Find Research outputs

Search results

• 2005

  In reply: Pleomorphic adenoma with extensive necrosis report of two cases. Oral Diseases 2004; 10: 54-59

  Auluck, A. & Pai, K. M., 01-05-2005, In: Oral Diseases. 11, 3, 1 p.

  Research output: Contribution to journal › Letter › peer-review
• 2004

  Papillon Lefevre syndrome

  Thomas, S., Gummadapu, S., Ahsan, A. & Pai, K. M., 01-07-2004, In: Saudi Medical Journal. 25, 7, p. 941-943 3 p.

  Research output: Contribution to journal › Article › peer-review
• 2016

  Postradiation trismus and its impact on quality of life in patients with head and neck cancer: A commentary

  Bansal, D., Vineetha, R. & Pai, K. M., 01-02-2016, In: Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology. 121, 2, p. 196-197 2 p.

  Research output: Contribution to journal › Letter › peer-review
  1 Citation (Scopus)
• 2015

  Early diagnosis of tongue malignancy using laser induced fluorescence spectroscopy technique

  Patil, A., Unnikrishnan, V. K., Ongole, R., Pai, K. M., Kartha, V. B. & Chidangil, S., 01-01-2015, Clinical and Biomedical Spectroscopy and Imaging IV. SPIE, Vol. 9537. 95370J

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2022

  Effect of Maleic Acid Root Conditioning on Release of Transforming Growth Factor Beta 1 from Infected Root Canal Dentin

  Ballal, N. V., Narkedamalli, R., Ruparel, N. B., Shenoy, P. A., Bhat, V. R. & Belle, V. S., 05-2022, In: Journal of Endodontics. 48, 5, p. 620-624 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2015

  Evaluation of cytotoxicity of silorane and methacrylate based dental composites using human gingival fibroblasts

  Madhyastha, P. S., Naik, D. G., Kotian, R., Padma, D., Srikant, N. & Bhat, K. M. R., 01-01-2015, In: Journal of Clinical and Diagnostic Research. 9, 1, p. ZC05-ZC08

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2021

  Comparative evaluation of flexural strength of two newer composite resin materials: An in vitro study

  Patil, A., Acharya, S. R. & Ginjupalli, K., 2021, In: Pesquisa Brasileira em Odontopediatria e Clinica Integrada. 21, e0175.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2011

  Correlation of clinical patterns of oral squamous cell carcinoma with age, site, sex and habits

  Mathur, P. T., Dayal, P. K. & Pai, K. M., 2011, In: Journal of Indian Academy of Oral Medicine and Radiology. 23, 2, p. 81-85 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  11 Citations (Scopus)
• 2012

  Chemically modified tetracyclines: Novel therapeutic agents in the management of chronic periodontitis

  Agnihotri, R. & Gaur, S., 01-04-2012, In: Indian Journal of Pharmacology. 44, 2, p. 161-167 7 p.

  Research output: Contribution to journal › Review article › peer-review
  16 Citations (Scopus)

• An evaluation of shade differences between natural anterior teeth in different age groups and gender using commercially available shade guides

  Rodrigues, S., Shetty, S. R. & Prithviraj, D. R., 01-12-2012, In: Journal of Indian Prosthodontist Society. 12, 4, p. 222-230 9 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)
• 2017

  A comparative study of the quality of apical seal in resilon/epiphany se following intra canal irrigation with 17% EDTA, 10% citric acid, and mtad as final irrigants – A dye leakage study under vacuum

  Balasubramanian, S. K., Saraswathi, V., Ballal, N. V., Acharya, S. R., Sivakumar Sampath, J. & Singh, S., 01-02-2017, In: Journal of Clinical and Diagnostic Research. 11, 2, p. ZC20-ZC24

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2021

  Common risk factor approach to limit noncommunicable diseases and periodontal disease - The molecular and cellular basis: A narrative review

  Puzhankara, L. & Janakiram, C., 01-09-2021, In: Journal of International Society of Preventive and Community Dentistry. 11, 5, p. 490-502 13 p.

  Research output: Contribution to journal › Review article › peer-review
  1 Citation (Scopus)
• 2018

  Efficacy and safety of tetrahydrocurcuminoid in the treatment of oral leukoplakia: A pilot study

  Chhaparwal, Y., Pai, K. M., Kamath, M. S., Carnelio, S. & Chhaparwal, S., 01-12-2018, In: Asian Journal of Pharmaceutical and Clinical Research. 11, 12, p. 194-196 3 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2012

  Nanocrystalline hydroxyapatite bone graft combined with bioresorbable collagen membrane in the treatment of periodontal intrabony defects: A randomized controlled clinical trial

  Singh, V. P., Nayak, D. G., Uppoor, A. S. & Shah, D., 01-10-2012, In: Journal of Indian Society of Periodontology. 16, 4, p. 562-568 7 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• MRI evaluation of movement of the mandibular condyle and articular disk on application of an occlusal splint

  Sujir, N. & Pai, K. M., 01-01-2012, In: Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology. 113, 6, 1 p.

  Research output: Contribution to journal › Letter › peer-review
• 2010

  Remodeling of the antegonial angle region in the human mandible: A panoramic radiographic cross-sectional study

  Ghosh, S., Vengal, M., Pai, K. M. & Abhishek, K., 01-09-2010, In: Medicina Oral, Patologia Oral y Cirugia Bucal. 15, 5

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 2015

  Multidisciplinary approach for management of a patient with fibrous dysplasia of maxilla

  Eachempati, P., Aggarwal, H., Shenoy, V. & Baliga, M., 05-08-2015, In: BMJ Case Reports. 2015, 210330.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2017

  Potential role of natural compounds as anti-angiogenic agents in cancer

  Shanmugam, M. K., Warrier, S., Kumar, A. P., Sethi, G. & Arfuso, F., 01-11-2017, In: Current Vascular Pharmacology. 15, 6, p. 503-519 17 p.

  Research output: Contribution to journal › Review article › peer-review
  132 Citations (Scopus)

• Generation of an induced pluripotent stem cell line from chorionic villi of a Turner syndrome spontaneous abortion

  Parveen, S., Panicker, M. M. & Gupta, P. K., 01-03-2017, In: Stem Cell Research. 19, p. 12-16 5 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2020

  Keeping the country positive during the COVID 19 pandemic: Evidence from India

  Vibha, Prabhu, A. N., Kamath, G. B. & Pai, D. V., 06-2020, In: Asian Journal of Psychiatry. 51, 102118.

  Research output: Contribution to journal › Letter › peer-review
  9 Citations (Scopus)

• Recent advances in carbon-based polymer composites for effective electromagnetic interference (Emi) shielding

  Thimmappa, B. H. S., Karthik, A., Shivamurthy, B., Naik, N., Sharma, S. & Shetty, D. K., 10-04-2020, In: International Journal of Advanced Science and Technology. 29, 5, p. 6207-6234 28 p.

  Research output: Contribution to journal › Article › peer-review

• Effect of dome size on flow dynamics in saccular aneurysms -A numerical study

  Nayak, S., Kumar, N., Khader, S. M. A. & Pai, R., 2020, In: Journal of Mechanical Engineering and Sciences. 14, 3, p. 7181-7190 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2021

  Growth of relational model: Interdependence and complementary to big data

  Shetty, S., Dinesh Rao, B. & Prabhu, S., 04-2021, In: International Journal of Electrical and Computer Engineering. 11, 2, p. 1780-1795 16 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2011

  MONITORING PHYSIOLOGICAL DATA THROUGH WEARABLE ELECTRONICS

  Paresh, K. V., Chinthanippu, S. A., Jindal, A., Cheeroth, S. M., Ali, T. & Pathan, S., 2011, In: Telecommunications and Radio Engineering (English translation of Elektrosvyaz and Radiotekhnika). 80, 11, p. 13-22 10 p.

  Research output: Contribution to journal › Article › peer-review
• 2018

  Experimental validation of energy parameters in parabolic trough collector with plain absorber and analysis of heat transfer enhancement techniques

  Bilal, F. R., Arunachala, U. C. & Sandeep, H. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012030.

  Research output: Contribution to journal › Conference article › peer-review
  13 Citations (Scopus)
• 2013

  ANN based evaluation of performance of wavelet transform for condition monitoring of rolling element bearing

  Kumar, H. S., Srinivasa Pai, P., Sriram, N. S. & Vijay, G. S., 01-01-2013, In: Procedia Engineering. 64, p. 805-814 10 p.

  Research output: Contribution to journal › Conference article › peer-review
  43 Citations (Scopus)
• 2017

  Preface

  Pai, R., Shenoy, S. & Khader, A., 2017, In: Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 217-218 2 p.

  Research output: Contribution to journal › Editorial › peer-review
• 2019

  Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCI_p composites

  Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Emission control studies in homogeneous charge compression ignition, premixed charge compression ignition and common rail direct injection engines–a review

  Rahul Chowta, P., Murthy, K. & Mahesha, G. T., 01-01-2019, (Accepted/In press) In: Biofuels.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2018

  Effect of precipitation hardening on stir cast AL6061-B₄C reinforced composite

  Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

  Research output: Contribution to journal › Article › peer-review
• 2016

  Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2017

  Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

  Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2021

  Thermo-hydraulic performance prediction of a solar air heater with circular perforated absorber plate using Artificial Neural Network

  Shetty, S. P., Nayak, S., Kumar, S. & Vasudeva Karanth, K., 01-06-2021, In: Thermal Science and Engineering Progress. 23, 100886.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2018

  Low temperature machining of nitrile rubber

  Rajesh, N., Akshay, N. & Raviraj, S., 2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5500-5510 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)
• 2020

  Effect of chemical treatment on the physical and mechanical properties of flax fibers: A comparative assessment

  Nayak, S. Y., Shenoy Heckadka, S., Seth, A., Prabhu, S., Sharma, R. & Shenoy, K. R., 2020, In: Materials Today: Proceedings. 38, p. 2406-2410 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)
• 2016

  PIV study of mildly controlled flow over a wing model using a synthetic jet array

  Salunkhe, P. B., Tang, H. & Wu, Y., 2016, Symposia: Turbomachinery Flow Simulation and Optimization; Applications in CFD; Bio-Inspired and Bio-Medical Fluid Mechanics; CFD Verification and Validation; Development and Applications of Immersed Boundary Methods; DNS, LES and Hybrid RANS/LES Methods; Fluid Machinery; Fluid-Structure Interaction and Flow-Induced Noise in Industrial Applications; Flow Applications in Aerospace; Active Fluid Dynamics and Flow Control - Theory, Experiments and Implementation. American Society of Mechanical Engineers(ASME), (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1A-2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2021

  Comparison of conventional drilling and helical milling for hole making in Ti6Al4V titanium alloy under sustainable dry condition

  Akula, S., Nayak, S. N., Bolar, G. & Managuli, V., 2021, In: Manufacturing Review. 8, 12.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Combined influence of fuel injection strategy and nanoparticle additives on the performance and emission characteristics of a biodiesel fueled engine

  Kumar, S. & Dinesha, P., 2021, In: Cogent Engineering. 8, 1, 1939515.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2015

  Sino-Indian cooperation at the climate change negotiations: The past, the present and the future

  Jayaram, D., 01-01-2015, World Scientific Reference on Asia and the World Economy. World Scientific Publishing Co., p. 13-25 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
• 2021

  Investigation on the Performance of Order Release Methods in a Flow Shop with Bottlenecks

  Prabhu, A., Raghunandana, K. & Yogesh, P. P., 10-2021, In: Jordan Journal of Mechanical and Industrial Engineering. 15, 4, p. 377-385 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2012

  Numerical simulation of the electro-convective onset and complex flows of dielectric liquid in an annulus

  Fernandes, D. V., Lee, H. D., Alapati, S. & Suh, Y. K., 12-2012, In: Journal of Mechanical Science and Technology. 26, 12, p. 3785-3793 9 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)
• 2022

  Vickers micro-hardness variation during change in concentration of constituent elements in Ni_{50- x} Fe_x Mn₃₀Sn_{20- y} In_y,Heusler alloys

  S., S. N., B.r.n., M., S., S., A.a., P. & J., A. C., 2022, In: Manufacturing Review. 9, 4.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Moisture absorption and spectroscopic studies of epoxy clay nanocomposite

  Muralishwara, K., Sudhakar, Y. N., Kini, U. A., Sharma, S. & Gurumurthy, B. M., 2022, (Accepted/In press) In: Polymer Bulletin.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2010

  Total productive maintenance of a diesel power generating unit of a institution campus

  Shetty, P. K. & Rodrigues, L. L. R., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 68-71 4 p. 5598493

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  8 Citations (Scopus)
• 2016

  Computational simulation of blood flow in normal and diseased artery: A review

  Vinoth, R., Adhikari, R. & Kumar, D., 01-01-2016, In: Indian Journal of Science and Technology. 9, 15

  Research output: Contribution to journal › Review article › peer-review
  3 Citations (Scopus)
• 2021

  Martensitic transformation behavior and structural characteristics of annealed Ni-Mn-Sn-Fe-In heusler alloy

  Sandeep, S. N., Murthy, B. R. N., Sathyashankara, S. & Prasanna, A. A., 17-11-2021, In: Journal of Physics: Conference Series. 2070, 1, 012231.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
• 2010

  Numerical study on electrokinetic interaction between a pair of cylindrical colloidal particles

  Fernandes, D. V., Kang, S. & Suh, Y. K., 2010, Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2009, IMECE 2009. PART B ed. American Society of Mechanical Engineers(ASME), p. 583-588 6 p. (ASME International Mechanical Engineering Congress and Exposition, Proceedings; vol. 12, no. PART B).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2020

  Investigations on the dependence of the stability threshold on different operating procedures in a single-phase rectangular natural circulation loop

  Elton, D. N., Arunachala, U. C. & Vijayan, P. K., 11-2020, In: International Journal of Heat and Mass Transfer. 161, 120264.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• A systematic review for the use of the SERVQUAL model in banks in India

  Perule, N., Shetty, D. K., Naik, N., Maddodi, B. S., Malarout, N. & Jain, M., 09-04-2020, Test Engineering and Management, 83, p. 8604-8620 17 p.

  Research output: Contribution to specialist publication › Article
• 2021

  Phenomenological model of urea water solution dosage strategy for urea-selective catalytic reduction systems

  Sadashiva Prabhu, S., Nayak, N. S. & Natesan, K., 01-10-2021, In: Rasayan Journal of Chemistry. 14, 4, p. 2486-2498 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access