Find Research outputs

Search results

• 2021

  Effects of particle size of cerium oxide nanoparticles on the combustion behavior and exhaust emissions of a diesel engine powered by biodiesel/diesel blend

  Dinesha, P., Kumar, S. & Rosen, M. A., 2021, In: Biofuel Research Journal. 8, 2, p. 1374-1383 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  11 Citations (Scopus)
• 2020

  Cone beam computed tomography for mechanical characterization of Flax/Jute/Ultra high molecular weight polyethylene reinforced phenol formaldehyde composites: A comparative assessment

  Shenoy Heckadka, S., Pai Ballambat, R., Kini Manjeshwar, V., Ravindranath, V., Hegde, P. & Kamath, A., 2020, In: Materials Today: Proceedings. 47, p. 6740-6745 6 p.

  Research output: Contribution to journal › Conference article › peer-review
• 2016

  Effect of process parameters on the surface roughness generated on graphite laced GFRP composite by AWJ machining

  Doreswamy, D., Eqbal, B., Sangolagi, S. & Devineni, A., 01-01-2016, In: International Journal of Abrasive Technology. 7, 4, p. 294-306 13 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2017

  Experimental evaluation of the chill casting method for the fabrication of LM-25 aluminum alloy-borosilicate glass (p) composites

  Hiremath, A. & Hemanth, J., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 69-73 5 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Experimental evaluation of the coefficient of thermal expansion of chilled aluminum alloy-borosilicate glass (P) composite

  Hiremath, A. & Hemanth, J., 01-01-2017, In: Journal of Materials and Environmental Science. 8, 12, p. 4246-4252 7 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2020

  Study on effect of water soaking conditions on properties and morphology of glass fiber-cement-polyester composites

  Shettara, M., Shettigara, P., Manjunathb, M. & Rao, U. S., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8697-8704 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)
• 2019

  An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

  Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In: Materials Today: Proceedings. 19, p. 307-311 5 p.

  Research output: Contribution to journal › Conference article › peer-review
  10 Citations (Scopus)
• 2020

  Influence of diethyl ether on the performance and emissions of a compression ignition engine fuelled with biodiesel

  Kapilan, N., Sadashiva Prabhu, S. & Vasudeva, M., 2020, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 74, 1, p. 45-56 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2018

  Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

  Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  4 Citations (Scopus)
• 2017

  Characterization of Laser Remelted Plasma-Sprayed Mo Coating on AISI 1020 Steel

  Manjunatha, S. S., Manjaiah, M. & Basavarajappa, S., 01-09-2017, In: Silicon. 9, 5, p. 741-751 11 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2022

  Finite element study on the influence of fiber orientation on the high velocity impact behavior of fiber reinforced polymer composites

  Stephen, C., Behara, S. R., Shivamurthy, B., Selvam, R., Kannan, S. & Abbadi, M., 06-2022, In: International Journal on Interactive Design and Manufacturing. 16, 2, p. 459-468 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)
• 2019

  Generalized optimization procedure for rotational magnetized direction permanent magnet thrust bearing configuration

  Bekinal, S. I., Doddamani, M., Vanarotti, M. & Jana, S., 01-04-2019, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233, 7, p. 2563-2573 11 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)
• 2021

  Micro-hardness variation of micro-phases during spheroidisation of AISI4340 steel

  Harisha, S. R., Sharma, S., Kini, A. U., Gurumurty, B. M. & Hegde, A., 2021, In: Cogent Engineering. 8, 1, 1875536.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Cryogenic machining of elastomers: a review

  Maurya, P., Vijay, G. S., Raghavendra Kamath, C. & Shivamurthy, B., 2021, (Accepted/In press) In: Machining Science and Technology.

  Research output: Contribution to journal › Review article › peer-review
  1 Citation (Scopus)
• 2018

  Experimental Investigation on Surface Quality and Dimensional Accuracy during Curvilinear Thin-Wall Machining

  Bolar, G., Mekonen, M., Das, A. & Joshi, S. N., 2018, In: Materials Today: Proceedings. 5, 2, p. 6461-6469 9 p.

  Research output: Contribution to journal › Conference article › peer-review
  6 Citations (Scopus)
• 2017

  Three-dimensional numerical modeling, simulation and experimental validation of milling of a thin-wall component

  Bolar, G. & Joshi, S. N., 01-04-2017, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 231, 5, p. 792-804 13 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)
• 2019

  Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

  Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  5 Citations (Scopus)
• 2010

  Elasto-hydrodynamic lubrication analysis of full 360° journal bearing using CFD and FSI techniques

  Shenoy, B. S., Pai, R., Rao, D. S. & Pai, R., 01-11-2010, In: World Journal of Modelling and Simulation. 6, 4, p. 315-320 6 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2014

  Perceived responsibilities and operational difficulties of anganwadi workers at a coastal south Indian city

  Tripathy, M., Kamath, S., Baliga, B. & Jain, A., 01-07-2014, In: Medical Journal of Dr. D.Y. Patil University. 7, 4, p. 468-472 5 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)
• 2021

  Effect of Marine Environmental Conditions on Physical and Mechanical Properties of Fiber-Reinforced Composites—A Review

  Mayya, H. B., Pai, D., Kini, V. M. & N H, P., 2021, (Accepted/In press) In: Journal of The Institution of Engineers (India): Series C.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  5 Citations (Scopus)

• Intensification of thermo-hydraulic and exergetic performance by wire matrix and wavy tape: An experimental study

  Varun, K. & Arunachala, U. C., 02-2021, In: International Communications in Heat and Mass Transfer. 121, 105124.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Recent developments in metal-free organic sensitizers derived from carbazole, triphenylamine, and phenothiazine for dye-sensitized solar cells

  Devadiga, D., Selvakumar, M., Shetty, P., Sridhar Santosh, M., Chandrabose, R. S. & Karazhanov, S., 2021, (Accepted/In press) In: International Journal of Energy Research.

  Research output: Contribution to journal › Review article › peer-review
  17 Citations (Scopus)

• Refractive index and formaldehyde sensing with silver nanocubes

  Hegde, H. R., Chidangil, S. & Sinha, R. K., 09-02-2021, In: RSC Advances. 11, 14, p. 8042-8050 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  7 Citations (Scopus)
• 2017

  A case of upper left extremity deep vein thrombosis with right side middle lobe syndrome

  Babu, S., Devasia, T., Karkal, Y. R. & Mohapatra, A., 01-07-2017, In: Tzu Chi Medical Journal. 29, 3, p. 180-182 3 p.

  Research output: Contribution to journal › Article › peer-review
• 2015

  Early diagnosis of tongue malignancy using laser induced fluorescence spectroscopy technique

  Patil, A., Unnikrishnan, V. K., Ongole, R., Pai, K. M., Kartha, V. B. & Chidangil, S., 01-01-2015, Clinical and Biomedical Spectroscopy and Imaging IV. SPIE, Vol. 9537. 95370J

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)
• 2013

  Salivary protein markers: A noninvasive protein profile-based method for the early diagnosis of oral premalignancy and malignancy

  Patil, A., Choudhari, K. S., Unnikrishnan, V. K., Shenoy, N., Ongole, R., Pai, K. M., Kartha, V. B. & Chidangil, S., 06-11-2013, In: Journal of Biomedical Optics. 18, 10, 101317.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)
• 2018

  Comparative study of femur bone having different boundary conditions and bone structure using finite element method

  Chethan, K. N., Zuber, M., Bhat, S. N. & Shenoy, S. B., 01-01-2018, In: Open Biomedical Engineering Journal. 12, 1, p. 115-134 20 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)
• 2015

  Ethionamide: Unusual cause of hypothyroidism

  Mallela, A. R., Koya, R., Nagari, S. K. & Mohapatra, A. K., 01-08-2015, In: Journal of Clinical and Diagnostic Research. 9, 8, p. OD08-OD09

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2011

  An analysis of clinicoradiological and histopathological correlation in tuberculosis of spine

  Mohanty, S. P., Shyamasunder Bhat, N. & Sreekumaran Nair, N., 01-03-2011, In: Journal of the Indian Medical Association. 109, 3, p. 161-165 5 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2019

  Minimally invasive plate osteosynthesis (MIPO) in AO/OTA type B displaced clavicle fractures

  Kundangar, R. S., Mohanty, S. P. & Bhat, N. S., 01-08-2019, In: Musculoskeletal Surgery. 103, 2, p. 191-197 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Delayed hypoglossal nerve palsy following occipital condyle fracture

  Sitaram, C. D., Nishanth, A., Bhat, S. N. & Kundangar, R. S., 02-12-2019, In: BMJ Case Reports. 12, 12, e232645.

  Research output: Contribution to journal › Article › peer-review
• 2017

  Use of tissue doppler imaging to detect right ventricular myocardial dysfunction in patients with chronic obstructive pulmonary disease

  Samanth, J., Padmakumar, R., Mohapatra, A., Krishnananda, N., Patil, N., Karthik Rao, N., Nayak, V., Balaji, O., Dipanjan, B. & Kotian, R., 01-01-2017, In: Asian Journal of Pharmaceutical and Clinical Research. 10, 6, p. 118-124 7 p.

  Research output: Contribution to journal › Article › peer-review
• 2018

  Finding Salmonella in unusual sites: look before you leap. A case series

  Anegundi, R., Banerjee, B., Mukhopadhyay, C., Nishanth, A. & Shyamasunder Bhat, N., 01-01-2018, In: Tropical Doctor.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2007

  Endometriosis presenting like a psoas abscess

  Bhat, S. N., Mohanty, S. P. & Kustagi, P., 01-12-2007, In: Saudi Medical Journal. 28, 6, p. 952-954 3 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2013

  Extrapulmonary multidrug resistant tuberculosis presenting as chest wall abscess -A rare case report

  Manu, M. K., Mohapatra, A. K. & Magazine, R., 07-06-2013, In: Indian Journal of Tuberculosis. 60, 2, p. 121-123 3 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)
• 2020

  Corrigendum to “Static structural analysis of different stem designs used in total hip arthroplasty using finite element method” (Heliyon (2019) 5(6), (S2405844019310035), (10.1016/j.heliyon.2019.e01767))

  Chethan, K. N., Zuber, M., Bhat, N. S., Shenoy, B. S. & R. Kini, C., 01-2020, In: Heliyon. 6, 1, e03080.

  Research output: Contribution to journal › Comment/debate › peer-review

  Open Access
• 2012

  Primary tubercular psoas abscess: A rare presentation

  Chawla, K., D'Souza, A., Shyamsunder Bhat, N. & Mukhopadhayay, C., 01-01-2012, In: Journal of Infection in Developing Countries. 6, 1, p. 86-88 3 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)
• 2020

  Influence of stepped cylindrical turbulence generators on the thermal enhancement factor of a flat plate solar air heater

  Antony, A. L., Shetty, S. P., Madhwesh, N., Yagnesh Sharma, N. & Vasudeva Karanth, K., 01-03-2020, In: Solar Energy. 198, p. 295-310 16 p.

  Research output: Contribution to journal › Article › peer-review
  24 Citations (Scopus)
• 2021

  Experimental investigations and empirical relationship on the influence of innovative hub geometry in a centrifugal fan for performance augmentation

  Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 12-2021, In: International Journal of Mechanical and Materials Engineering. 16, 1, 5.

  Research output: Contribution to journal › Article › peer-review

  Open Access
• 2017

  Fatigue life prediction of aluminum alloy 6061-T6 using continuum damage mechanics

  Kamath, T. R., Upadhyaya, Y. S. & Kaushik, D., 01-03-2017, In: Advanced Science Letters. 23, 3, p. 1914-1916 3 p.

  Research output: Contribution to journal › Article › peer-review
• 2018

  Study of a supply chain system with the presence of bullwhip effect

  Shrivastava, A., Kamath, R., Sharma, H. & Gogoi, A., 09-01-2018, In: MATEC Web of Conferences. 144, 05003.

  Research output: Contribution to journal › Conference article › peer-review
• 2010

  Scaling effect of direct solar hot water systems on energy efficiency

  Arunachala, U. C., Bhatt, M. S. & Sreepathi, L. K., 01-12-2010, In: Journal of Solar Energy Engineering, Transactions of the ASME. 132, 4, 041012.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)
• 2018

  Machinability study of manganese alloyed austempered ductile iron

  Hegde, A. & Sharma, S., 01-07-2018, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40, 7, 338.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)
• 2017

  Investigating the inhibiting action of thiourea derivative on mild steel corrosion in acid medium

  Divakara Shetty, S., Shetty, N., Parvaz, F., Agnihotri, K. & Mewawala, P., 01-01-2017, In: International Journal of Applied Engineering Research. 12, 12, p. 3237-3242 6 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)
• 2018

  Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

  Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Optimization of Microbial Leaching of Base Metals from a South African Sulfidic Nickel Ore Concentrate by Acidithiobacillus ferrooxidans

  Behera, S. K., Manjaiah, M., Sekar, S., Panda, S. K., Mavumengwana, V. & Mulaba-Bafubiandi, A. F., 03-07-2018, In: Geomicrobiology Journal. 35, 6, p. 447-459 13 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Effect of hybridization on the mechanical properties of chopped strand mat/pineapple leaf fibre reinforced polyester composites

  Nayak, S. Y., Heckadka, S. S., Amin, N. M., Sadanand, R. V. & Thomas, L. G., 26-02-2018, In: MATEC Web of Conferences. 153, 01006.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)
• 2010

  The inhibition action of ethyl-2-phenyl hydrozono-3-oxobutyrate on the corrosion of 6061 Al alloy/SiCp composite in hydrochloric acid medium

  Kini, U. A., Shetty, P., Shetty, S. D., Isloor, A. & Herle, R., 01-01-2010, In: Journal of the Chilean Chemical Society. 55, 1, p. 56-60 5 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)
• 2013

  Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites

  Shivamurthy, B., Udaya Bhat, K. & Anandhan, S., 01-01-2013, In: Materials and Design. 44, p. 136-143 8 p.

  Research output: Contribution to journal › Article › peer-review
  56 Citations (Scopus)
• 2012

  Experimental investigation of the effect of process parameters on machining of GFRP composites using Abrasive Water Suspension Jet submerged in water

  Deepak, D. & Devineni, A., 01-12-2012, BHR Group - 21st International Conference on Water Jetting: Looking to the Future, Learning from the Past. p. 25-33 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution