|
Search concepts
|
|
Selected filters
|
- 25,600 - 25,650 out of 26,752 results
Search results
-
2009
A comparison of stress distribution and flexion among various designs of bar attachments for implant overdentures: A three dimensional finite element analysis
Prakash, V., D'Souza, M. & Adhikari, R., 01-01-2009, In: Indian Journal of Dental Research. 20, 1, p. 31-36 6 p.Research output: Contribution to journal › Article › peer-review
13 Citations (Scopus) -
2013
Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites
Shivamurthy, B., Udaya Bhat, K. & Anandhan, S., 01-01-2013, In: Materials and Design. 44, p. 136-143 8 p.Research output: Contribution to journal › Article › peer-review
56 Citations (Scopus) -
2018
Experimental study on the thermoacoustic refrigeration unit using metal rod as a resonator tube
Arunkumar, H. S., Manoj, A., Jayadev, M. & Natarajan, V., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 440-446 7 p.Research output: Contribution to journal › Article › peer-review
-
Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments
Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.Research output: Contribution to journal › Conference article › peer-review
8 Citations (Scopus) -
2020
Surface properties of epoxy clay nanocomposite coating
Muralishwara, K., Kini, U. A. & Sharma, S., 2020, In: Materials Today: Proceedings. 38, p. 2725-2731 7 p.Research output: Contribution to journal › Conference article › peer-review
Open Access3 Citations (Scopus) -
2021
Regimes of hydrochar yield from hydrothermal degradation of various lignocellulosic biomass: A review
Khan, N., Mohan, S. & Dinesha, P., 15-03-2021, In: Journal of Cleaner Production. 288, 125629.Research output: Contribution to journal › Review article › peer-review
16 Citations (Scopus) -
2022
Quenchant oil viscosity and tempering temperature effect on mechanical properties of 42CrMo4 steel
Laxmi, B., Sharma, S., PK, J. & Hegde, A., 01-01-2022, In: Journal of Materials Research and Technology. 16, p. 581-587 7 p.Research output: Contribution to journal › Article › peer-review
Open Access2 Citations (Scopus) -
Optimization of the Parameters Influencing the Control of Dual-Phase AISI1040 Steel Corrosion in Sulphuric Acid Solution with Pectin as Inhibitor Using Response Surface Methodology
Prabhu, D., Hiremath, P., Prabhu, P. R. & Gowrishankar, M. C., 04-2022, In: Protection of Metals and Physical Chemistry of Surfaces. 58, 2, p. 394-413 20 p.Research output: Contribution to journal › Article › peer-review
-
2021
Pathogenesis of atherosclerosis and its influence on local hemodynamics: A comparative FSI study in healthy and mildly stenosed carotid arteries
Bantwal, A., Singh, A., Menon, A. R. & Kumar, N., 01-10-2021, In: International Journal of Engineering Science. 167, 103525.Research output: Contribution to journal › Article › peer-review
-
2018
Effect of hybridization on the mechanical properties of chopped strand mat/pineapple leaf fibre reinforced polyester composites
Nayak, S. Y., Heckadka, S. S., Amin, N. M., Sadanand, R. V. & Thomas, L. G., 26-02-2018, In: MATEC Web of Conferences. 153, 01006.Research output: Contribution to journal › Conference article › peer-review
2 Citations (Scopus) -
2021
A review on strengthening, delamination formation and suppression techniques during drilling of CFRP composites
Rathod, D., Rathod, M., Patel, R., Shahabaz, S. M., Shetty, S. D. & Shetty, N., 2021, In: Cogent Engineering. 8, 1, 1941588.Research output: Contribution to journal › Review article › peer-review
Open Access -
2018
Multi-objective optimization of stacked radial passive magnetic bearing
Lijesh, K. P., Doddamani, M., Bekinal, S. I. & Muzakkir, S. M., 01-09-2018, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 232, 9, p. 1140-1159 20 p.Research output: Contribution to journal › Article › peer-review
12 Citations (Scopus) -
2022
Effects of Innovative Suction Slots on the Performance of a Radial Bladed Impeller of a Centrifugal Blower - A Numerical Transient Analysis
Madhwesh, N. & Karanth, K. V., 2022, In: Engineered Science. 17, p. 91-100 10 p.Research output: Contribution to journal › Article › peer-review
Open Access -
Impact of equal channel angular pressing on aluminium alloys: An overview
Awasthi, A., Sathish Rao, U., Saxena, K. K. & Dwivedi, R. K., 2022, (Accepted/In press) In: Materials Today: Proceedings.Research output: Contribution to journal › Article › peer-review
-
MACHINABILITY STUDY AND OPTIMIZATION OF TOOL LIFE AND SURFACE ROUGHNESS OF FERRITE - BAINITE DUAL PHASE STEEL
Hegde, A., Hindi, J., Gurumurthy, B. M., Sharma, S. & Ki, A., 2022, In: Journal of Applied Engineering Science. 20, 2, p. 358-364 7 p.Research output: Contribution to journal › Article › peer-review
Open Access -
2012
Evaluation of effectiveness of wavelet based denoising schemes using ANN and SVM for bearing condition classification
Vijay, G. S., Kumar, H. S., Srinivasa, P. P., Sriram, N. S. & Rao, R. B. K. N., 26-12-2012, In: Computational Intelligence and Neuroscience. 2012, 582453.Research output: Contribution to journal › Article › peer-review
22 Citations (Scopus) -
2019
Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites
Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In: International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.Research output: Contribution to journal › Article › peer-review
-
2018
Investigations into the Flow Behavior in a Nonparallel Shrouded Diffuser of a Centrifugal Fan for Augmented Performance
Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 01-08-2018, In: Journal of Fluids Engineering, Transactions of the ASME. 140, 8, 081103.Research output: Contribution to journal › Article › peer-review
5 Citations (Scopus) -
2008
Lamellar lubrication in vivo and vitro: Friction testing of hexagonal boron nitride
Pawlak, Z., Pai, R., Bayraktar, E., Kaldonski, T. & Oloyede, A., 01-12-2008, In: BioSystems. 94, 3, p. 202-208 7 p.Research output: Contribution to journal › Article › peer-review
29 Citations (Scopus) -
2021
Stability enhancement in large diameter rectangular natural circulation loops using flow restrictors
Elton, D. N., Arunachala, U. C. & Vijayan, P. K., 07-2021, In: International Communications in Heat and Mass Transfer. 126, 105412.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
Effects of temperature and turbulence on characteristics and morphological variations of urea deposits in urea-SCR systems. A study using SEM and XRD
Sadashiva, P. S., Natesan, K. & Nayak, N. S., 2021, In: International Review of Mechanical Engineering. 15, 4, p. 219-227 9 p.Research output: Contribution to journal › Article › peer-review
-
Investigation on the influence of Lead Zirconate Titanate piezo material on different diaphragm materials in the mechanical deformation process
Kandarkar, P., Sathish Rao, U. & Kamoji, A., 2021, In: Materials Today: Proceedings. 47, p. 3251-3255 5 p.Research output: Contribution to journal › Conference article › peer-review
-
2013
Regression analysis and ANN models to predict rock properties from sound levels produced during drilling
Rajesh Kumar, B., Vardhan, H., Govindaraj, M. & Vijay, G. S., 01-02-2013, In: International Journal of Rock Mechanics and Mining Sciences. 58, p. 61-72 12 p.Research output: Contribution to journal › Article › peer-review
48 Citations (Scopus) -
2016
Influence of process parameters on material removal rate and surface roughness in WED-machining of Ti50Ni40Cu10 shape memory alloy
Manjaiah, M., Narendranath, S., Basavarajappa, S. & Gaitonde, V. N., 01-01-2016, In: International Journal of Machining and Machinability of Materials. 18, 1-2, p. 36-53 18 p.Research output: Contribution to journal › Article › peer-review
16 Citations (Scopus) -
2018
Performance of an automotive car radiator operated with nanofluid-based coolant
Kumar, S., Dinesha, P., Gaggad, A. & Mehrotra, K., 01-01-2018, In: Heat Transfer Research. 49, 16, p. 1527-1543 17 p.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
2019
An investigation into tapping of Al6061/SiC metal matrix composite with straight flute HSS machine tap
Nagaraja, Adhikari, R. & Yasir, T., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4575-4595 21 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
2016
PIV measurement of mildly controlled flow over a straight-wing model
Salunkhe, P., Tang, H., Zheng, Y. & Wu, Y., 01-12-2016, In: International Journal of Heat and Fluid Flow. 62, p. 552-559 8 p.Research output: Contribution to journal › Article › peer-review
3 Citations (Scopus) -
2015
Impact of process parameters on surface roughness in elastomer machining
Nayak, R. & Shetty, R., 2015, In: International Journal of Applied Engineering Research. 10, 78 Special Issue, p. 13-17 5 p.Research output: Contribution to journal › Article › peer-review
-
2017
Numerical investigation of chip formation during machining of elastomers and estimation of cutting force
Nayak, R., Keni, L. & Shetty, R., 01-11-2017, In: International Review of Mechanical Engineering. 11, 11, p. 877-882 6 p.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
2018
Influence of functionalized multi-walled carbon nanotubes on the mechanical properties and delamination in drilling of CFRP composites
Suman, S., Alva, P. P., Daniel, N. G. & Shetty, N., 30-06-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 3, p. 1067-1084 18 p.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
Lithium-Ion Battery Management System: A Lifecycle Evaluation Model for the Use in the Development of Electric Vehicles
Sisodia, A. & Monteiro, J., 09-01-2018, In: MATEC Web of Conferences. 144, 04020.Research output: Contribution to journal › Conference article › peer-review
3 Citations (Scopus) -
2020
Quantifying the performance advantage of using passive solar air heater with chimney for photovoltaic module cooling
Chandavar, A. U., 2020, (Accepted/In press) In: International Journal of Energy Research.Research output: Contribution to journal › Article › peer-review
2 Citations (Scopus) -
2015
Parametric analysis of an annular finned tube for heat transfer and fluid flow - A CFD study
Nakulsreedhar & Satviksathyanathan, 01-01-2015, In: International Journal of Applied Engineering Research. 10, 21, p. 42404-42409 6 p.Research output: Contribution to journal › Article › peer-review
-
2021
Thermodynamics, adsorption, and response surface methodology investigation of the corrosion inhibition of aluminum by Terminalia chebula Ritz. extract in H3PO4
Prabhu, D., Prabhu, P. R. & Rao, P., 01-02-2021, In: Chemical Papers.Research output: Contribution to journal › Article › peer-review
Open Access9 Citations (Scopus) -
Phenomenological model of urea water solution dosage strategy for urea-selective catalytic reduction systems
Sadashiva Prabhu, S., Nayak, N. S. & Natesan, K., 01-10-2021, In: Rasayan Journal of Chemistry. 14, 4, p. 2486-2498 13 p.Research output: Contribution to journal › Article › peer-review
Open Access -
2017
Three-Dimensional Finite Element Based Numerical Simulation of Machining of Thin-Wall Components with Varying Wall Constraints
Joshi, S. N. & Bolar, G., 01-06-2017, In: Journal of The Institution of Engineers (India): Series C. 98, 3, p. 343-352 10 p.Research output: Contribution to journal › Article › peer-review
15 Citations (Scopus) -
2020
Simulation of mechanical behaviour of materials using constant boundary elements-a discussion on the accuracy of results for bars
Kirana Kumara, P., 2020, Innovative Engineering Materials and Technologies - Selected peer-reviewed full text papers from 5th International Conference on Smart Engineering Materials, ICSEM 2020 and 4th International Conference on Innovative Engineering Materials, ICIEM 2020. Zhukov, A. (ed.). Trans Tech Publications Ltd, p. 99-105 7 p. (Materials Science Forum; vol. 1013 MSF).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
2014
Experimental study with analytical validation of thermally driven flow in risers of solar water heaters under varying scale thickness and heat flux
Arunachala, U. C., Siddhartha Bhatt, M. & Sreepathi, L. K., 01-05-2014, In: Journal of Solar Energy Engineering, Transactions of the ASME. 136, 2, 021018.Research output: Contribution to journal › Article › peer-review
1 Citation (Scopus) -
2022
Dynamic performance and stability characteristics of a multi pad externally adjustable fluid film bearing
Girish H, H. & Pai, R., 2022, (Accepted/In press) In: Australian Journal of Mechanical Engineering.Research output: Contribution to journal › Article › peer-review
-
2014
Selection of mother wavelet for effective wavelet transform of bearing vibration signals
Kumar, H. S., Pai, S. P., Sriram, N. S. & Vijay, G. S., 01-01-2014, Advanced Manufacturing and Automation. Trans Tech Publications Ltd, p. 169-176 8 p. (Advanced Materials Research; vol. 1039).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
13 Citations (Scopus) -
2017
Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites
Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
2020
Dynamic characteristics of drilling spindle supported by radial permanent magnet bearings
Chalageri, G. R., Bekinal, S. I. & Doddamani, M., 13-05-2020, In: Materials Today: Proceedings. 28, p. 2190-2196 7 p.Research output: Contribution to journal › Conference article › peer-review
-
2018
Numerical study of the influence of design parameters on heat transfer in a helically coiled heat exchanger
Kumar, S. & Dinesha, P., 01-01-2018, In: Heat Transfer Research. 49, 15, p. 1431-1443 13 p.Research output: Contribution to journal › Article › peer-review
6 Citations (Scopus) -
1992
Stability of submerged four-lobe oil journal bearings under dynamic load
Pai, R. & Majumdar, B. C., 15-04-1992, In: Wear. 154, 1, p. 95-108 14 p.Research output: Contribution to journal › Article › peer-review
7 Citations (Scopus) -
2019
Evaluation of physico-mechanical characteristics of cashew nut shell liquid-epoxy composites with Borassus and Tamarind fruit fibres as reinforcements
Nayak, S. Y., Shenoy Heckadka, S. & Thomas, L. G., 03-04-2019, In: Journal of Natural Fibers. 16, 3, p. 328-341 14 p.Research output: Contribution to journal › Article › peer-review
10 Citations (Scopus) -
Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing
Hariharan, G. & Pai, R., 12-08-2019, In: Industrial Lubrication and Tribology. 71, 6, p. 803-809 7 p.Research output: Contribution to journal › Article › peer-review
8 Citations (Scopus) -
2022
Numerical Analysis of Heat Transfer Enhancement of Solar Air Heater using Discrete Triangle Wave Corrugations
Sharma, V. R., S, S. S., Fernandes, D. V. & M S, M., 2022, In: Cogent Engineering. 9, 1, 2051312.Research output: Contribution to journal › Article › peer-review
Open Access -
2021
Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual-phase steel with ferrite-martensite structure in 0.5 M H2SO4 using pectin as inhibitor
Prabhu, P. R., Hiremath, P., Prabhu, D., Gowrishankar, M. C. & Gurumurthy, B. M., 2021, (Accepted/In press) In: Chemical Papers.Research output: Contribution to journal › Article › peer-review
Open Access1 Citation (Scopus) -
2020
Trade-off between wire matrix and twisted tape: SOLTRACE® based indoor study of parabolic trough collector
Varun, K., Arunachala, U. C. & Elton, D. N., 08-2020, In: Renewable Energy. 156, p. 478-492 15 p.Research output: Contribution to journal › Article › peer-review
11 Citations (Scopus) -
2021
Nanoparticles Filled Polymer Nanocomposites: A Technological Review
Hiremath, A., Murthy, A. A., Thipperudrappa, S. & Bharath, K. N., 2021, In: Cogent Engineering. 8, 1, 1991229.Research output: Contribution to journal › Article › peer-review
Open Access