Find Research Outputs

Search concepts
Selected filters
2017
1 Citation (Scopus)

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon Dioxide
Aging of materials
Silica
silicon dioxide
composite materials
2015
1 Citation (Scopus)

Production, testing and microstructural investigation on fly ash reinforced aluminium alloy matrix composite

Shivaprakash, Y. M., Gurumurthy, B. M., Sharma, S. S., Jayashree, P. K. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 20, p. 41583-41590 8 p.

Research output: Contribution to journalArticle

Fly ash
Aluminum alloys
Composite materials
Testing
Precipitates
2010

Thermal treatments & characteristics study on unalloyed structural (AISI 1140) steel

Sharma, S. S., Prabhu, P. R. & Chadaga, R., 01-12-2010, In : World Academy of Science, Engineering and Technology. 46, p. 769-774 6 p.

Research output: Contribution to journalArticle

Heat treatment
Steel
Ductility
Hardness
Tempering
2017

Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

experiment design
Design of experiments
Age hardening
hardness
Aging of materials
2015
1 Citation (Scopus)

Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy

Gowri Shankar, M. C., Achutha Kini, U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 18-24 7 p.

Research output: Contribution to journalArticle

Age hardening
Reinforcement
Aging of materials
Precipitates
Composite materials
2016
2 Citations (Scopus)

Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In : International Journal of Technology. 7, 6, p. 1000-1008 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Composite materials
Metals
Wear resistance
2018
2 Citations (Scopus)

Tensile fractography of artificially aged Al6061-B4C composites

Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In : Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

Research output: Contribution to journalArticle

Fractography
Aging of materials
Composite materials
Hardness
Reinforcement
2019
1 Citation (Scopus)

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

Nanocomposites
Clay
Thermodynamic stability
Agglomeration
Coatings

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Martensite
Ferrite
Steel
Toughness
Hardness

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Steel
Heat treatment
Mechanical properties
Machinability
Carbon steel
Bending strength
Tensile strength
Glass fibers
Composite materials
Polymers
2017
3 Citations (Scopus)

Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of variance (ANOVA)
fillers
Fillers
mechanical properties
Mechanical properties
2015
2 Citations (Scopus)
Age hardening
Aging of materials
Electron microscopes
Mechanical properties
Microstructure
2018

Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

Research output: Contribution to journalArticle

Iron analysis
Nodular iron
Analysis of variance (ANOVA)
Hardness
Nickel

Machinability and related properties of austempered ductile iron: A review

Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In : Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

Research output: Contribution to journalArticle

Nodular iron
Machinability
Wear resistance
Mechanical properties
Toughness

Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

Research output: Contribution to journalArticle

Powders
Carbon steel
Copper
Reinforcement
Composite materials
2019

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In : International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Powders
Steel
Composite materials
2018
Carbon steel
Aging of materials
Powders
Composite materials
Metals
2019
3 Citations (Scopus)
Glass fibers
Drilling
Machining
Polymers
Composite materials
2 Citations (Scopus)

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
Polyesters
Mechanical testing
Glass fibers
Laminates
Bending strength

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

Polyesters
Glass fibers
Drilling
Torque
Surface roughness
1 Citation (Scopus)
Thermal shock
Glass fibers
Microstructure
Composite materials
Bending strength
5 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

Glass fibers
Polymers
Bending strength
Tensile strength
Composite materials
2015
23 Citations (Scopus)

Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In : Tribology International. 92, p. 462-471 10 p., 3770.

Research output: Contribution to journalArticle

hybrid composites
Graphite
Granite
granite
fillers
2013

Study on chip-morphology in turning of Ti-6Al-4V alloy under high pressure neat oil and soluble oil

Gowri Shankar, A., Shiva Prakash, B., Jayashree, C. & Sharma, S. S., 01-01-2013, In : International Journal of Earth Sciences and Engineering. 6, 4, p. 832-837 6 p.

Research output: Contribution to journalArticle

Machining
Cooling
cooling
oil
Titanium alloys
2015

Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

Research output: Contribution to journalArticle

Cold rolling
Fatigue of materials
Shot peening
Steel
Burnishing
2016

Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In : International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

Research output: Contribution to journalArticle

Hardening
Carbon
Steel
Heat treatment
Impact strength
2018

The hardness behaviour of TIG welded al6061 alloy using statistical tool

Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In : Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Noble Gases
Tungsten
Age hardening
Nodular iron
Machinability
Manganese
Surface roughness
Machining
Age hardening
Inert gases
Silicon carbide
Tungsten
Tensile strength
2017
1 Citation (Scopus)

Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
carbon steels
Carbon steel
steels
mechanical properties
5 Citations (Scopus)

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
heat treatment
Hardness
Heat treatment
Wear of materials
1 Citation (Scopus)

Metallography & bulk hardness of artificially aged Al6061-B4C-SiC stir cast hybrid composites

Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

hybrid composites
metallography
Metallography
casts
hardness
2018
Bainite
Ferrite
Steel
Ductility
Hardness
2019

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Microhardness
Wear resistance
Nanocomposites
Clay
Sonication
2018

Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

Research output: Contribution to journalConference article

Silicon oxides
Aging of materials
Metals
Hardness
Composite materials
3 Citations (Scopus)

Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

Research output: Contribution to journalConference article

Bainite
Steel
Phase structure
Ferrite
Temperature
2019
Cast iron
Reinforcement
Wear of materials
Composite materials
Wear resistance

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

Tensile strength
Age hardening
Aging of materials
Dispersion hardening
Cold working

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Composite materials
Reinforcement
Impact resistance
Tensile strength
Aging of materials
Austenite
Ferrite
Mechanical properties
Microstructure
Steel
2018

Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In : International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

Research output: Contribution to journalArticle

Age hardening
Inert gases
Tungsten
Welds
Tensile strength
2019

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

Nodular iron
Manganese
Hardness
Heat treatment
Tensile strength

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

Polyesters
Delamination
Glass fibers
Drilling
Composite materials
2018
5 Citations (Scopus)

Hygrothermal Studies on GFRP Composites: A Review

Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In : MATEC Web of Conferences. 144, 02026.

Research output: Contribution to journalConference article

Glass fibers
Polymers
Composite materials
Environmental chambers
Fibers
2017
10 Citations (Scopus)
Polymers
Polyesters
Tensile strength
Hardness
Composite materials
2019
4 Citations (Scopus)
Glass fibers
Aging of materials
Bending strength
Mechanical properties
Composite materials
Open Access
2017
25 Citations (Scopus)

A review on finite element method for machining of composite materials

Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In : Composite Structures. 176, p. 790-802 13 p.

Research output: Contribution to journalReview article

Drilling
Machining
Finite element method
Composite materials
Delamination

Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SICp composites

Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Noble Gases
Tungsten
precipitation hardening
Age hardening
Inert gases