Find Research Outputs

Search concepts
Selected filters
2019
Open Access
Toughness
Acetylation
Hardness
Silanes
Fibers
Implant
Polyethylene
Bone
Polyethylenes
Finite Element
2018

Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-20 20 p.

Research output: Contribution to journalArticle

Axial-flow compressors
Transonic flow
Compressors
Rotors
Stream flow
2017

Evaluation of Lingual Orthodontic appliances

Mascarenhas, R., Shenoy, S., Parveen, S., Chatra, L. & Husain, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 253-260 8 p.

Research output: Contribution to journalArticle

Brackets
Finite element method
Ligaments
Evaluation
Bone
2016
5 Citations (Scopus)
Open Access
Die casting inserts
Tapes
Turbomachine blades
Gas turbines
Cooling
7 Citations (Scopus)
Open Access
Turbomachine blades
Gas turbines
Cooling
Computational fluid dynamics
Temperature distribution
2018
2 Citations (Scopus)

Effect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-10 10 p.

Research output: Contribution to journalArticle

Bone
Polyethylene
Shielding
Polyethylenes
Metals
2019
2 Citations (Scopus)
Overlay Denture
Finite Element Analysis
Mandible
Neck
Software
2017
2 Citations (Scopus)
Axial-flow compressors
Transonic flow
Compressors
Turbomachine blades
Turbomachinery
3 Citations (Scopus)

Effect of V-shaped ribs on internal cooling of gas turbine blades

Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In : Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Cooling
Turbines
Rotors
1 Citation (Scopus)

Comparative approach to knee endoprosthesis stem materials-Static analysis of bone-implant system by the means of FEM

Pawlik, M., Ravishanker, B. B., Satish, S. B. & Raghuvir, P. B., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 261-267 7 p.

Research output: Contribution to journalArticle

Implant
Static analysis
Static Analysis
Bone
Finite element method
10 Citations (Scopus)
Bearings (structural)
static characteristics
grooves
journal bearings
Journal bearings
2014
12 Citations (Scopus)
Bearings (structural)
fluid films
static characteristics
Shear viscosity
Journal bearings
2010
2 Citations (Scopus)

A comparative fluid-structure interaction study of stenosed and normal common carotid artery

Abdul Khader, S. M., Shenoy, B. S., Raghuvir Pai, B., Mahmood, N. S., Kamath, G. & Rao, V. R. K., 11-2010, In : World Journal of Modelling and Simulation. 6, 4, p. 272-277 6 p.

Research output: Contribution to journalArticle

Fluid structure interaction
Arteries
Computational fluid dynamics
Fluid
ANSYS
2017
4 Citations (Scopus)
Bast fibers
Thermosets
Aging of materials
Polyesters
Water
2010
11 Citations (Scopus)
Bearings (structural)
fluid films
Fluids
adjusting
Reynolds equation
2019

Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In : Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

Research output: Contribution to journalArticle

Palatal Expansion Technique
Cleft Lip
Cleft Palate
Bicuspid
Crowns
2017
3 Citations (Scopus)

Numerical analysis of helical grooved channels near the leading edge region in gas turbine blade

Kini, C. R., Mendonca, R. M., Yalamarty, S. S., Kamat, H. & Satish Shenoy, B., 01-01-2017, In : International Review of Mechanical Engineering. 11, 3, p. 161-166 6 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Numerical analysis
Turbines
Cooling
2016
6 Citations (Scopus)

Effect of twisted tape inserts and stacks on internal cooling of gas turbine blades

Kini, C. R., Kamat, H. & Shenoy, B. S., 01-01-2016, In : Indian Journal of Science and Technology. 9, 31, 95978.

Research output: Contribution to journalArticle

Open Access
Die casting inserts
Tapes
Turbomachine blades
Gas turbines
Cooling
2018
4 Citations (Scopus)
Femur
Bone
Boundary conditions
Finite element method
Bone and Bones
4 Citations (Scopus)

Role of different orthopedic biomaterials on wear of hip joint prosthesis: A review

Chethan, K. N., Satish Shenoy, B. & Shyamasunder Bhat, N., 01-01-2018, In : Materials Today: Proceedings. 5, 10, p. 20827-20836 10 p.

Research output: Contribution to journalConference article

Joint prostheses
Orthopedics
Biocompatible Materials
Biomaterials
Wear of materials
2019
4 Citations (Scopus)
Open Access
Ceramics
Arthroplasty
Hip
Chromium Alloys
Hip Joint
1 Citation (Scopus)
Open Access
Finite Element Analysis
Hip Joint
Femur
Hip
Joints
2018
1 Citation (Scopus)

Three dimensional finite element stress analysis of two and four implant supported prosthesis

Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In : Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

Research output: Contribution to journalArticle

Overlay Denture
Finite Element Analysis
Prostheses and Implants
Mouth
Denture Design
2013
15 Citations (Scopus)

Development of short areca fiber reinforced biodegradable composite material

Padmaraj, N. H., Kini, M. V., Pai, B. R. & Shenoy, B. S., 01-01-2013, In : Procedia Engineering. 64, p. 966-972 7 p.

Research output: Contribution to journalConference article

Open Access
Fibers
Composite materials
Plasticizers
Starch
Water
2019
1 Citation (Scopus)

FINITE ELEMENT ANALYSIS of URINARY BLADDER WALL THICKNESS at DIFFERENT PRESSURE CONDITION

Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M. & Shenoy, B. S., 01-08-2019, In : Journal of Mechanics in Medicine and Biology. 19, 5, 1950029.

Research output: Contribution to journalArticle

Pressure gradient
Loads (forces)
Mechanical properties
Mucous Membrane
2012

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Bearing pads
Turbulence
Fluids
Reynolds equation
2019
Overlay Denture
Finite Element Analysis
Bone
Finite element method
Bone and Bones
2018
1 Citation (Scopus)
Stents
Balloons
Hemodynamics
Struts
Shear stress
1 Citation (Scopus)
Ducts
Turbomachine blades
Computational fluid dynamics
Turbines
Heat transfer
2015
6 Citations (Scopus)

Experimental study of hydrodynamic pressure distribution in oil lubricated two-axial groove journal bearing

Binu, K. G., Yathish, K., Mallya, R., Shenoy, B. S., Rao, D. S. & Pai, R., 01-01-2015, In : Materials Today: Proceedings. 2, 4-5, p. 3453-3462 10 p.

Research output: Contribution to journalArticle

Journal bearings
Pressure distribution
Oils
Hydrodynamics
Pressure measurement
2016
7 Citations (Scopus)
Polyesters
Bast fibers
Polyester resins
Fibers
Composite materials
2010
5 Citations (Scopus)
Bearings (structural)
Elastohydrodynamic Lubrication
Journal Bearing
Interaction Techniques
Fluid structure interaction
2015
3 Citations (Scopus)

A 3 dimensional assessment of the depth of tumor invasion in microinvasive tongue squamous cell carcinoma - A case series analysis

Amit-Byatnal, A., Natarajan, J., Shenoy, S., Kamath, A., Hunter, K. & Rad-Hakrishnan, R., 01-11-2015, In : Medicina Oral, Patologia Oral y Cirugia Bucal. 20, 6, p. e645-e650

Research output: Contribution to journalArticle

Tongue
Squamous Cell Carcinoma
Neoplasms
Nonparametric Statistics
Recurrence
2017
Bearings (structural)
whirl
Reynolds number
perturbation
eccentricity
2018
1 Citation (Scopus)
Implant-Supported Dental Prosthesis
Finite Element Analysis
Dentures
Bone and Bones
Mandible
2019

Combustion chamber design for efficient heat transfer

Kasturia, K., Saha, A., Singhal, A., Satish Shenoy, B. & Kini, C. R., 01-01-2019, In : ARPN Journal of Engineering and Applied Sciences. 14, 5, p. 1100-1103 4 p.

Research output: Contribution to journalArticle

Combustion chambers
Heat transfer
Engines
Gases
Diesel engines

Comparative evaluation of stress distribution in bone surrounding implant using different implant biomaterials: A 3DFEA study

Haseeb, S. A., Abdul Khader, S. M., Satish Shenoy, B., Naveen, Y. G., Giridhar Kamath, P. & Vinaya, K. C., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 523-532 10 p.

Research output: Contribution to journalArticle

Biomaterials
Implant
Stress Distribution
Bone
Stress concentration
2016
6 Citations (Scopus)

CHT analysis of trailing edge region cooling in HP stage turbine blade

Kini, C. R., Yalamarty, S. S., Mendonca, R. M., Sharma, N. Y. & Shenoy, B. S., 2016, In : Indian Journal of Science and Technology. 9, 6

Research output: Contribution to journalArticle

Turbomachine blades
Turbines
Fins (heat exchange)
Cooling
Gas turbines
2019
Ambulances
Emergency vehicles
Sensors
Ergonomics
Accelerometers
2018
1 Citation (Scopus)

Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

Bast fibers
Polymers
Wear of materials
Fibers
Composite materials
2017

Selected peer-reviewed articles from the first international conference on healthcare and technical research (ICHTR 2015), Manipal, India, 22–24 december, 2015

Udupa, N., Shenoy, B. S., Radhakrishnan, R., Janodia, M. D., Chaudhary, S., Devkar, R. A., Jain, P. & Menon, S., 01-03-2017, In : Advanced Science Letters. 23, 3, p. 1714-1717 4 p.

Research output: Contribution to journalComment/debate

2010
3 Citations (Scopus)
helium-neon lasers
healing
regeneration
irradiation
evaluation
2019

Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

Research output: Contribution to journalArticle

Three-dimensional
Model
Computerized tomography
Vertex of a graph
Large Displacements
2018

Application of finite element analysis on balloon expandable coronary stents: A review

Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

Research output: Contribution to journalArticle

Open Access
Finite Element Analysis
Stents
Balloons
Finite element method
Arteries
1 Citation (Scopus)
Turbomachinery
Engines
Propulsion
Turboprop engines
Turbojet engines
Axial-flow compressors
Air
Engines
Aircraft
Machinery
2017

Dynamic performance characteristics of finite journal bearings operating on TiO2 based nanolubricants

Binu, K. G., Yathish, K., Shenoy, B. S., Rao, D. S. & Pai, R., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 963-976 14 p.

Research output: Contribution to journalArticle

Journal bearings
nanoparticles
Nanoparticles
Lubricants
lubricants
2010
7 Citations (Scopus)

Stability of tri-taper journal bearings under dynamic load using a non-linear transient method

Rao, D. S., Shenoy, B. S., Pai, R. S. & Pai, R., 09-2010, In : Tribology International. 43, 9, p. 1584-1591 8 p.

Research output: Contribution to journalArticle

Bearings (structural)
journal bearings
dynamic loads
Journal bearings
tapering
2018
1 Citation (Scopus)
Bast fibers
Polyesters
Mechanical properties
Fibers
Composite materials