|
Search concepts
|
|
Selected filters
|
- 26,350 - 26,400 out of 26,664 results
Search results
-
2018
Hygrothermal Studies on GFRP Composites: A Review
Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02026.Research output: Contribution to journal › Conference article › peer-review
9 Citations (Scopus) -
2016
Study on effect of thermo-structural loading on the PCB during Selective Soldering process using finite element method
Bhat, S. K., Deshpande, R., Beck, P., Hegde, S., Upadhyaya, Y. S. & Ghosh, C. K., 07-06-2016, 2016 International Conference on Electronics Packaging, ICEP 2016. Institute of Electrical and Electronics Engineers Inc., p. 542-547 6 p. 7486886Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
2019
Mechanical and morphological characterization of carbonized egg-shell fillers/Borassus fibre reinforced polyester hybrid composites
Baby, A., Nayak, S. Y., Heckadka, S. S., Purohit, S., Bhagat, K. K. & Thomas, L. G., 30-08-2019, In: Materials Research Express. 6, 10, 105342.Research output: Contribution to journal › Article › peer-review
8 Citations (Scopus) -
2012
Water Lubricated Bearings
Pai, R. & Hargreaves, D. J., 01-12-2012, Green Tribology: Biomimetics, Energy Conservation and Sustainability. p. 347-391 45 p. (Green Energy and Technology; vol. 49).Research output: Chapter in Book/Report/Conference proceeding › Chapter
15 Citations (Scopus) -
2010
Numerical analysis of a centrifugal fan for performance enhancement using boundary layer fences on the volute casing
Karanth, K. V. & Sharma, N. Y., 30-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 38-42 5 p. 5598488Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
2019
Investigation of the effect of process parameters on material removal rate in machining of is 5986 fe 410 steel by wire-EDM: The optimization and regression modeling
Deepak, D. & Rajendra, B., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 6, p. 411-420 10 p., IJMPERDDEC201935.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
2021
Mangifera Indica mid-rib fibers as reinforcements for CNSL-epoxy composites
Shenoy Heckadka, S., Nayak, S. Y. & Samant, R., 2021, (Accepted/In press) In: Journal of the Textile Institute.Research output: Contribution to journal › Article › peer-review
-
2020
Experimental study with analytical validation of energy parameters in parabolic trough collector with twisted tape insert
Arunachala, U. C., 06-2020, In: Journal of Solar Energy Engineering, Transactions of the ASME. 142, 3, 4045825.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
2021
Entropy Generation Minimization of Vapour Absorption Heat Transformer
Sekar, S., Chandrasekar, P., Kumar, S., Jospher, A. J. S., Sheeja, R., Valarmathi, T. N. & Lionus Leo, G. M., 2021, Theoretical, Computational, and Experimental Solutions to Thermo-Fluid Systems - Select Proceedings of ICITFES 2020. Palanisamy, M., Ramalingam, V. & Sivalingam, M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 265-274 10 p. (Lecture Notes in Mechanical Engineering).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2020
Surface Engineering of Titanium Using Anodization and Plasma Treatment
Mallaiah, M. & Gupta, R. K., 02-11-2020, In: IOP Conference Series: Materials Science and Engineering. 943, 1, 012016.Research output: Contribution to journal › Conference article › peer-review
Open Access1 Citation (Scopus) -
2021
Investigation on tensile properties and analysis of wear property of glass fiber-epoxy-nanoclay ternary nanocomposite using response surface methodology
Hiremath, P., Kini U, A., Shettar, M., Sharma, S. & P K, J., 2021, In: Cogent Engineering. 8, 1, 1877869.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Bibliometric Analysis of Research Trends in Rice Straw/Husk Reinforced Polymer Composites
Deepak, D., Madival, A. S. & Bongale, A. M., 2021, In: Library Philosophy and Practice. 2021, p. 1-36 36 p.Research output: Contribution to journal › Article › peer-review
-
2022
Stability performance of series coupled natural circulation system with different operating procedures
Elton, D. N., Arunachala, U. C. & Vijayan, P. K., 09-2022, In: International Journal of Thermal Sciences. 179, 107693.Research output: Contribution to journal › Article › peer-review
-
2019
Computational fluid dynamic study on effect of Carreau-Yasuda and Newtonian blood viscosity models on hemodynamic parameters
Kumar, N., Khader, A., Pai, R., Kyriacou, P., Khan, S. & Koteshwara, P., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 465-477 13 p.Research output: Contribution to journal › Article › peer-review
11 Citations (Scopus) -
2018
A study of inventory management at manufacturing industries in rural India
Shetty, P. K. & Raghavendra Kamath, C., 26-12-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 1, p. 73-80 8 p., IJMPERDFEB20198.Research output: Contribution to journal › Article › peer-review
Open Access14 Citations (Scopus) -
2013
Effect of staggered splitters on the flow characteristics in a centrifugal fan - A numerical study
Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-01-2013, In: International Journal of Earth Sciences and Engineering. 6, 4, p. 821-825 5 p.Research output: Contribution to journal › Article › peer-review
-
2019
Experimental study on the tension-tension fatigue behaviour of glass/epoxy quasi-isotropic composites
Padmaraj, N. H., Vijaya, K. M. & Dayananda, P., 01-01-2019, In: Journal of King Saud University - Engineering Sciences.Research output: Contribution to journal › Article › peer-review
Open Access4 Citations (Scopus) -
2022
Performance Evaluation of Transonic Axial Flow Compressor under Distorted Conditions by Groove Casing Technique with Tip Injection and Surface Roughness Effects
Srinivas, G., Raghunandana, K. & Shenoy, B. S., 2022, (Accepted/In press) In: Journal of The Institution of Engineers (India): Series C.Research output: Contribution to journal › Article › peer-review
Open Access -
2018
Tensile fractography of artificially aged Al6061-B4C composites
Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.Research output: Contribution to journal › Article › peer-review
17 Citations (Scopus) -
2020
Effect of combined U-shaped and semi-circular rib on heat transfer augmentation of solar air heater-A CFD study
Manjunath, M. S., 22-12-2020, In: Journal of Physics: Conference Series. 1706, 1, 012206.Research output: Contribution to journal › Conference article › peer-review
Open Access1 Citation (Scopus) -
2021
Experimental investigation of humidification parameters using biomass-based charcoal as an alternative packing material
Suranjan Salins, S., Kota Reddy, S. V., Shiva Kumar, K. & Stephen, C., 2021, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.Research output: Contribution to journal › Article › peer-review
Open Access -
2017
An experimental and numerical study on effects of exhaust gas temperature and flow rate on deposit formation in Urea-Selective Catalytic Reduction (SCR) system of modern automobiles
Sadashiva Prabhu, S., Nayak, N. S., Kapilan, N. & Hindasageri, V., 25-01-2017, In: Applied Thermal Engineering. 111, p. 1211-1231 21 p.Research output: Contribution to journal › Article › peer-review
53 Citations (Scopus) -
2018
Integer and fractional order-based viscoelastic constitutive modeling to predict the frequency and magnetic field-induced properties of magnetorheological elastomer
Poojary, U. R. & Gangadharan, K. V., 01-08-2018, In: Journal of Vibration and Acoustics, Transactions of the ASME. 140, 4, 0410071.Research output: Contribution to journal › Article › peer-review
15 Citations (Scopus) -
2021
Professional roles of female urologists: A webinar-based survey of perceptions and obstacles to career development
Ibrahim, S., Pietropaolo, A., Naik, N., Patel, A., Shah, M. J., Zondervan, P., McDonald, J., Zeeshan Hameed, B. M., Rai, B. P., Karimi, H., Somani, B. K. & Cresswell, J., 20-12-2021, In: Archivio Italiano di Urologia e Andrologia. 93, 4, p. 455-459 5 p.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
2022
Nosocomial Infections and Role of Nanotechnology
Ananda, T., Modi, A., Chakraborty, I., Managuli, V., Mukhopadhyay, C. & Mazumder, N., 02-2022, In: Bioengineering. 9, 2, 51.Research output: Contribution to journal › Review article › peer-review
Open Access -
Optimization of preheating temperature for TiB2reinforcement on the preparation of stir cast LM4 + TiB2composites and effect of artificial aging on hardness improvement using ANOVA
Srinivas, D., Gowrishankar, M. C., Sharma, S., Hegde, A., Gurumurthy, B. M. & Deepak, D., 2022, In: Manufacturing Review. 9, 8.Research output: Contribution to journal › Article › peer-review
Open Access -
2019
Solar still efficiency augmentation using cylindrical: Sweeping Agitator on the absorber plate
Manjunath, M., 31-08-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 4, p. 347-354 8 p.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
2021
Influence of End Mill Geometry on Milling Force and Surface Integrity While Machining Low Rigidity Parts
Joshi, S. N. & Bolar, G., 01-12-2021, In: Journal of The Institution of Engineers (India): Series C.Research output: Contribution to journal › Article › peer-review
Open Access -
2012
Real-time computer simulation of three dimensional elastostatics using the Finite Point Method
Kirana Kumara, P. & Ghosal, A., 2012, Mechanical and Aerospace Engineering. p. 2740-2745 6 p. (Applied Mechanics and Materials; vol. 110-116).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
2021
Experimental investigation and optimization of wall deflection and material removal rate in milling thin-wall parts
Bolar, G. & Joshi, S. N., 2021, In: Manufacturing Review. 8, 2021015.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
Two body wear characteristics of polyalthia longifolia/mangifera indica/jute fiber reinforced epoxy composites using taguchi technique
Heckadka, S. S., Nayak, S. Y., Rao, S., Samant, R., Shrinidhi, L. K. & Salunkhe, K. M., 2021, In: Materials Research. 24, 2, e20200323.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
2019
Thermal performance enhancement of flat plate solar air heater using transverse U-shaped turbulator - A numerical study
Manjunath, M. S., Venkatesh, R. & Madhwesh, N., 01-01-2019, In: Journal of Mechanical Engineering and Sciences. 13, 3, p. 5562-5587 26 p.Research output: Contribution to journal › Article › peer-review
8 Citations (Scopus) -
2020
Polymer nanocomposites for high-velocity impact applications-A review
Clifton, S., Thimmappa, B. H. S., Selvam, R. & Shivamurthy, B., 02-2020, In: Composites Communications. 17, p. 72-86 15 p.Research output: Contribution to journal › Review article › peer-review
40 Citations (Scopus) -
2021
The recent progress of synergistic supramolecular polymers: preparation, properties and applications
Huo, Y., He, Z., Wang, C., Zhang, L., Xuan, Q., Wei, S., Wang, Y., Pan, D., Dong, B., Wei, R., Naik, N. & Guo, Z., 11-02-2021, In: Chemical Communications. 57, 12, p. 1413-1429 17 p.Research output: Contribution to journal › Article › peer-review
17 Citations (Scopus) -
2020
A method for navigation of autonomous vehicles in outdoor environment through stereo correspondence
Shetty, A. A., George, V. I., Gurudas Nayak, C. & Shett, R., 01-01-2020, In: Journal of Advanced Research in Dynamical and Control Systems. 12, 3 Special Issue, p. 1044-1050 7 p.Research output: Contribution to journal › Article › peer-review
-
2017
Magnetic field and frequency dependent LVE limit characterization of magnetorheological elastomer
Poojary, U. R. & Gangadharan, K. V., 01-04-2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 4, p. 1365-1373 9 p.Research output: Contribution to journal › Article › peer-review
9 Citations (Scopus) -
2021
Reinforcements, production techniques and property analysis of AA7075 matrix composites-a critical review
Sowrabh, B. S., Gurumurthy, B. M., Shivaprakash, Y. M. & Sharma, S. S., 2021, In: Manufacturing Review. 8, 31.Research output: Contribution to journal › Review article › peer-review
Open Access -
2018
Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology
Mohan, N. S. & Kulkarni, S. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012031.Research output: Contribution to journal › Conference article › peer-review
5 Citations (Scopus) -
2019
Comparative assessment of three microimplant assisted biomechanical strategies for the simultaneous intrusion and retraction of anterior teeth in relation to alveolar bone stress and change in incisor inclinations – A 3D finite element analysis study
Bariar, A., Shetty, S., Desai, A. & Adhikari, R., 01-01-2019, In: Biomedical and Pharmacology Journal. 12, 2, p. 747-757 11 p.Research output: Contribution to journal › Article › peer-review
Open Access -
2009
Performance characteristics of a misaligned single pad externally adjustable fluid-film bearing
Shenoy, B. S. & Pai, R., 2009, In: Tribology in Industry. 31, 3-4, p. 29-36 8 p.Research output: Contribution to journal › Article › peer-review
5 Citations (Scopus) -
2010
Effect of machining parameters on surface roughness and material removal rate in finish turning of ±30° glass fibre reinforced polymer pipes
Kini, M. V. & Chincholkar, A. M., 01-08-2010, In: Materials and Design. 31, 7, p. 3590-3598 9 p.Research output: Contribution to journal › Article › peer-review
34 Citations (Scopus) -
2017
Melioidosis mimicking tubercular cold abscess
Kundangar, R. S., Bhat, S. N. & Mohanty, S. P., 01-01-2017, In: BMJ Case Reports. 2017, bcr-2017-221787.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
2013
Cervical spinal cord injuries without radiographic evidence of trauma: A prospective study
Mohanty, S. P., Bhat, N. S., Singh, K. A. & Bhushan, M., 01-11-2013, In: Spinal Cord. 51, 11, p. 815-818 4 p.Research output: Contribution to journal › Article › peer-review
12 Citations (Scopus) -
2018
Melioidosis: The great mimicker presenting as spondylodiscitis
Garg, R., Shaw, T., Bhat, S. N. & Mukhopadhyay, C., 01-01-2018, In: BMJ Case Reports. 2018, A220.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
Serum magnesium levels and its correlation with level of control in patients with asthma: A hospital-based, cross-sectional, prospective study
Daliparty, V., Manu, M. & Mohapatra, A., 01-09-2018, In: Lung India. 35, 5, p. 407-410 4 p.Research output: Contribution to journal › Review article › peer-review
1 Citation (Scopus) -
Efficient Similarity Measurement between Digitally Reconstructed Radiograph and Fluoroscopy for 3D-2D Registration
Chaitanya, B. H. R., Anitha, H., Shyamasunder, N. B. & Bhat, V., 30-11-2018, 2018 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2018. Institute of Electrical and Electronics Engineers Inc., p. 611-616 6 p. 8554401Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2017
Development of a miniature autofluorescence device for the early diagnosis of squamous cell carcinoma
Patil, A., Swati, R. K., Unnikrishnan, V. K., Keerthilatha, M. P., Kartha, V. B. & Chidangil, S., 01-01-2017, European Conference on Biomedical Optics, ECBO 2017. OSA - The Optical Society, (Optics InfoBase Conference Papers; vol. Part F61-ECBO 2017).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
A combined experimental and computational investigation of solvatochromism of nonpolar laser dyes: Evaluation of ground and singlet excited-state dipole moments
Pujar, G. H., Wari, M. N., Steffi, B., Varsha, H., Kavita, B., Yohannan Panicker, C., Santhosh, C., Patil, A. & Inamdar, S. R., 01-10-2017, In: Journal of Molecular Liquids. 244, p. 453-463 11 p.Research output: Contribution to journal › Article › peer-review
9 Citations (Scopus) -
2010
Protein profile analysis of cellular samples from the cervix for the objective diagnosis of cervical cancer using HPLC-LIF
Bhat, S., Patil, A., Rai, L., Kartha, V. B. & Santhosh, C., 01-12-2010, In: Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences. 878, 31, p. 3225-3230 6 p.Research output: Contribution to journal › Article › peer-review
14 Citations (Scopus) -
2011
Parameter optimization of a laser-induced fluorescence system for in vivo screening of oral cancer
Unnikrishnan, V. K., Nayak, R., Bernard, R., Priya, K. J., Patil, A., Ebenezer, J., Pai, K. M., George, S. D., Kartha, V. B. & Santhosh, C., 01-08-2011, In: Journal of Laser Applications. 23, 3, 032004.Research output: Contribution to journal › Article › peer-review
9 Citations (Scopus)