Find Research Outputs

Search concepts
Selected filters
2016
2 Citations (Scopus)

Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In : Indian Journal of Science and Technology. 9, 37, 97422.

Research output: Contribution to journalArticle

Hardness
Heat treatment
Mechanical properties
Wear resistance
Steel
2019

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Microhardness
Wear resistance
Nanocomposites
Clay
Sonication
2018

The hardness behaviour of TIG welded al6061 alloy using statistical tool

Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In : Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Noble Gases
Tungsten
Age hardening
2019

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

Polyesters
Glass fibers
Drilling
Torque
Surface roughness
Open Access
Design of experiments
Carbon fibers
Laminates
Drilling
Surface roughness
2015
1 Citation (Scopus)

Production, testing and microstructural investigation on fly ash reinforced aluminium alloy matrix composite

Shivaprakash, Y. M., Gurumurthy, B. M., Sharma, S. S., Jayashree, P. K. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 20, p. 41583-41590 8 p.

Research output: Contribution to journalArticle

Fly ash
Aluminum alloys
Composite materials
Testing
Precipitates
2016
1 Citation (Scopus)

Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B4C particles

Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In : Indian Journal of Science and Technology. 9, 12, 88073.

Research output: Contribution to journalArticle

Aging of materials
Wear of materials
Composite materials
Wear resistance
Hardness
1 Citation (Scopus)

Study on dual-phase structure of AISI4140 steel

Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In : Indian Journal of Science and Technology. 9, 33, 93526.

Research output: Contribution to journalArticle

Phase structure
Steel
Impact resistance
Bainite
High strength steel
2019
2 Citations (Scopus)

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
Polyesters
Mechanical testing
Glass fibers
Laminates
Bending strength
2017
3 Citations (Scopus)

Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Analysis of variance (ANOVA)
fillers
Fillers
mechanical properties
Mechanical properties
2015

Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

Research output: Contribution to journalArticle

Cold rolling
Fatigue of materials
Shot peening
Steel
Burnishing
2017

Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

experiment design
Design of experiments
Age hardening
hardness
Aging of materials
2019
Open Access
Glass fibers
Aging of materials
Composite materials
fiberglass
Casting
2018

Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

Research output: Contribution to journalArticle

Iron analysis
Nodular iron
Analysis of variance (ANOVA)
Hardness
Nickel
2016
2 Citations (Scopus)

Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In : International Journal of Technology. 7, 6, p. 1000-1008 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Composite materials
Metals
Wear resistance
2019
Steel
Low carbon steel
Microstructure
Wear of materials
Case hardening
5 Citations (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

Glass fibers
Polymers
Bending strength
Tensile strength
Composite materials
1 Citation (Scopus)
Thermal shock
Glass fibers
Microstructure
Composite materials
Bending strength
4 Citations (Scopus)
Glass fibers
Aging of materials
Bending strength
Mechanical properties
Composite materials
3 Citations (Scopus)
Aging of materials
Mechanical properties
Water
Composite materials
Epoxy Resins
2 Citations (Scopus)

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

Nanocomposites
Clay
Thermodynamic stability
Agglomeration
Coatings
2017
5 Citations (Scopus)

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
heat treatment
Hardness
Heat treatment
Wear of materials
2018
3 Citations (Scopus)

Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

Research output: Contribution to journalConference article

Bainite
Steel
Phase structure
Ferrite
Temperature
2019

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Composite materials
Reinforcement
Impact resistance
Tensile strength
Aging of materials

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

Nodular iron
Manganese
Hardness
Heat treatment
Tensile strength

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Martensite
Ferrite
Steel
Toughness
Hardness
2013

Study on chip-morphology in turning of Ti-6Al-4V alloy under high pressure neat oil and soluble oil

Gowri Shankar, A., Shiva Prakash, B., Jayashree, C. & Sharma, S. S., 01-01-2013, In : International Journal of Earth Sciences and Engineering. 6, 4, p. 832-837 6 p.

Research output: Contribution to journalArticle

Machining
Cooling
cooling
oil
Titanium alloys
2018

Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

Research output: Contribution to journalConference article

Inert gas welding
Tungsten
Design of experiments
Welding
Welds
Carbon steel
Aging of materials
Powders
Composite materials
Metals
2015
2 Citations (Scopus)
Age hardening
Aging of materials
Electron microscopes
Mechanical properties
Microstructure
2018
1 Citation (Scopus)

Effect of heat treatment and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

Research output: Contribution to journalArticle

Steel
Tensile strength
Hardness
Heat treatment
Wear of materials
2019

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

Polyesters
Glass fibers
Drilling
Delamination
Composite materials

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

Polyesters
Delamination
Glass fibers
Drilling
Composite materials

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Steel
Heat treatment
Mechanical properties
Machinability
Carbon steel
2017
1 Citation (Scopus)

Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
carbon steels
Carbon steel
steels
mechanical properties
2018
1 Citation (Scopus)

Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B4C and Al6061-SiC Composites

Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

Research output: Contribution to journalArticle

Aging of materials
Hardness
Composite materials
Age hardening
Alloying elements
Bainite
Ferrite
Steel
Ductility
Hardness
Nodular iron
Machinability
Manganese
Surface roughness
Machining
Age hardening
Inert gases
Silicon carbide
Tungsten
Tensile strength
2017
1 Citation (Scopus)

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Silicon Dioxide
Aging of materials
Silica
silicon dioxide
composite materials
1 Citation (Scopus)

Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Steel
Martensite
Ferrite
Tempering
Impact resistance
2015
23 Citations (Scopus)

Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In : Tribology International. 92, p. 462-471 10 p., 3770.

Research output: Contribution to journalArticle

hybrid composites
Graphite
Granite
granite
fillers
2017
1 Citation (Scopus)

Metallography & bulk hardness of artificially aged Al6061-B4C-SiC stir cast hybrid composites

Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

hybrid composites
metallography
Metallography
casts
hardness
26 Citations (Scopus)

A review on finite element method for machining of composite materials

Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In : Composite Structures. 176, p. 790-802 13 p.

Research output: Contribution to journalReview article

Drilling
Machining
Finite element method
Composite materials
Delamination
10 Citations (Scopus)
Polymers
Polyesters
Tensile strength
Hardness
Composite materials
2018

Effect of precipitation hardening on stir cast AL6061-B4C reinforced composite

Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

Research output: Contribution to journalArticle

Age hardening
Aging of materials
Composite materials
Tensile strength
Hardness
2019

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

Steel
Age hardening
Powders
Carbon steel
Metals
2015
1 Citation (Scopus)

Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy

Gowri Shankar, M. C., Achutha Kini, U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 18-24 7 p.

Research output: Contribution to journalArticle

Age hardening
Reinforcement
Aging of materials
Precipitates
Composite materials
2018

Quench hardening and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

Research output: Contribution to journalArticle

Steel
Castor Oil
Hardening
Ice
Water