Find Research outputs

Divakara Shetty, S., Shetty, N., Parvaz, F., Agnihotri, K. & Mewawala, P., 01-01-2017, In: International Journal of Applied Engineering Research. 12, 12, p. 3237-3242 6 p.

Research output: Contribution to journal › Article › peer-review

4 Citations (Scopus)

2018

Behavioral study of mechanical properties of glass fiber-epoxy composites under moisture absorption

Kini, U. A., Shettar, M., Sharma, S. & Hiremath, P., 01-07-2018, In: International Journal of Mechanical Engineering and Technology. 9, 7, p. 1-5 5 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Optimization of Microbial Leaching of Base Metals from a South African Sulfidic Nickel Ore Concentrate by Acidithiobacillus ferrooxidans

Behera, S. K., Manjaiah, M., Sekar, S., Panda, S. K., Mavumengwana, V. & Mulaba-Bafubiandi, A. F., 03-07-2018, In: Geomicrobiology Journal. 35, 6, p. 447-459 13 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Effect of hybridization on the mechanical properties of chopped strand mat/pineapple leaf fibre reinforced polyester composites

Nayak, S. Y., Heckadka, S. S., Amin, N. M., Sadanand, R. V. & Thomas, L. G., 26-02-2018, In: MATEC Web of Conferences. 153, 01006.

Research output: Contribution to journal › Conference article › peer-review

2 Citations (Scopus)

2010

The inhibition action of ethyl-2-phenyl hydrozono-3-oxobutyrate on the corrosion of 6061 Al alloy/SiCp composite in hydrochloric acid medium

Kini, U. A., Shetty, P., Shetty, S. D., Isloor, A. & Herle, R., 01-01-2010, In: Journal of the Chilean Chemical Society. 55, 1, p. 56-60 5 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

2013

Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites

Shivamurthy, B., Udaya Bhat, K. & Anandhan, S., 01-01-2013, In: Materials and Design. 44, p. 136-143 8 p.

Research output: Contribution to journal › Article › peer-review

56 Citations (Scopus)

2012

Experimental investigation of the effect of process parameters on machining of GFRP composites using Abrasive Water Suspension Jet submerged in water

Deepak, D. & Devineni, A., 01-12-2012, BHR Group - 21st International Conference on Water Jetting: Looking to the Future, Learning from the Past. p. 25-33 9 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2014

Experimental analysis of cardanol biofuel as an alternative fuel for diesel engines with air-side oxygen enrichment

Dinesha, P., Nayak, V., Kumar, D. & Mohanan, P., 01-01-2014, Dynamics of Machines and Mechanisms, Industrial Research. Trans Tech Publications Ltd, p. 1549-1553 5 p. (Applied Mechanics and Materials; vol. 592-594).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2019

Modeling and optimization of tannase production with Triphala in packed bed reactor by response surface methodology, genetic algorithm, and artificial neural network

Selvaraj, S., Vytla, R. M., Vijay, G. S. & Natarajan, K., 01-07-2019, In: 3 Biotech. 9, 7, 259.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

2017

Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

Research output: Contribution to journal › Article › peer-review

18 Citations (Scopus)

2019

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In: Materials Research Express. 6, 8, 082007.

Research output: Contribution to journal › Review article › peer-review

12 Citations (Scopus)

2020

Simulation of mechanical behaviour of materials using constant boundary elements-a discussion on the accuracy of results for bars

Kirana Kumara, P., 2020, Innovative Engineering Materials and Technologies - Selected peer-reviewed full text papers from 5th International Conference on Smart Engineering Materials, ICSEM 2020 and 4th International Conference on Innovative Engineering Materials, ICIEM 2020. Zhukov, A. (ed.). Trans Tech Publications Ltd, p. 99-105 7 p. (Materials Science Forum; vol. 1013 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2022

Numerical Analysis of Heat Transfer Enhancement of Solar Air Heater using Discrete Triangle Wave Corrugations

Sharma, V. R., S, S. S., Fernandes, D. V. & M S, M., 2022, In: Cogent Engineering. 9, 1, 2051312.

Research output: Contribution to journal › Article › peer-review

Open Access

2021

Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual-phase steel with ferrite-martensite structure in 0.5 M H₂SO₄ using pectin as inhibitor

Prabhu, P. R., Hiremath, P., Prabhu, D., Gowrishankar, M. C. & Gurumurthy, B. M., 2021, (Accepted/In press) In: Chemical Papers.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Thermodynamics, adsorption, and response surface methodology investigation of the corrosion inhibition of aluminum by Terminalia chebula Ritz. extract in H₃PO₄

Prabhu, D., Prabhu, P. R. & Rao, P., 01-02-2021, In: Chemical Papers.

Research output: Contribution to journal › Article › peer-review

Open Access

9 Citations (Scopus)

Phenomenological model of urea water solution dosage strategy for urea-selective catalytic reduction systems

Sadashiva Prabhu, S., Nayak, N. S. & Natesan, K., 01-10-2021, In: Rasayan Journal of Chemistry. 14, 4, p. 2486-2498 13 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2017

Three-Dimensional Finite Element Based Numerical Simulation of Machining of Thin-Wall Components with Varying Wall Constraints

Joshi, S. N. & Bolar, G., 01-06-2017, In: Journal of The Institution of Engineers (India): Series C. 98, 3, p. 343-352 10 p.

Research output: Contribution to journal › Article › peer-review

15 Citations (Scopus)

2014

Experimental study with analytical validation of thermally driven flow in risers of solar water heaters under varying scale thickness and heat flux

Arunachala, U. C., Siddhartha Bhatt, M. & Sreepathi, L. K., 01-05-2014, In: Journal of Solar Energy Engineering, Transactions of the ASME. 136, 2, 021018.

Research output: Contribution to journal › Article › peer-review

1 Citation (Scopus)

2022

Dynamic performance and stability characteristics of a multi pad externally adjustable fluid film bearing

Girish H, H. & Pai, R., 2022, (Accepted/In press) In: Australian Journal of Mechanical Engineering.

Research output: Contribution to journal › Article › peer-review

2014

Selection of mother wavelet for effective wavelet transform of bearing vibration signals

Kumar, H. S., Pai, S. P., Sriram, N. S. & Vijay, G. S., 01-01-2014, Advanced Manufacturing and Automation. Trans Tech Publications Ltd, p. 169-176 8 p. (Advanced Materials Research; vol. 1039).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

13 Citations (Scopus)

2019

Analysis on the steady state performance of a multi pad externally adjustable fluid film bearing

Hariharan, G. & Pai, R., 12-08-2019, In: Industrial Lubrication and Tribology. 71, 6, p. 803-809 7 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

2020

Trade-off between wire matrix and twisted tape: SOLTRACE® based indoor study of parabolic trough collector

Varun, K., Arunachala, U. C. & Elton, D. N., 08-2020, In: Renewable Energy. 156, p. 478-492 15 p.

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

2021

Nanoparticles Filled Polymer Nanocomposites: A Technological Review

Hiremath, A., Murthy, A. A., Thipperudrappa, S. & Bharath, K. N., 2021, In: Cogent Engineering. 8, 1, 1991229.

Research output: Contribution to journal › Article › peer-review

Open Access

2017

Performance comparison of phase change materials for thermal energy storage

Korody, J. & Dinesha, P., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 231-236 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2011

Artificial Neural Network based prediction of performance and emission characteristics of a variable compression ratio CI engine using WCO as a biodiesel at different injection timings

Shivakumar, Srinivasa Pai, P. & Shrinivasa Rao, B. R., 01-01-2011, In: Applied Energy. 88, 7, p. 2344-2354 11 p.

Research output: Contribution to journal › Article › peer-review

158 Citations (Scopus)

2017

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2 Citations (Scopus)

2010

Numerical analysis of electrokinetic interaction between a colloidal particle and a planar wall

Fernandes, D. V., Kang, S. & Suh, Y. K., 2010, Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009. p. 243-249 7 p. (Proceedings of the ASME Micro/Nanoscale Heat and Mass Transfer International Conference 2009, MNHMT2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2021

A Study on the Effect of Radiometric Variations on A Fuzzy Stereo Matching Algorithm: A Statistical Analysis

Shetty, A. A., Shetty, R., Hegde, N. T., Vaz, A. C. & Srinivasan, C. R., 2021, In: Engineered Science. 16, p. 269-280 12 p.

Research output: Contribution to journal › Article › peer-review

Investigation on the performance of LDDS using biomass-based wood shaving as the packing material

Suranjan Salins, S., Reddy, S. V. K., Kumar, S. & Kumar, S. S., 2021, (Accepted/In press) In: International Journal of Sustainable Energy.

Research output: Contribution to journal › Article › peer-review

2022

Experimental Analysis of Viscoelastic Properties of Room Temperature Vulcanized Silicone based Magnetorheological Elastomer

Bhaktha, S., Hegde, S. & Rao, S. U., 05-01-2022, In: Defence Science Journal. 72, 1, p. 98-104 7 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2021

CFD Analysis on Effect of Angulation in A Healthy Abdominal Aorta-Renal Artery Junction

Hegde, P., Shenoy, B. G., Khader, S. M. A., Pai, B. R., Rao, D. S., Tamagawa, M., Prabhu, R., Kumar, N. & Ahmad, K. A., 12-2021, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 88, 1, p. 149-165 17 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2022

Effect of Machining Parameters on Tool Life and Surface Roughness of AISI 1040 Dual Phase Steel

Gurumurthy, B. M., Hindi, J., Hegde, A., Sharma, S. & Kini, A., 2022, In: Materials Research. 25, e20210351.

Research output: Contribution to journal › Article › peer-review

Open Access

Ureterdynamic Analysis of Multiple Peristaltic Waves on Variable Diameter Ureter

Keni, L. G., Hayoz, M. J., Shenoy, S. B., Hegde, P., Prakashini, K., Tamagawa, M., Khader, S. M. A. & Zuber, M., 2022, In: Engineered Science. 17, p. 256-265 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Improved energy conversion of a photovoltaic module-thermoelectric generator hybrid system with different cooling techniques: Indoor and outdoor performance comparison

Chandan, D., Arunachala, U. C. & Varun, K., 10-06-2022, In: International Journal of Energy Research. 46, 7, p. 9498-9520 23 p.

Research output: Contribution to journal › Article › peer-review

2020

Optimisation of process parameters for minimising the surface roughness during wire-electrical discharge machining (WEDM) of silicon particle reinforced al6061 composite

Deepak, D. & Rajendra, B., 06-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 3, p. 851-860 10 p., IJMPERDJUN202076.

Research output: Contribution to journal › Article › peer-review

Open Access

2021

Analysis of the inhibiting action of pectin on corrosion of AISI1040 dual-phase steel with ferrite–martensite and ferrite–bainite structure: a comparison in 0.5 M sulphuric acid

Prabhu, D., Sharma, S., Prabhu, P. R., Jomy, J. & Sadanand, R. V., 2021, (Accepted/In press) In: Journal of the Iranian Chemical Society.

Research output: Contribution to journal › Article › peer-review

Open Access

Filters for Research output

Search results