Find Research outputs

Search results

• 2021

  Effects of thermal treatments on characteristics and morphological variations in the deposits of urea-SCR systems

  Prabhu S, S., Natesan, K. & Nayak, N. S., 2021, In: Environmental Science and Pollution Research.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Multicast tree construction algorithm for dynamic traffic on software defined networks

  Bijur, G., Ramakrishna, M. & Kotegar, K. A., 12-2021, In: Scientific Reports. 11, 1, 23084.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2015

  A novel approach to investigate effect of magnetic field on dynamic properties of natural rubber based isotropic thick magnetorheological elastomers in shear mode

  Hegde, S., Kiran, K. & Gangadharan, K. V., 24-07-2015, In: Journal of Central South University. 22, 7, p. 2612-2619 8 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)
• 2017

  Investigation on tapping of al6061-sic metal matrix composite with HSS taps

  Paious, M., Adhikari, R. & Nagaraja, 01-07-2017, In: Pertanika Journal of Science and Technology. 25, 3, p. 949-962 14 p.

  Research output: Contribution to journal › Article › peer-review
• 2021

  Effect of microstructure, phase formation on the mechanical and surface characteristics of low alloy medium carbon forged steels – A review

  Hiremath, P., Gowrishankar, M. C., Shettar, M., Sharma, S., Prabhu, P. R. & Kumar, N., 2021, In: International Review of Mechanical Engineering. 15, 6, p. 325-334 10 p.

  Research output: Contribution to journal › Review article › peer-review
• 2008

  Use of immersed boundary method for the analysis of electro-osmotic flow generated by a pair of cylindrical electrodes in a micro-cavity

  Fernandes, D. V., Suh, Y. K. & Kang, S., 2008, 2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008. p. 187-192 6 p. (2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008; vol. PART A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2021

  Experimental investigation on use of alternative innovative materials for sustainable cooling applications

  Suranjan Salins, S., Reddy, S. V. K. & Kumar, S., 2021, (Accepted/In press) In: International Journal of Sustainable Engineering.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Effect of austempering temperature and manganese content on the impact energy of austempered ductile iron

  Hegde, A., Gurumurthy, B. M., Hindi, J., Sharma, S. & Gowrishankar, M. C., 2021, In: Cogent Engineering. 8, 1, 1939928.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)
• 2018

  A Pragmatic Optimization of Axial Stack-Radial Passive Magnetic Bearings

  Lijesh, K. P., Doddamani, M. & Bekinal, S. I., 01-03-2018, In: Journal of Tribology. 140, 2, 021901.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)
• 2020

  Influence of wear parameters on the tribological characteristics of jute/e-glass epoxy hybrid composites of different weave architecture

  Shenoy Heckadka, S., Nayak, S. Y., Samant, R., Malik, A. & Aurichelle Magne Kam, V., 2020, In: Materials Today: Proceedings. 47, p. 6776-6782 7 p.

  Research output: Contribution to journal › Conference article › peer-review
• 2018

  Case study on water based cellulose couplant in contact type ultrasonic testing

  Shivamurthy, B., Krishnamurthy & Sachidanada, H. K., 09-01-2018, In: MATEC Web of Conferences. 144, 02016.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
• 2020

  A Novel Arrangement of Rectangular Fins for the Enhancement of Heat Transfer in a Rectangular Duct

  Fernandes, D. V., Parija, S. & Khinchi, D. S., 2020, Recent Asian Research on Thermal and Fluid Sciences - Proceedings of AJWTF7 2018. Suryan, A., Doh, D. H., Yaga, M. & Zhang, G. (eds.). Springer Gabler, p. 59-69 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2015

  Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

  Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and modelling of hemispherical and flat dish end pressure vessel

  Poojary, A. T., Sharma, R. S., Patel, M. H., Sheth, D. U., Kini, C. R. & Nayak, R., 2015, In: Indian Journal of Science and Technology. 8, 33

  Research output: Contribution to journal › Article › peer-review
• 2017

  Rolling element bearing fault diagnostics: Development of health index

  Kumar, H. S., Pai, S. P., Sriram, N. S. & Vijay, G. S., 01-11-2017, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 231, 21, p. 3923-3939 17 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 2018

  Parabolic trough solar collector for medium temperature applications: An experimental analysis of the efficiency and length optimization by using inserts

  Elton, D. N. & Arunachala, U. C., 01-12-2018, In: Journal of Solar Energy Engineering, Transactions of the ASME. 140, 6, 061012.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• The effect of Process Parameters on Material Removal Rate in Drilling of Al 6061-SiC composite

  Deepak, D. & Rajendra, B., 09-01-2018, In: MATEC Web of Conferences. 144, 03009.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)
• 2020

  Dynamic characteristics of drilling spindle supported by radial permanent magnet bearings

  Chalageri, G. R., Bekinal, S. I. & Doddamani, M., 13-05-2020, In: Materials Today: Proceedings. 28, p. 2190-2196 7 p.

  Research output: Contribution to journal › Conference article › peer-review
• 2018

  Numerical study of the influence of design parameters on heat transfer in a helically coiled heat exchanger

  Kumar, S. & Dinesha, P., 01-01-2018, In: Heat Transfer Research. 49, 15, p. 1431-1443 13 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 1992

  Stability of submerged four-lobe oil journal bearings under dynamic load

  Pai, R. & Majumdar, B. C., 15-04-1992, In: Wear. 154, 1, p. 95-108 14 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)
• 2019

  Evaluation of physico-mechanical characteristics of cashew nut shell liquid-epoxy composites with Borassus and Tamarind fruit fibres as reinforcements

  Nayak, S. Y., Shenoy Heckadka, S. & Thomas, L. G., 03-04-2019, In: Journal of Natural Fibers. 16, 3, p. 328-341 14 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)
• 2020

  Theoretical investigation of the effect of offset loads on the static characteristics of a multi-pad adjustable bearing geometry

  Girish, H. & Pai, R., 2020, (Accepted/In press) In: Australian Journal of Mechanical Engineering.

  Research output: Contribution to journal › Article › peer-review

• Multiple data cost-based stereo matching method to generate dense disparity maps from images under radiometric variations

  Shetty, A. A., George, V. I., Gurudas Nayak, C. & Shetty, R., 2020, In: International Journal of Intelligent Systems Technologies and Applications. 19, 4, p. 405-420 16 p.

  Research output: Contribution to journal › Article › peer-review
• 1992

  Theoretical analysis on conical whirl instability of unloaded submerged oil journal bearings

  Pai, R. & Majumdar, B. C., 31-01-1992, In: Wear. 152, 2, p. 309-316 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2019

  Studies on mild steel particulates reinforced duralumin composite fabricated through powder metallurgy route

  Shivaprakash, Y. M., Gurumurthy, B. M., Siddhartha, M. A., Siddesh Kumar, N. M. & Dutta, A., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 903-920 18 p., IJMPERDAPR201988.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)
• 2021

  Effect of alkali treatment on physical and mechanical properties of bamboo short fibers

  Nayak, S. Y., Shenoy, K. R., Samant, R., Sarvade, P. P., Shenoy B, S., Bin Hameed Sultan, M. T. & Kini, C. R., 2021, In: Journal of Computational Methods in Sciences and Engineering. 21, 3, p. 535-543 9 p.

  Research output: Contribution to journal › Article › peer-review
• 2015

  Fabrication & performance analysis of mesoscopic dye sensitized solar cells

  Hiremath, A. & Arunkumar, H. S., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 21, p. 42783-42788 6 p.

  Research output: Contribution to journal › Article › peer-review
• 2017

  A computational fluid dynamics study of combustion and emission performance in an annular combustor of a jet engine

  Zuber, M., Hisham, M. S. B., Nasir, N. A. M., Basri, A. A. & Khader, S. M. A., 01-07-2017, In: Pertanika Journal of Science and Technology. 25, 3, p. 1019-1028 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2016

  Preparation of Unidirectional Grewia Serrulata Fiber-Reinforced Polyester Composites and Evaluation of Tensile and Flexural Properties

  Mahesha, G. T., Satish, S. B., Vijaya, K. M. & Bhat, K. S., 02-09-2016, In: Journal of Natural Fibers. 13, 5, p. 547-554 8 p.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)
• 2007

  Insurance sector dynamics: Towards transformation into learning organization

  Barkur, G., Varambally, K. V. M. & Rodrigues, L. L. R., 03-10-2007, In: Learning Organization. 14, 6, p. 510-523 14 p.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)
• 2005

  Cybernetics of engineering competence-pool development & deployment: Simulation based implications

  Rodrigues, L. L. R. & Martis, M. S., 01-01-2005, 3rd International Conference on Education and Information Systems: Technologies and Applications, EISTA 2005, Proceedings. International Institute of Informatics and Systemics, IIIS, Vol. 1. p. 138-143 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2018

  Inhibiting action of N-Napthyl-Nl-Phenyl thiourea on the corrosion of 304 Ss In HCL medium

  Shetty, N. & Herle, R., 01-02-2018, In: International Journal of Civil Engineering and Technology. 9, 2, p. 507-515 9 p.

  Research output: Contribution to journal › Article › peer-review

• Hemodynamics of Idealized Carotid Artery

  Puritipati, C., Keri, V. & Kumar, N., 09-01-2018, In: MATEC Web of Conferences. 144, 01020.

  Research output: Contribution to journal › Conference article › peer-review

• Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

  Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2019

  Heat Transfer Augmentation Using an Innovative Helicoidal Finned Absorber Plate in a Solar Air Heater-A Numerical Study

  Purohit, S., Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-06-2019, In: Journal of Solar Energy Engineering, Transactions of the ASME. 141, 3, 031016.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2010

  The effect of fuel volatility on droplet depletion rate and penetration of vaporizing fuel droplets in a gas turbine combustor

  Sharma, N. Y., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 82-86 5 p. 5598498

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2021

  Effects of particle size of cerium oxide nanoparticles on the combustion behavior and exhaust emissions of a diesel engine powered by biodiesel/diesel blend

  Dinesha, P., Kumar, S. & Rosen, M. A., 2021, In: Biofuel Research Journal. 8, 2, p. 1374-1383 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  11 Citations (Scopus)
• 2020

  Cone beam computed tomography for mechanical characterization of Flax/Jute/Ultra high molecular weight polyethylene reinforced phenol formaldehyde composites: A comparative assessment

  Shenoy Heckadka, S., Pai Ballambat, R., Kini Manjeshwar, V., Ravindranath, V., Hegde, P. & Kamath, A., 2020, In: Materials Today: Proceedings. 47, p. 6740-6745 6 p.

  Research output: Contribution to journal › Conference article › peer-review
• 2016

  Effect of process parameters on the surface roughness generated on graphite laced GFRP composite by AWJ machining

  Doreswamy, D., Eqbal, B., Sangolagi, S. & Devineni, A., 01-01-2016, In: International Journal of Abrasive Technology. 7, 4, p. 294-306 13 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2017

  Experimental evaluation of the chill casting method for the fabrication of LM-25 aluminum alloy-borosilicate glass (p) composites

  Hiremath, A. & Hemanth, J., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 69-73 5 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Experimental evaluation of the coefficient of thermal expansion of chilled aluminum alloy-borosilicate glass (P) composite

  Hiremath, A. & Hemanth, J., 01-01-2017, In: Journal of Materials and Environmental Science. 8, 12, p. 4246-4252 7 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2020

  Study on effect of water soaking conditions on properties and morphology of glass fiber-cement-polyester composites

  Shettara, M., Shettigara, P., Manjunathb, M. & Rao, U. S., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8697-8704 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)
• 2019

  An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  10 Citations (Scopus)
• 2020

  Influence of diethyl ether on the performance and emissions of a compression ignition engine fuelled with biodiesel

  Kapilan, N., Sadashiva Prabhu, S. & Vasudeva, M., 2020, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 74, 1, p. 45-56 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2018

  Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

  Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)
• 2017

  Characterization of Laser Remelted Plasma-Sprayed Mo Coating on AISI 1020 Steel

  Manjunatha, S. S., Manjaiah, M. & Basavarajappa, S., 01-09-2017, In: Silicon. 9, 5, p. 741-751 11 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2022

  Finite element study on the influence of fiber orientation on the high velocity impact behavior of fiber reinforced polymer composites

  Stephen, C., Behara, S. R., Shivamurthy, B., Selvam, R., Kannan, S. & Abbadi, M., 06-2022, In: International Journal on Interactive Design and Manufacturing. 16, 2, p. 459-468 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2019

  Generalized optimization procedure for rotational magnetized direction permanent magnet thrust bearing configuration

  Bekinal, S. I., Doddamani, M., Vanarotti, M. & Jana, S., 01-04-2019, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233, 7, p. 2563-2573 11 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)
• 2021

  Micro-hardness variation of micro-phases during spheroidisation of AISI4340 steel

  Harisha, S. R., Sharma, S., Kini, A. U., Gurumurty, B. M. & Hegde, A., 2021, In: Cogent Engineering. 8, 1, 1875536.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Cryogenic machining of elastomers: a review

  Maurya, P., Vijay, G. S., Raghavendra Kamath, C. & Shivamurthy, B., 2021, (Accepted/In press) In: Machining Science and Technology.

  Research output: Contribution to journal › Review article › peer-review
  1 Citation (Scopus)