Find Research outputs

Search results

• Conference article

  Simulation and Comparative performance analysis of Modified Cyclone Dust Separator

  Bhade, S. & Hegde, S., 09-12-2019, In: IOP Conference Series: Materials Science and Engineering. 577, 1, 012026.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Cyclone separators
  • Dust
  • Separators
  • Flow fields
  • Flow of gases

• Solar assisted liquid desiccant cooling using clay based membranes

  Priya, S. S., Reddy, S., Balachandar, P. & Wadhwania, S., 09-01-2018, In: MATEC Web of Conferences. 144, 04011.

  Research output: Contribution to journal › Conference article › peer-review

  • Hygroscopic Agents
  • Clay
  • Membranes
  • formic acid
  • Cooling

• Soot Oxidation Studies on SrMn_0.98B_0.02O₃ (B - Fe, Ni) Perovskites

  Uppara, H. P., Feroz, A., John, N. S., Singh, S. K., Labhsetwar, N. K. & Dasari, H., 28-10-2019, In: IOP Conference Series: Materials Science and Engineering. 654, 1, 012008.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • perovskite
  • Soot
  • Perovskite
  • Positive ions
  • Cations

• Standard framework to increase interest and participation of Indian High School and undergraduate students in space sciences

  Saikia, A., 01-01-2016, In: Proceedings of the International Astronautical Congress, IAC.

  Research output: Contribution to journal › Conference article › peer-review

  • Space research
  • aerospace sciences
  • ISRO
  • students
  • school

• Structural and fluid flow analysis of subsonic aircraft jet engine centrifugal compressor

  Agney, A., Singh, S. & Srinivas, G., 01-01-2018, In: Materials Today: Proceedings. 5, 9, p. 19507-19516 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Jet engines
  • Centrifugal compressors
  • Flow of fluids
  • Aircraft
  • Flow rate
  1 Citation (Scopus)

• Studies on influence of injection timing and Diesel replacement on LPG-Diesel dual-fuel engine

  Sudhir, C. V., Desai, V., Suresh Kumar, Y. & Mohanan, P., 01-12-2003, In: American Society of Mechanical Engineers, Internal Combustion Engine Division (Publication) ICE. 40, p. 161-166 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Dual fuel engines
  • Liquefied petroleum gas
  • Diesel engines
  • Smoke
  • Brakes
  3 Citations (Scopus)

• Study and Analysis of Torque Handling Capacity of Slot Headed Grub Screw

  Karthik, A. V., Bharath, G. J., Umashankar, H. P. & Behera, U., 27-06-2018, In: IOP Conference Series: Materials Science and Engineering. 376, 1, 012083.

  Research output: Contribution to journal › Conference article › peer-review

  • Torque
  • Torsion testing
  • Finite element method
  • Gears

• Study of a supply chain system with the presence of bullwhip effect

  Shrivastava, A., Kamath, R., Sharma, H. & Gogoi, A., 09-01-2018, In: MATEC Web of Conferences. 144, 05003.

  Research output: Contribution to journal › Conference article › peer-review

  • Supply chains
  • Dynamical systems

• Study of Dimple Effect on the Friction Characteristics of a Journal Bearing using Taguchi Method

  Murthy, A. A. & Raghunandana, D., 01-03-2018, In: IOP Conference Series: Materials Science and Engineering. 314, 1, 012014.

  Research output: Contribution to journal › Conference article › peer-review

  • Taguchi methods
  • Journal bearings
  • Friction
  • Bushings
  • Experiments
  3 Citations (Scopus)

• Study on Mechanical and microstructural characteristics of Friction Stir Welded Aluminium Matrix composite

  Prabhu, S. R. B., Shettigar, A., Herbert, M. & Rao, S., 01-01-2020, In: Materials Today: Proceedings. 24, p. 1183-1189 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Aluminum
  • Welds
  • Friction stir welding
  • Friction
  • Composite materials
  1 Citation (Scopus)

• Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

  Harisha, S. R., Sharma, S., Kini, U. A. & Gowri Shankar, M. C., 09-01-2018, In: MATEC Web of Conferences. 144, 02008.

  Research output: Contribution to journal › Conference article › peer-review

  • Alloy steel
  • Carbon steel
  • Heat treatment
  • Carbon
  • Iron alloys
  3 Citations (Scopus)

• Subcortical global aphasia without hemiparesis: A discussion

  Krishnan, G., Tiwari, S., Pai, A. & Rao, S. N., 01-01-2010, In: Procedia - Social and Behavioral Sciences. 6, p. 96-97 2 p.

  Research output: Contribution to journal › Conference article › peer-review

• Surface Engineering of Titanium Using Anodization and Plasma Treatment

  Mallaiah, M. & Gupta, R. K., 02-11-2020, In: IOP Conference Series: Materials Science and Engineering. 943, 1, 012016.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Titanium
  • Biocompatibility
  • Plasmas
  • Surface properties
  • titanium dioxide

• Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

  Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In: MATEC Web of Conferences. 77, 10006.

  Research output: Contribution to journal › Conference article › peer-review

  • Cold rolling
  • Steel
  • Residual stresses
  • Compressive stress
  • X ray diffraction
  2 Citations (Scopus)

• Surface properties of epoxy clay nanocomposite coating

  Muralishwara, K., Kini, U. A. & Sharma, S., 2020, In: Materials Today: Proceedings. 38, p. 2725-2731 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Clay
  • Sonication
  • Nanocomposites
  • Surface properties
  • Hardness

• Synthesis and characterization of metal organic framework-based photocatalyst and membrane for carbon dioxide conversion

  Mangal, S., Priya, S. S., Lewis, N. L. & Jonnalagadda, S., 01-01-2018, In: Materials Today: Proceedings. 5, 8, p. 16378-16389 12 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Metal-Organic Frameworks
  • Metalorganic frameworks
  • Photocatalysts
  • Carbon Dioxide
  • Carbon dioxide

• Synthesis of environmental-friendly polymer nanocomposite against pathogenic microorganism

  Akshatha, N. & Yashoda, M. P., 01-01-2019, In: Materials Today: Proceedings. 15, p. 273-276 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Silver compounds
  • Silver Compounds
  • Microorganisms
  • Nanocomposites
  • Polymers

• Tensile and Flexural Properties of Chopped Strand E-glass Fibre Mat Reinforced CNSL-Epoxy Composites.

  Nayak, S. Y., Heckadka, S. S., Thomas, L. G. & Baby, A., 09-01-2018, In: MATEC Web of Conferences. 144, 02025.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Tensile properties
  • Glass fibers
  • Composite materials
  • Microhardness
  4 Citations (Scopus)

• The effect of flow obstacles of different shapes for generating turbulent flow for improved performance of the solar air heater

  Yagnesh Sharma, N., Madhwesh, N. & Vasudeva Karanth, K., 01-01-2019, In: Procedia Manufacturing. 35, p. 1096-1101 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Turbulent flow
  • Turbulence
  • Solar collectors
  • Conversion efficiency
  • Air
  2 Citations (Scopus)

• The Effect of Lean Techniques on Elimination of Waste in Composite Panel Production Using Paired t-test

  Hiremath, P., Narayanan, S. & Shettar, M., 09-01-2018, In: MATEC Web of Conferences. 144, 05011.

  Research output: Contribution to journal › Conference article › peer-review

  • Composite materials
  • Profitability
  1 Citation (Scopus)

• The effect of Process Parameters on Material Removal Rate in Drilling of Al 6061-SiC composite

  Deepak, D. & Rajendra, B., 09-01-2018, In: MATEC Web of Conferences. 144, 03009.

  Research output: Contribution to journal › Conference article › peer-review

  • Drilling
  • Composite materials
  • Analysis of variance (ANOVA)
  • Coolants
  • Casting

• Thermal performance intensification of cam shaped tubes in staggered layout

  Mangrulkar, C. K., Dhoble, A. S., Sathe, T. M., Chamoli, S. & Arunkumar, H. S., 01-01-2018, In: International Conference on Computational Methods for Thermal Problems. 223309, p. 211-214 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Layout
  • Cams
  • Tube
  • Heat transfer
  • Pressure Drop

• Thermoacoustic Refrigerator for High Temperature Gradient

  Mishra, A., Choudhary, A. K., Tomar, T. & Korody, J., 09-01-2018, In: MATEC Web of Conferences. 144, 04003.

  Research output: Contribution to journal › Conference article › peer-review

  • Thermoacoustics
  • Refrigerators
  • Thermal gradients
  • Refrigeration
  • Videocassette recorders

• Thickness and oxygen partial pressure dependence on optical band gap of indium oxide by reactive evaporation method

  Ali, A. V. M. & Kekuda, D., 01-01-2015, In: IOP Conference Series: Materials Science and Engineering. 73, 1, 012027.

  Research output: Contribution to journal › Conference article › peer-review

  • indium oxide
  • Optical band gaps
  • Indium
  • Partial pressure
  • Evaporation
  1 Citation (Scopus)

• To Investigate the Influence of Building Envelope and Natural Ventilation on Thermal Heat Balance in Office Buildings in Warm and Humid Climate

  Kini, P. G., Garg, N. K. & Kamath, K., 10-07-2017, In: IOP Conference Series: Earth and Environmental Science. 73, 1, 012031.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • heat balance
  • office
  • ventilation
  • demand
  • air conditioning
  1 Citation (Scopus)

• Transport of curcumin from cross-linked chitosan matrices: A comparative study

  Nayak, R., Philip, J., Rodrigues, F. C. & Thakur, G., 12-11-2019, In: IOP Conference Series: Materials Science and Engineering. 561, 1, 012029.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Chitosan
  • Curcumin
  • Gels
  • genipin
  • Glutaral

• Twisted Tape Based Heat Transfer Enhancement in Parabolic Trough Concentrator - An Experimental study

  Elton, D. N. & Arunachala, U. C., 27-06-2018, In: IOP Conference Series: Materials Science and Engineering. 376, 1, 012034.

  Research output: Contribution to journal › Conference article › peer-review

  • Tapes
  • Heat transfer
  • Nusselt number
  • Heat flux
  • Fluids
  2 Citations (Scopus)

• Two dimensional rotor blade numerical analysis using ANSYS

  Anand, S., Shenoy, S. & Srinivas, G., 22-12-2020, In: Journal of Physics: Conference Series. 1706, 1, 012221.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • rotor blades
  • Space Shuttle Main Engine
  • numerical analysis
  • rocket engines
  • airfoils

• Understanding the effect of weld parameters on the microstructures and mechanical properties in dissimilar steel welds

  Singh, D. K., Sharma, V., Basu, R. & Eskandari, M., 01-01-2019, In: Procedia Manufacturing. 35, p. 986-991 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Welds
  • Microstructure
  • Mechanical properties
  • Steel
  • Grain boundaries
  1 Citation (Scopus)

• Universal languages recognition algorithm: Adapting to various liguistics

  Garg, N., 01-12-2012, In: Proceedings of International Conference on Computational Intelligence, Modelling and Simulation. p. 209-213 5 p., 6338077.

  Research output: Contribution to journal › Conference article › peer-review

  • Recognition Algorithm
  • Voice
  • Language
  • Customization
  • Speech Processing

• Use of Geocells to Protect Buried Pipelines and Underground Utilities in Soft Clayey Soils

  Hegde, A., Kadabinakatti, S. & Sitharam, T. G., 01-01-2016, In: Geotechnical Special Publication. 2016-January, 271 GSP, p. 914-924 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  • geocell
  • soft soil
  • geogrid
  • reinforcement
  • Soils
  3 Citations (Scopus)

• Vibration based condition monitoring of rotating machinery

  Senapaty, G. & Sathish Rao, U., 09-01-2018, In: MATEC Web of Conferences. 144, 01021.

  Research output: Contribution to journal › Conference article › peer-review

  • Rotating machinery
  • Vibration analysis
  • Condition monitoring
  • Defects
  • Industry

• Video Clip Retrieval Based on LBP Variance

  Shekar, B. H., Uma, K. P. & Holla, K. R., 01-01-2016, In: Procedia Computer Science. 89, p. 828-835 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Textures
  • Experiments
  3 Citations (Scopus)

• Vortex dynamics and elliptical structure wake interaction in the proximity of wall using 2-D RANS simulation

  Arunkumar, H. S., Mangrulkar, C. & Gohil, T., 09-01-2018, In: MATEC Web of Conferences. 144, 04018.

  Research output: Contribution to journal › Conference article › peer-review

  • Vortex flow
  • Reynolds number
  • Vortex shedding
  • Boundary layers
  1 Citation (Scopus)

• Wide viewing angle and fast responding TN LCD

  Chandrasekhar, S., Raja, V. N., Prasad, S. K. & Rao, D. S. S., 01-12-2004, In: Molecular Crystals and Liquid Crystals. 410

  Research output: Contribution to journal › Conference article › peer-review

  • Liquid crystal displays
  • Electric fields
  • Nematic liquid crystals
  • electric fields
  • Polyimides
  2 Citations (Scopus)
• Conference contribution

  170 MHz GBW, two stage CMOS operational amplifier with high slew rate using 180 nm technology

  Guruprasad & Shama, K., 29-03-2016, 12th IEEE International Conference Electronics, Energy, Environment, Communication, Computer, Control: (E3-C3), INDICON 2015. Institute of Electrical and Electronics Engineers Inc., 7443521

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Operational amplifiers
  • Capacitors
  • Analog integrated circuits
  • Differential amplifiers
  • Resistors

• 2 D tracking system for solar panels using SVM implemented by motion assistant of LabVIEW

  Santhosh, K. V., Dutta, T. & Rajshekar, J. S., 2013, International Conference on Signal Processing, Image Processing and Pattern Recognition 2013, ICSIPR 2013. Vol. 1. 6497931

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Support vector machines
  • Controllers
  • Sensors
  7 Citations (Scopus)

• 3D/4D multiscale imaging in acute lymphoblastic leukemia cells: Visualizing dynamics of cell death

  Sarangapani, S., Mohan, R. E., Patil, A., Lang, M. J. & Asundi, A., 01-01-2017, Fifth International Conference on Optical and Photonics Engineering. SPIE, Vol. 10449. 1044936

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Cell death
  • leukemias
  • Chitosan
  • Leukemia
  • death

• 3D Face recognition using significant point based SULD descriptor

  Shekar, B. H., Harivinod, N., Kumari, M. S. & Holla, K. R., 05-09-2011, International Conference on Recent Trends in Information Technology, ICRTIT 2011. p. 981-986 6 p. 5972443. (International Conference on Recent Trends in Information Technology, ICRTIT 2011).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Face Recognition
  • Face recognition
  • Wavelets
  • Smoothing
  4 Citations (Scopus)

• 3D model of the planetary system

  Shrivastava, A., 01-01-2012, Mechanical and Aerospace Engineering. p. 3111-3116 6 p. (Applied Mechanics and Materials; vol. 110-116).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Orbits
  • Planets
  • Solar system
  • Computer program listings

• 3D reconstruction of spine from partial biplanar radiographic image data

  Kumar, S., Nayak, K. P. & Hareesha, K. S., 01-09-2015, Proceedings - 2015 2nd International Conference on Biomedical Engineering, ICoBE 2015. Institute of Electrical and Electronics Engineers Inc., 7235127

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Angle measurement
  • Surgery
  • Visualization
  • Planning
  1 Citation (Scopus)

• 3D visualization and dept peeling of pulmonary vasculature and lung lesion using plain ct sequence

  Nandish, S., Gopalakrishna Prabhu, K. G., Kv, R., Mohandas, R. K. G. & Shetty, M., 09-03-2018, 2017 4th International Conference on Image Information Processing, ICIIP 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 34-37 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Peeling
  • Visualization
  • Technology
  • Volume rendering
  • Computerized tomography
  1 Citation (Scopus)

• 4G coverage analysis of Croatian main roads

  Shetty, S., Lackovic, S. & Pilinsky, S. Z., 29-11-2017, Proceedings of ELMAR 2017 59th International Symposium ELMAR. Croatian Society Electronics in Marine - ELMAR, Vol. 2017-September. p. 129-132 4 p. 8124451

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• 64th international astronautical congress 2013 space power symposium (C3) small and very small advanced space power systems (4)

  Vaidya, N., Shanker, A., Agarwal, A., Pramanik, A., Nagarajan, C., Dev, A. & John, T., 01-01-2013, 64th International Astronautical Congress 2013, IAC 2013. International Astronautical Federation, IAF, Vol. 9. p. 6847-6853 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • congress
  • electric batteries
  • battery
  • Satellites
  • Polychlorinated biphenyls

• A bottom up procedure for text line segmentation of Latin script

  Jain, H. & Kumar, A. P., 30-11-2017, 2017 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-January. p. 1182-1187 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Feature extraction

• A broker based approach for cloud provider selection

  Achar, R. & Thilagam, P. S., 26-11-2014, Proceedings of the 2014 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2014. Institute of Electrical and Electronics Engineers Inc., p. 1252-1257 6 p. 6968439

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Industry
  • Simulators
  • Internet
  • Experiments
  14 Citations (Scopus)

• A broker based architecture for E-learning web services discovery

  D'Mello, D. A. & Achar, R., 2011, Proceedings of the 2011 World Congress on Information and Communication Technologies, WICT 2011. p. 688-693 6 p. 6141329

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • E-learning
  • Web services
  • Reusability
  • Interoperability
  • Agglomeration
  3 Citations (Scopus)

• Accelerated Digitally Reconstructed Radiograph Generation Scheme for 2D to 3D Image Registration of Vertebrae Based on Sparse Sampling and Multi-Resolution

  Bhat, V., Bhat, S. N. & Anitha, H., 20-08-2018, 2017 9th International Conference on Advanced Computing, ICoAC 2017. Institute of Electrical and Electronics Engineers Inc., p. 51-57 7 p. 8441330

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Image registration
  • Registration
  • Sampling
  • Spine
  • Surgery
  1 Citation (Scopus)

• A chalcone derivative single crystal for the investigation of linear and nonlinear optical properties for laser assisted applications

  Parol, V., Upadhyaya, V., Prabhu, A. N. & Subrahmanya Bhat, K., 05-11-2020, DAE Solid State Physics Symposium 2019. Sharma, V. K., Prajapat, C. L. & Yusuf, S. M. (eds.). American Institute of Physics Inc., 030401. (AIP Conference Proceedings; vol. 2265).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • optical properties
  • sulfonates
  • single crystals
  • optical materials
  • phenyls

• Achieving quality product in a long term software product development in healthcare application using Lean and Agile principles: Software engineering and software development

  Manjunath, K. N., Jagadeesh, J. & Yogeesh, M., 18-07-2013, Proceedings - 2013 IEEE International Multi Conference on Automation, Computing, Control, Communication and Compressed Sensing, iMac4s 2013. p. 26-33 8 p. 6526379

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Product development
  • Software engineering
  • Medical imaging
  • Life cycle
  • Statistics
  9 Citations (Scopus)