Adhikari, R. & Bolar, G., 2019, In: Materials Today: Proceedings. 28, p. 2295-2300 6 p.Research output: Contribution to journal › Conference article › peer-review
-
Evaluation of properties of Glass Ionomer Cement reinforced with Zinc Oxide nanoparticles - An in vitro study
Agarwal, P., Nayak, R., Upadhya, P. N., Ginjupalli, K. & Gupta, L., 01-01-2018, In: Materials Today: Proceedings. 5, 8, p. 16065-16072 8 p.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
Experimental and numerical analysis of convergent nozzlex
Srinivas, G. & Rakham, B., 01-01-2017, In: IOP Conference Series: Materials Science and Engineering. 197, 1, 012081.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Experimental and numerical investigation of mode II failure behavior evaluation using three point bend, end notched flexure test
Nikhil, R., Shivakumar, S., Anupama, K. & Manjunath, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02009.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Experimental Studies on Al (5.7% Zn) Alloy based Hybrid MMC
Shivaprakash, Y. M., Ramu, H. C., Chiranjivee, Kumar, R. & Kumar, D., 03-03-2018, In: IOP Conference Series: Materials Science and Engineering. 310, 1, 012004.Research output: Contribution to journal › Conference article › peer-review
3 Citations (Scopus) -
Experimental Studies on SiC and Rice Husk Ash Reinforced Al Alloy Composite
Shivaprakash, Y. M., Sarkar, A., Jha, S., Singh, M. & Bangera, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02002.Research output: Contribution to journal › Conference article › peer-review
1 Citation (Scopus) -
Experimental studies on twin PTCs driven by dual piston head linear compressor
Gour, A. S., Joy, J., Sagar, P., Sudharshan, H., Mallappa, A., Karunanithi, R. & Jacob, S., 01-03-2017, In: IOP Conference Series: Materials Science and Engineering. 171, 1, 012075.Research output: Contribution to journal › Conference article › peer-review
-
Experimental validation of energy parameters in parabolic trough collector with plain absorber and analysis of heat transfer enhancement techniques
Bilal, F. R., Arunachala, U. C. & Sandeep, H. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012030.Research output: Contribution to journal › Conference article › peer-review
7 Citations (Scopus) -
Exploring Energy Conservation in Office Buildings with Thermal Comfort Criterion Towards Sustainable New Developments in Warm and Humid Climate
Kini, P., Garg, N. K. & Kamath, K., 01-03-2017, In: Energy Procedia. 111, p. 277-286 10 p.Research output: Contribution to journal › Conference article › peer-review
Open Access5 Citations (Scopus) -
Fabrication and characterization of ZnO/AI/ZnO multilayers by simultaneous DC and RF magnetron sputtering
Nagaraja, K. K., Kumar, A. S. & Nagaraja, H. S., 01-01-2015, In: IOP Conference Series: Materials Science and Engineering. 73, 1, 012071.Research output: Contribution to journal › Conference article › peer-review
Open Access -
Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal
Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In: Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.Research output: Contribution to journal › Conference article › peer-review
3 Citations (Scopus) -
Fabrication and performance analysis of concentrated hybrid photovoltaic system
Murthy, K., Daniel, A., Concessao, L., Roy, H. A. & Ganesha, A., 09-01-2018, In: MATEC Web of Conferences. 144, 04023.Research output: Contribution to journal › Conference article › peer-review