Find Research Outputs

Search concepts
Selected filters
2017
10 Citations (Scopus)
Bearings (structural)
static characteristics
grooves
journal bearings
Journal bearings
1 Citation (Scopus)
Dental prostheses
Implant
Fatigue Life
Fatigue of materials
Grid
4 Citations (Scopus)
Bast fibers
Thermosets
Aging of materials
Polyesters
Water
2018

Axial-flow compressor analysis under distorted phenomena at transonic flow conditions

Srinivas, G., Raghunandana, K. & Satish, S. B., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-20 20 p.

Research output: Contribution to journalArticle

Axial-flow compressors
Transonic flow
Compressors
Rotors
Stream flow
2011
12 Citations (Scopus)
Bearings (structural)
fluid films
Turbulence
turbulence
lubricants
2017

Selected peer-reviewed articles from the first international conference on healthcare and technical research (ICHTR 2015), Manipal, India, 22–24 december, 2015

Udupa, N., Shenoy, B. S., Radhakrishnan, R., Janodia, M. D., Chaudhary, S., Devkar, R. A., Jain, P. & Menon, S., 01-03-2017, In : Advanced Science Letters. 23, 3, p. 1714-1717 4 p.

Research output: Contribution to journalComment/debate

Preface

Pai, R., Shenoy, S. & Khader, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 217-218 2 p.

Research output: Contribution to journalEditorial

2018
4 Citations (Scopus)
Femur
Bone
Boundary conditions
Finite element method
Bone and Bones
2019

Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In : Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

Research output: Contribution to journalArticle

Palatal Expansion Technique
Cleft Lip
Cleft Palate
Bicuspid
Crowns
2017
3 Citations (Scopus)

Numerical analysis of helical grooved channels near the leading edge region in gas turbine blade

Kini, C. R., Mendonca, R. M., Yalamarty, S. S., Kamat, H. & Satish Shenoy, B., 01-01-2017, In : International Review of Mechanical Engineering. 11, 3, p. 161-166 6 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Numerical analysis
Turbines
Cooling
2018
1 Citation (Scopus)
Bast fibers
Polyesters
Mechanical properties
Fibers
Composite materials
2016
5 Citations (Scopus)
Open Access
Die casting inserts
Tapes
Turbomachine blades
Gas turbines
Cooling
2015
21 Citations (Scopus)
Bearings (structural)
journal bearings
Journal bearings
misalignment
grooves
2019
1 Citation (Scopus)

FINITE ELEMENT ANALYSIS of URINARY BLADDER WALL THICKNESS at DIFFERENT PRESSURE CONDITION

Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M. & Shenoy, B. S., 01-08-2019, In : Journal of Mechanics in Medicine and Biology. 19, 5, 1950029.

Research output: Contribution to journalArticle

Pressure gradient
Loads (forces)
Mechanical properties
Mucous Membrane
Overlay Denture
Finite Element Analysis
Bone
Finite element method
Bone and Bones
2018

Application of finite element analysis on balloon expandable coronary stents: A review

Bekal, C., Yamada, H., Shetty, R. & Shenoy, S., 01-01-2018, In : International Journal of Engineering and Technology(UAE). 7, 3, p. 1640-1647 8 p.

Research output: Contribution to journalArticle

Open Access
Finite Element Analysis
Stents
Balloons
Finite element method
Arteries
2019
2 Citations (Scopus)
Overlay Denture
Finite Element Analysis
Mandible
Neck
Software
2018
1 Citation (Scopus)

Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In : Cogent Engineering. 5, 1, p. 1-8 8 p.

Research output: Contribution to journalArticle

Bast fibers
Polymers
Wear of materials
Fibers
Composite materials
2011
4 Citations (Scopus)

Dynamic characteristics of a single pad externally adjustable fluid film bearing

Shenoy, S. & Pai, R., 03-05-2011, In : Industrial Lubrication and Tribology. 63, 3, p. 146-151 6 p.

Research output: Contribution to journalArticle

Bearings (structural)
Bearing pads
Fluids
Film thickness
Damping
2018
1 Citation (Scopus)
Implant-Supported Dental Prosthesis
Finite Element Analysis
Dentures
Bone and Bones
Mandible
3 Citations (Scopus)
Structural analysis
Bearings (structural)
Femur
Bone
Bone and Bones
Axial-flow compressors
Air
Engines
Aircraft
Machinery
2017
1 Citation (Scopus)

Comparative approach to knee endoprosthesis stem materials-Static analysis of bone-implant system by the means of FEM

Pawlik, M., Ravishanker, B. B., Satish, S. B. & Raghuvir, P. B., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 261-267 7 p.

Research output: Contribution to journalArticle

Implant
Static analysis
Static Analysis
Bone
Finite element method
2012
31 Citations (Scopus)

Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing

Shenoy, B. S., Binu, K. G., Pai, R., Rao, D. S. & Pai, R., 01-01-2012, In : Tribology International. 45, 1, p. 38-42 5 p.

Research output: Contribution to journalArticle

Bearings (structural)
fluid films
Application programming interfaces (API)
application programming interface
Diesel engines
2017
6 Citations (Scopus)
turbine blades
trailing edges
gas turbines
Turbomachine blades
Gas turbines
2016
6 Citations (Scopus)

CHT analysis of trailing edge region cooling in HP stage turbine blade

Kini, C. R., Yalamarty, S. S., Mendonca, R. M., Sharma, N. Y. & Shenoy, B. S., 2016, In : Indian Journal of Science and Technology. 9, 6

Research output: Contribution to journalArticle

Turbomachine blades
Turbines
Fins (heat exchange)
Cooling
Gas turbines
2019
1 Citation (Scopus)

Effect of helix angle and cross section of helicoidal ducts in gas turbine blade cooling

Kini, C. R., Purohit, S., Bhagat, K. K. & Shenoy B., S., 01-01-2019, In : International Review of Mechanical Engineering. 13, 2, p. 87-96 10 p.

Research output: Contribution to journalArticle

Ducts
Turbomachine blades
Gas turbines
Cooling
Thermal load
2015
6 Citations (Scopus)

Experimental study of hydrodynamic pressure distribution in oil lubricated two-axial groove journal bearing

Binu, K. G., Yathish, K., Mallya, R., Shenoy, B. S., Rao, D. S. & Pai, R., 01-01-2015, In : Materials Today: Proceedings. 2, 4-5, p. 3453-3462 10 p.

Research output: Contribution to journalArticle

Journal bearings
Pressure distribution
Oils
Hydrodynamics
Pressure measurement
2016
7 Citations (Scopus)
Open Access
Turbomachine blades
Gas turbines
Cooling
Computational fluid dynamics
Temperature distribution
2019
Open Access
Toughness
Acetylation
Hardness
Silanes
Fibers

Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In : Materials Today: Proceedings. 19, p. 658-662 5 p.

Research output: Contribution to journalConference article

Carbon fibers
Polymers
Adhesives
Silanes
Machinability
2012
1 Citation (Scopus)
Bearings (structural)
Journal bearings
Reynolds equation
Linearization
Finite difference method

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Bearing pads
Turbulence
Fluids
Reynolds equation
2017
2 Citations (Scopus)
Axial-flow compressors
Transonic flow
Compressors
Turbomachine blades
Turbomachinery
2018
1 Citation (Scopus)

Three dimensional finite element stress analysis of two and four implant supported prosthesis

Hegde, P., Dhanasekar, B., Shenoy, S., Aparna, I. N., Gupta, L., Umesh, Y. & Mahesh, M., 01-11-2018, In : Indian Journal of Public Health Research and Development. 9, 11, p. 126-131 6 p.

Research output: Contribution to journalArticle

Overlay Denture
Finite Element Analysis
Prostheses and Implants
Mouth
Denture Design
2015
3 Citations (Scopus)

A 3 dimensional assessment of the depth of tumor invasion in microinvasive tongue squamous cell carcinoma - A case series analysis

Amit-Byatnal, A., Natarajan, J., Shenoy, S., Kamath, A., Hunter, K. & Rad-Hakrishnan, R., 01-11-2015, In : Medicina Oral, Patologia Oral y Cirugia Bucal. 20, 6, p. e645-e650

Research output: Contribution to journalArticle

Tongue
Squamous Cell Carcinoma
Neoplasms
Nonparametric Statistics
Recurrence
2017
3 Citations (Scopus)

Effect of V-shaped ribs on internal cooling of gas turbine blades

Kamat, H., Shenoy, S. B. & Kini, C. R., 01-01-2017, In : Journal of Engineering and Technological Sciences. 49, 4, p. 520-533 14 p.

Research output: Contribution to journalArticle

Turbomachine blades
Gas turbines
Cooling
Turbines
Rotors
2019

Combustion chamber design for efficient heat transfer

Kasturia, K., Saha, A., Singhal, A., Satish Shenoy, B. & Kini, C. R., 01-01-2019, In : ARPN Journal of Engineering and Applied Sciences. 14, 5, p. 1100-1103 4 p.

Research output: Contribution to journalArticle

Combustion chambers
Heat transfer
Engines
Gases
Diesel engines
4 Citations (Scopus)
Open Access
Ceramics
Arthroplasty
Hip
Chromium Alloys
Hip Joint

Comparative evaluation of stress distribution in bone surrounding implant using different implant biomaterials: A 3DFEA study

Haseeb, S. A., Abdul Khader, S. M., Satish Shenoy, B., Naveen, Y. G., Giridhar Kamath, P. & Vinaya, K. C., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 523-532 10 p.

Research output: Contribution to journalArticle

Biomaterials
Implant
Stress Distribution
Bone
Stress concentration

Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In : Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

Research output: Contribution to journalArticle

Three-dimensional
Model
Computerized tomography
Vertex of a graph
Large Displacements
2011
13 Citations (Scopus)

Effect of increased severity in patient specific stenosis of common carotid artery using CFD-a case study

Khader, S. M. A., Shenoy, B. S., Pai, R., Kamath, S. G., Sharif, N. M. & Rao, V. R. K., 2011, In : World Journal of Modelling and Simulation. 7, 2, p. 113-122 10 p.

Research output: Contribution to journalArticle

Stenosis
Arteries
Computational Fluid Dynamics
Shear stress
Computational fluid dynamics
2017
2 Citations (Scopus)
Fluid structure interaction
Turbomachine blades
Gas turbines
Cooling
Ducts
2018
Biomechanics
Hip Joint
Joint prostheses
Biomechanical Phenomena
Biocompatible Materials
2017
Bearings (structural)
whirl
Reynolds number
perturbation
eccentricity

Dynamic performance characteristics of finite journal bearings operating on TiO2 based nanolubricants

Binu, K. G., Yathish, K., Shenoy, B. S., Rao, D. S. & Pai, R., 01-07-2017, In : Pertanika Journal of Science and Technology. 25, 3, p. 963-976 14 p.

Research output: Contribution to journalArticle

Journal bearings
nanoparticles
Nanoparticles
Lubricants
lubricants
2019
Implant
Polyethylene
Bone
Polyethylenes
Finite Element
2016
7 Citations (Scopus)
Polyesters
Bast fibers
Polyester resins
Fibers
Composite materials
2018
1 Citation (Scopus)
Ducts
Turbomachine blades
Computational fluid dynamics
Turbines
Heat transfer
2017

Evaluation of Lingual Orthodontic appliances

Mascarenhas, R., Shenoy, S., Parveen, S., Chatra, L. & Husain, A., 2017, In : Journal of Computational Methods in Sciences and Engineering. 17, 2, p. 253-260 8 p.

Research output: Contribution to journalArticle

Brackets
Finite element method
Ligaments
Evaluation
Bone