Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Sathya Shankara Sharma
2019

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

2 Citations (Scopus)
2016

Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B4C particles

Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In : Indian Journal of Science and Technology. 9, 12, 88073.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In : Indian Journal of Science and Technology. 9, 37, 97422.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2019
3 Citations (Scopus)
2016

Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In : MATEC Web of Conferences. 77, 10006.

Research output: Contribution to journalConference article

2019

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SICp composites

Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metallography & bulk hardness of artificially aged Al6061-B4C-SiC stir cast hybrid composites

Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2019

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

5 Citations (Scopus)
4 Citations (Scopus)
Open Access
2017

Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In : Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

Research output: Contribution to journalArticle

2019
Open Access

Aging kinetics and microstructural features of Al6061-SiC+B4C stir cast hybrid composites

Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In : International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

Research output: Contribution to journalArticle

Open Access
2015
2 Citations (Scopus)
2019

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
Open Access

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

2013

Study on chip-morphology in turning of Ti-6Al-4V alloy under high pressure neat oil and soluble oil

Gowri Shankar, A., Shiva Prakash, B., Jayashree, C. & Sharma, S. S., 01-01-2013, In : International Journal of Earth Sciences and Engineering. 6, 4, p. 832-837 6 p.

Research output: Contribution to journalArticle

2016

Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In : International Journal of Technology. 7, 6, p. 1000-1008 9 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2017

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A review on finite element method for machining of composite materials

Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In : Composite Structures. 176, p. 790-802 13 p.

Research output: Contribution to journalReview article

29 Citations (Scopus)

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2017

FRP-Nanoclay hybrid composites: A review

Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)
2019
1 Citation (Scopus)

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In : International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journalArticle

2020

Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Open Access
2019

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

2015

Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

Research output: Contribution to journalArticle

2017

Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2019

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

2015

Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy

Gowri Shankar, M. C., Achutha Kini, U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 18-24 7 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Production, testing and microstructural investigation on fly ash reinforced aluminium alloy matrix composite

Shivaprakash, Y. M., Gurumurthy, B. M., Sharma, S. S., Jayashree, P. K. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 20, p. 41583-41590 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2016

Study on dual-phase structure of AISI4140 steel

Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In : Indian Journal of Science and Technology. 9, 33, 93526.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2019

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

2016

Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In : International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

Research output: Contribution to journalArticle

2017

Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2015

Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In : Tribology International. 92, p. 462-471 10 p., 3770.

Research output: Contribution to journalArticle

25 Citations (Scopus)
2019
1 Citation (Scopus)

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle