Find Research outputs

Search results

• 2022

  Improved structural and optical behaviour of InAs Stranski-Krastanov (SK) quantum dot heterostructures using analog, digital, and linear alloy techniques

  Kumar, A., Prabhu, S., Kumar, R. & Chakrabarti, S., 2022, Physics and Simulation of Optoelectronic Devices XXX. Witzigmann, B., Osinski, M. & Arakawa, Y. (eds.). SPIE, 119950L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11995).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2020

  Design and Fabrication of Low-cost Microfluidic Channel for Biomedical Application

  Tiwari, S. K., Bhat, S. & Mahato, K. K., 01-12-2020, In: Scientific Reports. 10, 1, 9215.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  9 Citations (Scopus)

• Health sector spending and spending on HIV/AIDS, tuberculosis, and malaria, and development assistance for health: progress towards Sustainable Development Goal 3

  Micah, A. E., Su, Y., Bachmeier, S. D., Chapin, A., Cogswell, I. E., Crosby, S. W., Cunningham, B., Harle, A. C., Maddison, E. R., Moitra, M., Sahu, M., Schneider, M. T., Simpson, K. E., Stutzman, H. N., Tsakalos, G., Zende, R. R., Zlavog, B. S., Abbafati, C., Abebo, Z. H., Abolhassani, H. & 230 others, Abrigo, M. R. M., Ahmed, M. B., Akinyemi, R. O., Alam, K., Ali, S., Alinia, C., Alipour, V., Aljunid, S. M., Almasi, A., Alvis-Guzman, N., Ancuceanu, R., Andrei, T., Andrei, C. L., Anjomshoa, M., Antonio, C. A. T., Arabloo, J., Arab-Zozani, M., Aremu, O., Atnafu, D. D., Ausloos, M., Avila-Burgos, L., Ayanore, M. A., Azari, S., Babalola, T. K., Bagherzadeh, M., Baig, A. A., Bakhtiari, A., Banach, M., Banerjee, S. K., Bärnighausen, T. W., Basu, S., Baune, B. T., Bayati, M., Berman, A. E., Bhageerathy, R., Bhardwaj, P., Bohluli, M., Busse, R., Cahuana-Hurtado, L., Cámera, L. LA. A., Castañeda-Orjuela, C. A., Catalá-López, F., Cevik, M., Chattu, V. K., Dandona, L., Dandona, R., Dianatinasab, M., Do, H. T., Doshmangir, L., El Tantawi, M., Eskandarieh, S., Esmaeilzadeh, F., Faraj, A., Farzadfar, F., Fischer, F., Foigt, N. A., Fullman, N., Gad, M. M., Ghafourifard, M., Ghashghaee, A., Gholamian, A., Goharinezhad, S., Grada, A., Haghparast Bidgoli, H., Hamidi, S., Harb, H. L., Hasanpoor, E., Hay, S. I., Hendrie, D., Henry, N. J., Herteliu, C., Hole, M. K., Hosseinzadeh, M., Hostiuc, S., Huda, T. M., Humayun, A., Hwang, B. F., Ilesanmi, O. S., Iqbal, U., Irvani, S. S. N., Islam, S. M. S., Islam, M. M., Jahani, M. A., Jakovljevic, M., James, S. L., Javaheri, Z., Jonas, J. B., Joukar, F., Jozwiak, J. J., Jürisson, M., Kalhor, R., Karami Matin, B., Karimi, S. E., Kayode, G. A., Kazemi Karyani, A., Kinfu, Y., Kisa, A., Kohler, S., Komaki, H., Kosen, S., Kotlo, A., Koyanagi, A., Kumar, G. A., Kusuma, D., Lansingh, V. C., Larsson, A. O., Lasrado, S., Lee, S. W. H., Lim, L. L., Lozano, R., Magdy Abd El Razek, H., Mahdavi, M. M., Maleki, S., Malekzadeh, R., Mansour-Ghanaei, F., Mansournia, M. A., Mantovani, L. G., Martinez, G., Masoumi, S. Z., Massenburg, B. B., Menezes, R. G., Mengesha, E. W., Meretoja, T. J., Meretoja, A., Mestrovic, T., Milevska Kostova, N., Miller, T. R., Mirica, A., Mirrakhimov, E. M., Moghadaszadeh, M., Mohajer, B., Mohamadi, E., Mohammad Darwesh, A., Mohammadian-Hafshejani, A., Mohammadpourhodki, R., Mohammed, S., Mohebi, F., Mokdad, A. H., Morrison, S. D., Mosser, J. F., Mousavi, S. M., Muriithi, M. K., Muthupandian, S., Myint, C. Y., Naderi, M., Nagarajan, A. J., Nguyen, C. T., Nguyen, H. L. T., Nonvignon, J., Noubiap, J. J., Oh, I. H., Olagunju, A. T., Olusanya, J. O., Olusanya, B. O., Omar Bali, A., Onwujekwe, O. E., Otstavnov, S. S., Otstavnov, N., Owolabi, M. O., Padubidri, J. R., Palladino, R., Panda-Jonas, S., Pandey, A., Postma, M. J., Prada, S. I., Pribadi, D. R. A., Rabiee, M., Rabiee, N., Rahim, F., Ranabhat, C. L., Rao, S. J., Rathi, P., Rawaf, S., Rawaf, D. L., Rawal, L., Rawassizadeh, R., Rezapour, A., Sabour, S., Sahraian, M. A., Salman, O. M., Salomon, J. A., Samy, A. M., Sanabria, J., Santos, J. V., Santric Milicevic, M. M., Sao Jose, B. P., Savic, M., Schwendicke, F., Senthilkumaran, S., Sepanlou, S. G., Serván-Mori, E., Setayesh, H., Shaikh, M. A., Sheikh, A., Shibuya, K., Shrime, M. G., Simonetti, B., Singh, J. A., Singh, P., Skryabin, V. Y., Soheili, A., Soltani, S., Ștefan, S. C., Tabarés-Seisdedos, R., Topor-Madry, R., Tovani-Palone, M. R., Tran, B. X., Travillian, R., Undurraga, E. A., Valdez, P. R., van Boven, J. F. M., Vasankari, T. J., Violante, F. S., Vlassov, V., Vos, T., Wolfe, C. D. A., Wu, J., Yaya, S., Yazdi-Feyzabadi, V., Yip, P., Yonemoto, N., Younis, M. Z., Yu, C., Zaidi, Z., Zaman, S. B., Zastrozhin, M. S., Zhang, Z. J., Zhao, Y., Murray, C. J. L. & Dieleman, J. L., 05-09-2020, In: The Lancet. 396, 10252, p. 693-724 32 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  36 Citations (Scopus)
• 2019

  Cuk Converter as an Efficient Driver for LED

  Surya, S. & Patil, V., 12-2019, 4th International Conference on Electrical, Electronics, Communication, Computer Technologies and Optimization Techniques, ICEECCOT 2019. Institute of Electrical and Electronics Engineers Inc., p. 49-52 4 p. 9114648. (4th International Conference on Electrical, Electronics, Communication, Computer Technologies and Optimization Techniques, ICEECCOT 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  6 Citations (Scopus)
• 2018

  Neural stem cell derived extracellular vesicles: Attributes and prospects for treating neurodegenerative disorders

  Vogel, A., Upadhya, R. & Shetty, A. K., 12-2018, In: EBioMedicine. 38, p. 273-282 10 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  68 Citations (Scopus)
• 2020

  Phenotypic diversity and genetic complexity of PAX3-related Waardenburg syndrome

  Somashekar, P. H., Upadhyai, P., Narayanan, D. L., Kamath, N., Bajaj, S., Girisha, K. M. & Shukla, A., 01-12-2020, In: American Journal of Medical Genetics, Part A.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Computer-aided diagnosis of liver lesions using CT images: A systematic review

  Nayantara, P. V., Kamath, S., Manjunath, K. N. & Rajagopal, K. V., 12-2020, In: Computers in Biology and Medicine. 127, 104035.

  Research output: Contribution to journal › Review article › peer-review
  7 Citations (Scopus)

• Palliative and End of Life Care in India - Current Scenario and the Way Forward

  Bag, S., Mohanty, S., Deep, N., Salins, N. & Bag, S., 01-11-2020, In: The Journal of the Association of Physicians of India. 68, 11, p. 61-65 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2021

  Photodynamic therapy to control microbial biofilms

  Warrier, A., Mazumder, N., Prabhu, S., Satyamoorthy, K. & Murali, T. S., 01-03-2021, In: Photodiagnosis and Photodynamic Therapy. 102090.

  Research output: Contribution to journal › Review article › peer-review
  19 Citations (Scopus)
• 2020

  Berberine, a natural alkaloid sensitizes human hepatocarcinoma to ionizing radiation by blocking autophagy and cell cycle arrest resulting in senescence

  Ramesh, G., Das, S. & Bola Sadashiva, S. R., 01-12-2020, In: Journal of Pharmacy and Pharmacology. 72, 12, p. 1893-1908 16 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Behavioral aspects of solid waste management: A systematic review

  Raghu, S. J. & Rodrigues, L. L. R., 2020, In: Journal of the Air and Waste Management Association.

  Research output: Contribution to journal › Review article › peer-review
  4 Citations (Scopus)
• 2009

  Load bearing ability of interference-fitted assemblies: A roundness profile analysis

  Sogalad, I. & Udupa, N. G. S., 01-07-2009, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 223, 7, p. 1623-1632 10 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2015

  Effect of oxygen enrichment of intake air on the performance and emission of single cylinder CI engine fueled with cardanol blends

  Dinesha, P. & Mohanan, P., 01-01-2015, In: Distributed Generation and Alternative Energy Journal. 30, 1, p. 6-14 9 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 1994

  Periumbilical perforating Pseudoxanthoma elasticum

  Pai, R. R., Lobo, F. D. & Muralidhar, S., 01-01-1994, In: Indian Journal of Dermatology, Venereology and Leprology. 60, 1, p. 51-53 3 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2010

  Stability charateristics of a tri-taper journal bearing: A linearized perturbation approach

  Pai, R. S., Rao, D. S., Shenoy, B. S. & Pai, R. S., 2010, 1st International Brazilian Conference on Tribology, TriboBR-2010 and ITS - IFToMM 2010 - 2nd International Tribology Symposium of IFToMM. p. 336-349 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2011

  Effect of hypotension in stenosed common carotid artery A FSI study

  Pai, B. R., Khader, S. M. A., Ayachit, A., Rao, V. R. K. & Kamath, S. G., 29-09-2011, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. p. 269-272 4 p. 6014894

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2021

  Effects of solid lubricant fillers on the flexural and shear strength response of carbon fabric-epoxy composites

  Rao, Y. S., Mohan, N. S., Shetty, N. & Shivamurthy, B., 04-2021, In: Polymer Testing. 96, 107085.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Experimental analysis of thermoelectric heat exchanger powered by solar energy

  Shetty, S. P., Abishek, K., Pramodh, K., Madhwesh, N. & Karanth, K. V., 15-01-2021, In: Energy Conversion and Management. 228, 113687.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2020

  A review on Thermo mechanical behaviour of hybrid NF composites

  Loganathan, T. G., Sathish, R., Sreekandan, D. & Thamizhanban, S., 01-01-2020, In: Materials Today: Proceedings. 33, p. 995-1000 6 p.

  Research output: Contribution to journal › Conference article › peer-review
  1 Citation (Scopus)
• 2022

  Fractional-order viscoelastic modeling of the magnetic field dependent transmissibility response of MRE isolator

  Kiran, K., Poojary, U. R. & Gangadharan, K. V., 2022, (Accepted/In press) In: Journal of Intelligent Material Systems and Structures.

  Research output: Contribution to journal › Article › peer-review
• 2017

  Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review
  18 Citations (Scopus)
• 2012

  Experimental investigation of the effect of process parameters on machining of GFRP composites using Abrasive Water Suspension Jet submerged in water

  Deepak, D. & Devineni, A., 01-12-2012, BHR Group - 21st International Conference on Water Jetting: Looking to the Future, Learning from the Past. p. 25-33 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2014

  Experimental analysis of cardanol biofuel as an alternative fuel for diesel engines with air-side oxygen enrichment

  Dinesha, P., Nayak, V., Kumar, D. & Mohanan, P., 01-01-2014, Dynamics of Machines and Mechanisms, Industrial Research. Trans Tech Publications Ltd, p. 1549-1553 5 p. (Applied Mechanics and Materials; vol. 592-594).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)
• 2010

  The inhibition action of ethyl-2-phenyl hydrozono-3-oxobutyrate on the corrosion of 6061 Al alloy/SiCp composite in hydrochloric acid medium

  Kini, U. A., Shetty, P., Shetty, S. D., Isloor, A. & Herle, R., 01-01-2010, In: Journal of the Chilean Chemical Society. 55, 1, p. 56-60 5 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)
• 2017

  Numerical analysis of helical grooved channels near the leading edge region in gas turbine blade

  Kini, C. R., Mendonca, R. M., Yalamarty, S. S., Kamat, H. & Satish Shenoy, B., 01-01-2017, In: International Review of Mechanical Engineering. 11, 3, p. 161-166 6 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2019

  A review on metallic dental materials and its fabrication techniques

  Gupta, T., Shetty, S., Shetty, N. & Divakara Shetty, S., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 491-510 20 p., IJMPERDOCT201943.

  Research output: Contribution to journal › Article › peer-review
• 2021

  Simulation and Experimental Validation of Combustion Characteristics of Dual Fuel LPG-Diesel Engine

  Kumar, S., Srinivas, V. G., Murthy, K. & Sudheer, M. S., 12-2021, In: International Journal of Heat and Technology. 39, 6, p. 1937-1944 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Effect of microstructure, phase formation on the mechanical and surface characteristics of low alloy medium carbon forged steels – A review

  Hiremath, P., Gowrishankar, M. C., Shettar, M., Sharma, S., Prabhu, P. R. & Kumar, N., 2021, In: International Review of Mechanical Engineering. 15, 6, p. 325-334 10 p.

  Research output: Contribution to journal › Review article › peer-review
• 2011

  Numerical simulation of the electrophoretic transport of a biopolymer through a synthetic nano-pore

  Alapati, S., Fernandes, D. V. & Suh, Y. K., 05-2011, In: Molecular Simulation. 37, 6, p. 466-477 12 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)
• 2021

  Numerical investigation of human knee joint for understanding the influence of anterior cruciate ligament on the displacement and stress

  Bhat, B. K., Adhikari, R. & Acharya, K. K. V., 2021, In: International Journal of Bioinformatics Research and Applications. 17, 5, p. 391-405 15 p.

  Research output: Contribution to journal › Article › peer-review

• Experimental investigations and empirical relationship on the influence of innovative hub geometry in a centrifugal fan for performance augmentation

  Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 12-2021, In: International Journal of Mechanical and Materials Engineering. 16, 1, 5.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2019

  Optimisation of wire-edm process parameters for achieving low surface roughness in machining of is 5986 fe 410 steel and regression modelling

  Deepak, D. & Rajendra, B., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 6, p. 399-410 12 p., IJMPERDDEC201934.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2018

  Effect of fiber treatments on mechanical properties of Grewia serrulata bast fiber reinforced polyester composites

  Mahesha, G. T., Shenoy, S. B., Kini, V. M. & Padmaraja, N. H., 01-01-2018, In: Materials Today: Proceedings. 5, 1, p. 138-144 7 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)
• 2017

  Investigating the inhibiting action of thiourea derivative on mild steel corrosion in acid medium

  Divakara Shetty, S., Shetty, N., Parvaz, F., Agnihotri, K. & Mewawala, P., 01-01-2017, In: International Journal of Applied Engineering Research. 12, 12, p. 3237-3242 6 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Fatigue life prediction of aluminum alloy 6061-T6 using continuum damage mechanics

  Kamath, T. R., Upadhyaya, Y. S. & Kaushik, D., 01-03-2017, In: Advanced Science Letters. 23, 3, p. 1914-1916 3 p.

  Research output: Contribution to journal › Article › peer-review
• 2018

  Study of a supply chain system with the presence of bullwhip effect

  Shrivastava, A., Kamath, R., Sharma, H. & Gogoi, A., 09-01-2018, In: MATEC Web of Conferences. 144, 05003.

  Research output: Contribution to journal › Conference article › peer-review

• Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

  Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Optimization of Microbial Leaching of Base Metals from a South African Sulfidic Nickel Ore Concentrate by Acidithiobacillus ferrooxidans

  Behera, S. K., Manjaiah, M., Sekar, S., Panda, S. K., Mavumengwana, V. & Mulaba-Bafubiandi, A. F., 03-07-2018, In: Geomicrobiology Journal. 35, 6, p. 447-459 13 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2020

  Surface topographical studies of glass fiber reinforced epoxy-ZnO nanocomposites

  Thipperudrappa, S., Kini, A. U., Hiremath, A. & Kumar, K. D., 01-01-2020, In: Materials Research Express. 7, 1, 015304.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Influence of stepped cylindrical turbulence generators on the thermal enhancement factor of a flat plate solar air heater

  Antony, A. L., Shetty, S. P., Madhwesh, N., Yagnesh Sharma, N. & Vasudeva Karanth, K., 01-03-2020, In: Solar Energy. 198, p. 295-310 16 p.

  Research output: Contribution to journal › Article › peer-review
  24 Citations (Scopus)
• 2010

  Scaling effect of direct solar hot water systems on energy efficiency

  Arunachala, U. C., Bhatt, M. S. & Sreepathi, L. K., 01-12-2010, In: Journal of Solar Energy Engineering, Transactions of the ASME. 132, 4, 041012.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2018

  Machinability study of manganese alloyed austempered ductile iron

  Hegde, A. & Sharma, S., 01-07-2018, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40, 7, 338.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2019

  Modeling and optimization of tannase production with Triphala in packed bed reactor by response surface methodology, genetic algorithm, and artificial neural network

  Selvaraj, S., Vytla, R. M., Vijay, G. S. & Natarajan, K., 01-07-2019, In: 3 Biotech. 9, 7, 259.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

  Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In: Materials Research Express. 6, 8, 082007.

  Research output: Contribution to journal › Review article › peer-review
  12 Citations (Scopus)
• 2018

  Case study on water based cellulose couplant in contact type ultrasonic testing

  Shivamurthy, B., Krishnamurthy & Sachidanada, H. K., 09-01-2018, In: MATEC Web of Conferences. 144, 02016.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
• 2020

  A Novel Arrangement of Rectangular Fins for the Enhancement of Heat Transfer in a Rectangular Duct

  Fernandes, D. V., Parija, S. & Khinchi, D. S., 2020, Recent Asian Research on Thermal and Fluid Sciences - Proceedings of AJWTF7 2018. Suryan, A., Doh, D. H., Yaga, M. & Zhang, G. (eds.). Springer Gabler, p. 59-69 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2008

  Use of immersed boundary method for the analysis of electro-osmotic flow generated by a pair of cylindrical electrodes in a micro-cavity

  Fernandes, D. V., Suh, Y. K. & Kang, S., 2008, 2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008. p. 187-192 6 p. (2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008; vol. PART A).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2015

  Design and modelling of hemispherical and flat dish end pressure vessel

  Poojary, A. T., Sharma, R. S., Patel, M. H., Sheth, D. U., Kini, C. R. & Nayak, R., 2015, In: Indian Journal of Science and Technology. 8, 33

  Research output: Contribution to journal › Article › peer-review
• 2017

  Rolling element bearing fault diagnostics: Development of health index

  Kumar, H. S., Pai, S. P., Sriram, N. S. & Vijay, G. S., 01-11-2017, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 231, 21, p. 3923-3939 17 p.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)
• 2018

  Parabolic trough solar collector for medium temperature applications: An experimental analysis of the efficiency and length optimization by using inserts

  Elton, D. N. & Arunachala, U. C., 01-12-2018, In: Journal of Solar Energy Engineering, Transactions of the ASME. 140, 6, 061012.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)