Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Sathya Shankara Sharma
2017

Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2015
2 Citations (Scopus)
2019

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

2015

Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In : Tribology International. 92, p. 462-471 10 p., 3770.

Research output: Contribution to journalArticle

25 Citations (Scopus)
2017

Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2018

Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

Harisha, S. R., Sharma, S., Kini, U. A. & Gowri Shankar, M. C., 09-01-2018, In : MATEC Web of Conferences. 144, 02008.

Research output: Contribution to journalConference article

1 Citation (Scopus)
2019

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

2018

Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)
2019
5 Citations (Scopus)
2017

FRP-Nanoclay hybrid composites: A review

Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)
2019

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Open Access
2016

Study on dual-phase structure of AISI4140 steel

Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In : Indian Journal of Science and Technology. 9, 33, 93526.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2017

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2019

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

2 Citations (Scopus)
2016

Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In : Indian Journal of Science and Technology. 9, 37, 97422.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2019

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

2018
4 Citations (Scopus)

Machinability and related properties of austempered ductile iron: A review

Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In : Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2017

Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2016

Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In : International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

Research output: Contribution to journalArticle

2019
4 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

5 Citations (Scopus)
1 Citation (Scopus)

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

2017

Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In : Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

Research output: Contribution to journalArticle

2018

Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

Research output: Contribution to journalArticle

2019

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

2020

Study of cycle time reduction and assembly process improvement for various electric stackers

Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

Research output: Contribution to journalArticle

2017
10 Citations (Scopus)
2018
2019
1 Citation (Scopus)
2017

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)
2018

Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B4C and Al6061-SiC Composites

Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In : International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

Research output: Contribution to journalArticle

2016

Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In : MATEC Web of Conferences. 77, 10006.

Research output: Contribution to journalConference article

2018

Quench hardening and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

Research output: Contribution to journalArticle

2019
3 Citations (Scopus)
2015

Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy

Gowri Shankar, M. C., Achutha Kini, U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 18-24 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2019

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In : International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journalArticle

2018

Effect of precipitation hardening on stir cast AL6061-B4C reinforced composite

Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

Research output: Contribution to journalArticle

2020

Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

Research output: Contribution to journalArticle