Find Research outputs

Zeeshan Hameed, B. M., Aiswarya Dhavileswarapu, V. L. S., Raza, S. Z., Karimi, H., Khanuja, H. S., Shetty, D. K., Ibrahim, S., Shah, M. J., Naik, N., Paul, R., Rai, B. P. & Somani, B. K., 01-05-2021, In: Journal of Clinical Medicine. 10, 9, 1864.

Research output: Contribution to journal › Review article › peer-review

Open Access

7 Citations (Scopus)

2018

Tensile fractography of artificially aged Al6061-B4C composites

Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

Research output: Contribution to journal › Article › peer-review

17 Citations (Scopus)

2021

Measuring routine childhood vaccination coverage in 204 countries and territories, 1980–2019: a systematic analysis for the Global Burden of Disease Study 2020, Release 1

GBD 2020, Release 1, Vaccine Coverage Collaborators, T, R. & Rao P P, J., 07-08-2021, In: The Lancet. 398, 10299, p. 503-521 19 p.

Research output: Contribution to journal › Article › peer-review

Open Access

22 Citations (Scopus)

Finite element analysis of hip implant with varying in taper neck lengths under static loading conditions

Chethan, K. N., Shyamasunder Bhat, N., Zuber, M. & Satish Shenoy, B., 09-2021, In: Computer Methods and Programs in Biomedicine. 208, 106273.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Infiltrating spinal angiolipoma with paraplegia and hydrocephalus: A rare case report

Velayudhan, D., Bhat, S. N. & Mohanty, S. P., 01-04-2021, In: Journal of Taibah University Medical Sciences.

Research output: Contribution to journal › Article › peer-review

Open Access

Steroid dependence in acute asthma due to myasthenia gravis

Shahul, H., Manu, M. & Mohapatra, A., 01-09-2021, In: Lung India. 38, 5, p. 496-498 3 p.

Research output: Contribution to journal › Letter › peer-review

Open Access

Mangifera Indica mid-rib fibers as reinforcements for CNSL-epoxy composites

Shenoy Heckadka, S., Nayak, S. Y. & Samant, R., 2021, (Accepted/In press) In: Journal of the Textile Institute.

Research output: Contribution to journal › Article › peer-review

2020

Experimental study with analytical validation of energy parameters in parabolic trough collector with twisted tape insert

Arunachala, U. C., 06-2020, In: Journal of Solar Energy Engineering, Transactions of the ASME. 142, 3, 4045825.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2021

Entropy Generation Minimization of Vapour Absorption Heat Transformer

Sekar, S., Chandrasekar, P., Kumar, S., Jospher, A. J. S., Sheeja, R., Valarmathi, T. N. & Lionus Leo, G. M., 2021, Theoretical, Computational, and Experimental Solutions to Thermo-Fluid Systems - Select Proceedings of ICITFES 2020. Palanisamy, M., Ramalingam, V. & Sivalingam, M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 265-274 10 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2018

Inhibiting action of N-Napthyl-Nl-Phenyl thiourea on the corrosion of 304 Ss In HCL medium

Shetty, N. & Herle, R., 01-02-2018, In: International Journal of Civil Engineering and Technology. 9, 2, p. 507-515 9 p.

Research output: Contribution to journal › Article › peer-review

Hemodynamics of Idealized Carotid Artery

Puritipati, C., Keri, V. & Kumar, N., 09-01-2018, In: MATEC Web of Conferences. 144, 01020.

Research output: Contribution to journal › Conference article › peer-review

Wear behaviour studies on Grewia Serrulata bast fibre reinforced polymer composites

Mahesha, G. T., Satish Shenoy, B., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-8 8 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2019

Heat Transfer Augmentation Using an Innovative Helicoidal Finned Absorber Plate in a Solar Air Heater-A Numerical Study

Purohit, S., Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-06-2019, In: Journal of Solar Energy Engineering, Transactions of the ASME. 141, 3, 031016.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2011

Comparison of flow in normal and stenosed carotid bulb

Khader, S. M. A., Pai, B. R., Ayachit, A., Rao, V. R. K. & Kamath, S. G., 29-09-2011, 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. p. 245-248 4 p. 6014889

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Dynamic characteristics of a single pad externally adjustable fluid film bearing

Shenoy, S. & Pai, R., 03-05-2011, In: Industrial Lubrication and Tribology. 63, 3, p. 146-151 6 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

2012

FSI simulation of common carotid under normal and high blood pressures

Abdul Khader, S. M., Ayachit, A., Pai, B. R., Rao, V. R. K. & Kamath, S. G., 03-12-2012, In: Advances in Mechanical Engineering. 2012, 140579.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2015

Effect of seawater on mechanical properties of GFRP with cement as filler material for fishing boat application

Shettar, M. & Hiremath, P., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 19, p. 40027-40030 4 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

2019

Use of alternative fuels in compression ignition engines: a review

Shivakumar & Dinesha, P., 01-05-2019, In: Biofuels. p. 1-11 11 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2016

Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2010

The effect of fuel volatility on droplet depletion rate and penetration of vaporizing fuel droplets in a gas turbine combustor

Sharma, N. Y., 29-11-2010, ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings. p. 82-86 5 p. 5598498

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2021

Effects of particle size of cerium oxide nanoparticles on the combustion behavior and exhaust emissions of a diesel engine powered by biodiesel/diesel blend

Dinesha, P., Kumar, S. & Rosen, M. A., 2021, In: Biofuel Research Journal. 8, 2, p. 1374-1383 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

11 Citations (Scopus)

2020

Cone beam computed tomography for mechanical characterization of Flax/Jute/Ultra high molecular weight polyethylene reinforced phenol formaldehyde composites: A comparative assessment

Shenoy Heckadka, S., Pai Ballambat, R., Kini Manjeshwar, V., Ravindranath, V., Hegde, P. & Kamath, A., 2020, In: Materials Today: Proceedings. 47, p. 6740-6745 6 p.

Research output: Contribution to journal › Conference article › peer-review

2021

Effect of CNT-Based Resin Modification on the Mechanical Properties of Polymer Composites

Nayak, S. Y., Shenoy, S., Hameed Sultan, M. T., Kini, C. R., Seth, A., Prabhu, S. & Safri, S. N. A., 29-01-2021, In: Frontiers in Materials. 7, 609010.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

2013

Comparative Study Of Blood Flow Through Normal And Stenosed Common Carotid Artery Using Fluid-Structure Interaction

Abdul Khader, S. M., Raghuvir Pai, B., Ayachit, A., Ahmed, K. A., Rao, V. R. K. & Ganesh Kamath, S., 2013, In: International Journal of Earth Sciences and Engineering. 6, 4, p. 866-871 6 p.

Research output: Contribution to journal › Article › peer-review

2021

A review of literature on single-bundle anterior cruciate ligament (ACL) reconstruction

Bhat, B. K., Adhikari, R. & Acharya, K. K. V., 04-06-2021, Advances in Health and Disease. Volume 39. Nova Science Publishers, Inc., p. 101-120 20 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter

RSM based expert system development for cutting force prediction during machining of Ti–6Al–4V under minimum quantity lubrication

Shetty, R., Kumar, C. R. S. & Ravindra, M. R., 2021, (Accepted/In press) In: International Journal of Systems Assurance Engineering and Management.

Research output: Contribution to journal › Article › peer-review

Open Access

2019

Disparity Maps Based Path Planning Algorithm for Autonomous Robot Navigation

Shetty, A. A., George, V. I., Nayak, C. G. & Shetty, R., 06-2019, Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019. Institute of Electrical and Electronics Engineers Inc., p. 669-675 7 p. 8821808. (Proceedings of the 3rd International Conference on Electronics and Communication and Aerospace Technology, ICECA 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Influence of seawater absorption on vibrational and tensile characteristics of quasi-isotropic glass/epoxy composites

Pavan, A., Dayananda, P., Vijaya, K. M., Hegde, S. & Narampady Hosagade, P., 01-01-2019, In: Journal of Materials Research and Technology. 8, 1, p. 1427-1433 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

12 Citations (Scopus)

Experimental investigation on silicon carbide reinforced Duralumin based mmc produced by cold compacting

Gowri Shankar, M. C., Shivaprakash, Y. M., Siddesh Kumar, N. M., Siddhartha, M. A. & Dutta, A., 01-04-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 507-524 18 p., IJMPERDAPR201949.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

2017

2D woven/ 3D orthogonal woven non-crimp e-glass fabric as reinforcement in epoxy composites using vacuum assisted resin infusion molding

Nayak, S. Y., Heckadka, S. S., Sadanand, R. V., Bharadwaj, K., Pokharna, H. M. & Sanjeev, A. R., 01-01-2017, In: Journal of Engineered Fibers and Fabrics. 12, 2, p. 12-19 8 p.

Research output: Contribution to journal › Article › peer-review

10 Citations (Scopus)

2018

Comparison of machinability of manganese alloyed austempered ductile iron produced using conventional and two step austempering processes

Hegde, A. & Sharma, S., 01-05-2018, In: Materials Research Express. 5, 5, 056519.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Eﬀect of posterior tibial slope and implant material on the bone-implant system following TKA: A finite element study

Baliga B, R., Pai B, R., Shenoy, S., Hegde K, A., Rao K, S., Swaroop, S. & Shetkar, A., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-10 10 p.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

2016

Effect of twisted tape inserts and stacks on internal cooling of gas turbine blades

Kini, C. R., Kamat, H. & Shenoy, B. S., 01-01-2016, In: Indian Journal of Science and Technology. 9, 31, 95978.

Research output: Contribution to journal › Article › peer-review

Open Access

6 Citations (Scopus)

2019

Analysis of drag and lift forces in different tailed ground effect vehicles

Hiremath, P., Shettar, M., Suhas Kowshik, C. S., Rajath, J. & Sukhesh, P. D., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1399-1412 14 p.

Research output: Contribution to journal › Article › peer-review

2020

Study of cycle time reduction and assembly process improvement for various electric stackers

Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

Research output: Contribution to journal › Article › peer-review

Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels

Gurumurthy, B. M., Gowrishankar, M. C., Sharma, S., Kini, A., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

Research output: Contribution to journal › Article › peer-review

Open Access

6 Citations (Scopus)

2021

Use of ureteric stent related mobile phone application (UROSTENTZ App) in COVID-19 for improving patient communication and safety: A prospective pilot study from a university hospital

Hameed, B. M. Z., Shah, M., Naik, N., Reddy, S. J. & Somani, B. K., 2021, In: Central European Journal of Urology. 74, 1, p. 51-56 6 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2011

Patient specific flow analysis of cerebral aneurysm using CFD

Vedula, R. R., Abdul Khader, S. M., Pai, R., Ayachit, A., Ahmad, K. A. & Shuaib, I. L., 01-12-2011, Proceedings of the 6th IASTED International Conference on Biomechanics, BioMech 2011. p. 82-86 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2018

Root cause analysis of rough conical seat grinding problem in fuel pump cylinder head by Shainin methodology

Kadam, S. S., Virupakshappa, N. M. & Achutha Kini, U., 09-01-2018, In: MATEC Web of Conferences. 144, 05009.

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

2013

Three dimensional CFD simulation of thermosyphon flow in an unglazed solar flat plate collector

Sharma, Y. N., Shivamallaiah, M. M. & Karanth, V. K., 01-01-2013, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers(ASME), Vol. 7 B.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2012

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2009

Maxillary protraction with and without maxillary expansion: A finite element analysis of sutural stresses

Gautam, P., Valiathan, A. & Adhikari, R., 01-09-2009, In: American Journal of Orthodontics and Dentofacial Orthopedics. 136, 3, p. 361-366 6 p.

Research output: Contribution to journal › Article › peer-review

25 Citations (Scopus)

Filters for Research output

Search results