Find Research outputs

Search results

• 2020

  Experimental investigation into helical hole milling of fiber metal Laminates

  Hemant, K., Kona, A., Karthik, S. A. & Bolar, G., 01-01-2020, In: Materials Today: Proceedings. 27, p. 208-216 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)
• 2016

  Effect of process parameters on the surface roughness generated on graphite laced GFRP composite by AWJ machining

  Doreswamy, D., Eqbal, B., Sangolagi, S. & Devineni, A., 01-01-2016, In: International Journal of Abrasive Technology. 7, 4, p. 294-306 13 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2017

  Experimental evaluation of the chill casting method for the fabrication of LM-25 aluminum alloy-borosilicate glass (p) composites

  Hiremath, A. & Hemanth, J., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 69-73 5 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Experimental evaluation of the coefficient of thermal expansion of chilled aluminum alloy-borosilicate glass (P) composite

  Hiremath, A. & Hemanth, J., 01-01-2017, In: Journal of Materials and Environmental Science. 8, 12, p. 4246-4252 7 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2020

  Study on effect of water soaking conditions on properties and morphology of glass fiber-cement-polyester composites

  Shettara, M., Shettigara, P., Manjunathb, M. & Rao, U. S., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8697-8704 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)
• 2019

  An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  10 Citations (Scopus)
• 2020

  Simulation of smarter battery management system and charging for electrical vehicle application

  Pagaria, S., Naik, N., Chiniwar, D. S., Sooriyaperakasam, N. & Rathee, U., 09-2020, In: Journal of Green Engineering. 10, 9, p. 5365-5379 15 p.

  Research output: Contribution to journal › Article › peer-review
• 2021

  Bibliometric Analysis of Research Trends in Rice Straw/Husk Reinforced Polymer Composites

  Deepak, D., Madival, A. S. & Bongale, A. M., 2021, In: Library Philosophy and Practice. 2021, p. 1-36 36 p.

  Research output: Contribution to journal › Article › peer-review
• 2022

  Performance Evaluation of Transonic Axial Flow Compressor under Distorted Conditions by Groove Casing Technique with Tip Injection and Surface Roughness Effects

  Srinivas, G., Raghunandana, K. & Shenoy, B. S., 2022, (Accepted/In press) In: Journal of The Institution of Engineers (India): Series C.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Stability performance of series coupled natural circulation system with different operating procedures

  Elton, D. N., Arunachala, U. C. & Vijayan, P. K., 09-2022, In: International Journal of Thermal Sciences. 179, 107693.

  Research output: Contribution to journal › Article › peer-review
• 2020

  Surface Engineering of Titanium Using Anodization and Plasma Treatment

  Mallaiah, M. & Gupta, R. K., 02-11-2020, In: IOP Conference Series: Materials Science and Engineering. 943, 1, 012016.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)
• 2021

  Investigation on tensile properties and analysis of wear property of glass fiber-epoxy-nanoclay ternary nanocomposite using response surface methodology

  Hiremath, P., Kini U, A., Shettar, M., Sharma, S. & P K, J., 2021, In: Cogent Engineering. 8, 1, 1877869.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)
• 2018

  Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

  Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)
• 2017

  Characterization of Laser Remelted Plasma-Sprayed Mo Coating on AISI 1020 Steel

  Manjunatha, S. S., Manjaiah, M. & Basavarajappa, S., 01-09-2017, In: Silicon. 9, 5, p. 741-751 11 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2019

  Computational fluid dynamic study on effect of Carreau-Yasuda and Newtonian blood viscosity models on hemodynamic parameters

  Kumar, N., Khader, A., Pai, R., Kyriacou, P., Khan, S. & Koteshwara, P., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 465-477 13 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)
• 2018

  A study of inventory management at manufacturing industries in rural India

  Shetty, P. K. & Raghavendra Kamath, C., 26-12-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 1, p. 73-80 8 p., IJMPERDFEB20198.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  14 Citations (Scopus)
• 2013

  Effect of staggered splitters on the flow characteristics in a centrifugal fan - A numerical study

  Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-01-2013, In: International Journal of Earth Sciences and Engineering. 6, 4, p. 821-825 5 p.

  Research output: Contribution to journal › Article › peer-review
• 2019

  Experimental study on the tension-tension fatigue behaviour of glass/epoxy quasi-isotropic composites

  Padmaraj, N. H., Vijaya, K. M. & Dayananda, P., 01-01-2019, In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)
• 2011

  Artificial Neural Network based prediction of performance and emission characteristics of a variable compression ratio CI engine using WCO as a biodiesel at different injection timings

  Shivakumar, Srinivasa Pai, P. & Shrinivasa Rao, B. R., 01-01-2011, In: Applied Energy. 88, 7, p. 2344-2354 11 p.

  Research output: Contribution to journal › Article › peer-review
  158 Citations (Scopus)
• 2021

  Artificial intelligence and its impact on urological diseases and management: A comprehensive review of the literature

  Zeeshan Hameed, B. M., Aiswarya Dhavileswarapu, V. L. S., Raza, S. Z., Karimi, H., Khanuja, H. S., Shetty, D. K., Ibrahim, S., Shah, M. J., Naik, N., Paul, R., Rai, B. P. & Somani, B. K., 01-05-2021, In: Journal of Clinical Medicine. 10, 9, 1864.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  7 Citations (Scopus)
• 2018

  Tensile fractography of artificially aged Al6061-B4C composites

  Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)
• 2021

  Measuring routine childhood vaccination coverage in 204 countries and territories, 1980–2019: a systematic analysis for the Global Burden of Disease Study 2020, Release 1

  GBD 2020, Release 1, Vaccine Coverage Collaborators, T, R. & Rao P P, J., 07-08-2021, In: The Lancet. 398, 10299, p. 503-521 19 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  22 Citations (Scopus)

• Finite element analysis of hip implant with varying in taper neck lengths under static loading conditions

  Chethan, K. N., Shyamasunder Bhat, N., Zuber, M. & Satish Shenoy, B., 09-2021, In: Computer Methods and Programs in Biomedicine. 208, 106273.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Infiltrating spinal angiolipoma with paraplegia and hydrocephalus: A rare case report

  Velayudhan, D., Bhat, S. N. & Mohanty, S. P., 01-04-2021, In: Journal of Taibah University Medical Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Steroid dependence in acute asthma due to myasthenia gravis

  Shahul, H., Manu, M. & Mohapatra, A., 01-09-2021, In: Lung India. 38, 5, p. 496-498 3 p.

  Research output: Contribution to journal › Letter › peer-review

  Open Access

• Mangifera Indica mid-rib fibers as reinforcements for CNSL-epoxy composites

  Shenoy Heckadka, S., Nayak, S. Y. & Samant, R., 2021, (Accepted/In press) In: Journal of the Textile Institute.

  Research output: Contribution to journal › Article › peer-review
• 2020

  Experimental study with analytical validation of energy parameters in parabolic trough collector with twisted tape insert

  Arunachala, U. C., 06-2020, In: Journal of Solar Energy Engineering, Transactions of the ASME. 142, 3, 4045825.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2021

  Entropy Generation Minimization of Vapour Absorption Heat Transformer

  Sekar, S., Chandrasekar, P., Kumar, S., Jospher, A. J. S., Sheeja, R., Valarmathi, T. N. & Lionus Leo, G. M., 2021, Theoretical, Computational, and Experimental Solutions to Thermo-Fluid Systems - Select Proceedings of ICITFES 2020. Palanisamy, M., Ramalingam, V. & Sivalingam, M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 265-274 10 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2018

  Inhibiting action of N-Napthyl-Nl-Phenyl thiourea on the corrosion of 304 Ss In HCL medium

  Shetty, N. & Herle, R., 01-02-2018, In: International Journal of Civil Engineering and Technology. 9, 2, p. 507-515 9 p.

  Research output: Contribution to journal › Article › peer-review

• Hemodynamics of Idealized Carotid Artery

  Puritipati, C., Keri, V. & Kumar, N., 09-01-2018, In: MATEC Web of Conferences. 144, 01020.

  Research output: Contribution to journal › Conference article › peer-review

• Flow blockage in a transonic axial flow compressor: Simulation analysis under distorted conditions

  Srinivas, G., Raghunandana, K. & Shenoy, B. S., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 2, p. 43-49 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

  Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2019

  Heat Transfer Augmentation Using an Innovative Helicoidal Finned Absorber Plate in a Solar Air Heater-A Numerical Study

  Purohit, S., Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-06-2019, In: Journal of Solar Energy Engineering, Transactions of the ASME. 141, 3, 031016.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2011

  Comparison of flow in normal and stenosed carotid bulb

  Khader, S. M. A., Pai, B. R., Ayachit, A., Rao, V. R. K. & Kamath, S. G., 29-09-2011, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. p. 245-248 4 p. 6014889

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Dynamic characteristics of a single pad externally adjustable fluid film bearing

  Shenoy, S. & Pai, R., 03-05-2011, In: Industrial Lubrication and Tribology. 63, 3, p. 146-151 6 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)
• 2012

  FSI simulation of common carotid under normal and high blood pressures

  Abdul Khader, S. M., Ayachit, A., Pai, B. R., Rao, V. R. K. & Kamath, S. G., 03-12-2012, In: Advances in Mechanical Engineering. 2012, 140579.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2015

  Effect of seawater on mechanical properties of GFRP with cement as filler material for fishing boat application

  Shettar, M. & Hiremath, P., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 19, p. 40027-40030 4 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)
• 2019

  Use of alternative fuels in compression ignition engines: a review

  Shivakumar & Dinesha, P., 01-05-2019, In: Biofuels. p. 1-11 11 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)
• 2016

  Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2010

  The effect of fuel volatility on droplet depletion rate and penetration of vaporizing fuel droplets in a gas turbine combustor

  Sharma, N. Y., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 82-86 5 p. 5598498

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2021

  Effects of particle size of cerium oxide nanoparticles on the combustion behavior and exhaust emissions of a diesel engine powered by biodiesel/diesel blend

  Dinesha, P., Kumar, S. & Rosen, M. A., 2021, In: Biofuel Research Journal. 8, 2, p. 1374-1383 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  11 Citations (Scopus)
• 2020

  Cone beam computed tomography for mechanical characterization of Flax/Jute/Ultra high molecular weight polyethylene reinforced phenol formaldehyde composites: A comparative assessment

  Shenoy Heckadka, S., Pai Ballambat, R., Kini Manjeshwar, V., Ravindranath, V., Hegde, P. & Kamath, A., 2020, In: Materials Today: Proceedings. 47, p. 6740-6745 6 p.

  Research output: Contribution to journal › Conference article › peer-review
• 2021

  Effect of CNT-Based Resin Modification on the Mechanical Properties of Polymer Composites

  Nayak, S. Y., Shenoy, S., Hameed Sultan, M. T., Kini, C. R., Seth, A., Prabhu, S. & Safri, S. N. A., 29-01-2021, In: Frontiers in Materials. 7, 609010.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)
• 2013

  Comparative Study Of Blood Flow Through Normal And Stenosed Common Carotid Artery Using Fluid-Structure Interaction

  Abdul Khader, S. M., Raghuvir Pai, B., Ayachit, A., Ahmed, K. A., Rao, V. R. K. & Ganesh Kamath, S., 2013, In: International Journal of Earth Sciences and Engineering. 6, 4, p. 866-871 6 p.

  Research output: Contribution to journal › Article › peer-review
• 2021

  A review of literature on single-bundle anterior cruciate ligament (ACL) reconstruction

  Bhat, B. K., Adhikari, R. & Acharya, K. K. V., 04-06-2021, Advances in Health and Disease. Volume 39. Nova Science Publishers, Inc., p. 101-120 20 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• RSM based expert system development for cutting force prediction during machining of Ti–6Al–4V under minimum quantity lubrication

  Shetty, R., Kumar, C. R. S. & Ravindra, M. R., 2021, (Accepted/In press) In: International Journal of Systems Assurance Engineering and Management.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2019

  Mechanical and machinability study on discontinuously reinforced sisal fibre polyester composite laminates

  Shetty, R., Barboza, A. B. V. & Nayak, R., 18-09-2019, In: Materials Research Express. 6, 10, 105370.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Disparity Maps Based Path Planning Algorithm for Autonomous Robot Navigation

  Shetty, A. A., George, V. I., Nayak, C. G. & Shetty, R., 06-2019, Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019. Institute of Electrical and Electronics Engineers Inc., p. 669-675 7 p. 8821808. (Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Influence of seawater absorption on vibrational and tensile characteristics of quasi-isotropic glass/epoxy composites

  Pavan, A., Dayananda, P., Vijaya, K. M., Hegde, S. & Narampady Hosagade, P., 01-01-2019, In: Journal of Materials Research and Technology. 8, 1, p. 1427-1433 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  12 Citations (Scopus)

• Experimental investigation on silicon carbide reinforced Duralumin based mmc produced by cold compacting

  Gowri Shankar, M. C., Shivaprakash, Y. M., Siddesh Kumar, N. M., Siddhartha, M. A. & Dutta, A., 01-04-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 507-524 18 p., IJMPERDAPR201949.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)