Find Research outputs

Vedula, R. R., Abdul Khader, S. M., Pai, R., Ayachit, A., Ahmad, K. A. & Shuaib, I. L., 01-12-2011, Proceedings of the 6th IASTED International Conference on Biomechanics, BioMech 2011. p. 82-86 5 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2018

Root cause analysis of rough conical seat grinding problem in fuel pump cylinder head by Shainin methodology

Kadam, S. S., Virupakshappa, N. M. & Achutha Kini, U., 09-01-2018, In: MATEC Web of Conferences. 144, 05009.

Research output: Contribution to journal › Conference article › peer-review

1 Citation (Scopus)

2013

Three dimensional CFD simulation of thermosyphon flow in an unglazed solar flat plate collector

Sharma, Y. N., Shivamallaiah, M. M. & Karanth, V. K., 01-01-2013, Fluids Engineering Systems and Technologies. American Society of Mechanical Engineers(ASME), Vol. 7 B.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2012

Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2009

Maxillary protraction with and without maxillary expansion: A finite element analysis of sutural stresses

Gautam, P., Valiathan, A. & Adhikari, R., 01-09-2009, In: American Journal of Orthodontics and Dentofacial Orthopedics. 136, 3, p. 361-366 6 p.

Research output: Contribution to journal › Article › peer-review

25 Citations (Scopus)

2017

A computational fluid dynamics study of combustion and emission performance in an annular combustor of a jet engine

Zuber, M., Hisham, M. S. B., Nasir, N. A. M., Basri, A. A. & Khader, S. M. A., 01-07-2017, In: Pertanika Journal of Science and Technology. 25, 3, p. 1019-1028 10 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2016

Preparation of Unidirectional Grewia Serrulata Fiber-Reinforced Polyester Composites and Evaluation of Tensile and Flexural Properties

Mahesha, G. T., Satish, S. B., Vijaya, K. M. & Bhat, K. S., 02-09-2016, In: Journal of Natural Fibers. 13, 5, p. 547-554 8 p.

Research output: Contribution to journal › Article › peer-review

19 Citations (Scopus)

2017

Recent developments of axial flow compressors under transonic flow conditions

Srinivas, G., Raghunandana, K. & Satish Shenoy, B., 01-01-2017, In: IOP Conference Series: Materials Science and Engineering. 197, 1, 012078.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2007

Insurance sector dynamics: Towards transformation into learning organization

Barkur, G., Varambally, K. V. M. & Rodrigues, L. L. R., 03-10-2007, In: Learning Organization. 14, 6, p. 510-523 14 p.

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

2005

Cybernetics of engineering competence-pool development & deployment: Simulation based implications

Rodrigues, L. L. R. & Martis, M. S., 01-01-2005, 3rd International Conference on Education and Information Systems: Technologies and Applications, EISTA 2005, Proceedings. International Institute of Informatics and Systemics, IIIS, Vol. 1. p. 138-143 6 p.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

2020

Influence of diethyl ether on the performance and emissions of a compression ignition engine fuelled with biodiesel

Kapilan, N., Sadashiva Prabhu, S. & Vasudeva, M., 2020, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 74, 1, p. 45-56 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2021

Morphology and wear of high chromium and austempered ductile iron balls as grinding media in ball mills

Murthy, B. R. N. & Rangappa, R., 17-11-2021, In: Journal of Physics: Conference Series. 2070, 1, 012201.

Research output: Contribution to journal › Conference article › peer-review

Open Access

2022

Finite element study on the influence of fiber orientation on the high velocity impact behavior of fiber reinforced polymer composites

Stephen, C., Behara, S. R., Shivamurthy, B., Selvam, R., Kannan, S. & Abbadi, M., 06-2022, In: International Journal on Interactive Design and Manufacturing. 16, 2, p. 459-468 10 p.

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

2019

Generalized optimization procedure for rotational magnetized direction permanent magnet thrust bearing configuration

Bekinal, S. I., Doddamani, M., Vanarotti, M. & Jana, S., 01-04-2019, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 233, 7, p. 2563-2573 11 p.

Research output: Contribution to journal › Article › peer-review

7 Citations (Scopus)

2002

Energy and exergy balance in the process of spray combustion in a gas turbine combustor

Som, S. K. & Sharma, N. Y., 10-2002, In: Journal of Heat Transfer. 124, 5, p. 828-836 9 p.

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

2019

Thermal performance enhancement of flat plate solar air heater using transverse U-shaped turbulator - A numerical study

Manjunath, M. S., Venkatesh, R. & Madhwesh, N., 01-01-2019, In: Journal of Mechanical Engineering and Sciences. 13, 3, p. 5562-5587 26 p.

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

2020

Polymer nanocomposites for high-velocity impact applications-A review

Clifton, S., Thimmappa, B. H. S., Selvam, R. & Shivamurthy, B., 02-2020, In: Composites Communications. 17, p. 72-86 15 p.

Research output: Contribution to journal › Review article › peer-review

40 Citations (Scopus)

2021

The recent progress of synergistic supramolecular polymers: preparation, properties and applications

Huo, Y., He, Z., Wang, C., Zhang, L., Xuan, Q., Wei, S., Wang, Y., Pan, D., Dong, B., Wei, R., Naik, N. & Guo, Z., 11-02-2021, In: Chemical Communications. 57, 12, p. 1413-1429 17 p.

Research output: Contribution to journal › Article › peer-review

17 Citations (Scopus)

2020

A method for navigation of autonomous vehicles in outdoor environment through stereo correspondence

Shetty, A. A., George, V. I., Gurudas Nayak, C. & Shett, R., 01-01-2020, In: Journal of Advanced Research in Dynamical and Control Systems. 12, 3 Special Issue, p. 1044-1050 7 p.

Research output: Contribution to journal › Article › peer-review

2021

Professional roles of female urologists: A webinar-based survey of perceptions and obstacles to career development

Ibrahim, S., Pietropaolo, A., Naik, N., Patel, A., Shah, M. J., Zondervan, P., McDonald, J., Zeeshan Hameed, B. M., Rai, B. P., Karimi, H., Somani, B. K. & Cresswell, J., 20-12-2021, In: Archivio Italiano di Urologia e Andrologia. 93, 4, p. 455-459 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

2022

Nosocomial Infections and Role of Nanotechnology

Ananda, T., Modi, A., Chakraborty, I., Managuli, V., Mukhopadhyay, C. & Mazumder, N., 02-2022, In: Bioengineering. 9, 2, 51.

Research output: Contribution to journal › Review article › peer-review

Open Access

Optimization of preheating temperature for TiB₂reinforcement on the preparation of stir cast LM4 + TiB₂composites and effect of artificial aging on hardness improvement using ANOVA

Srinivas, D., Gowrishankar, M. C., Sharma, S., Hegde, A., Gurumurthy, B. M. & Deepak, D., 2022, In: Manufacturing Review. 9, 8.

Research output: Contribution to journal › Article › peer-review

Open Access

2019

Solar still efficiency augmentation using cylindrical: Sweeping Agitator on the absorber plate

Manjunath, M., 31-08-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 4, p. 347-354 8 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

2021

Influence of End Mill Geometry on Milling Force and Surface Integrity While Machining Low Rigidity Parts

Joshi, S. N. & Bolar, G., 01-12-2021, In: Journal of The Institution of Engineers (India): Series C.

Research output: Contribution to journal › Article › peer-review

Open Access

2012

Real-time computer simulation of three dimensional elastostatics using the Finite Point Method

Kirana Kumara, P. & Ghosal, A., 2012, Mechanical and Aerospace Engineering. p. 2740-2745 6 p. (Applied Mechanics and Materials; vol. 110-116).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

2021

Experimental investigation and optimization of wall deflection and material removal rate in milling thin-wall parts

Bolar, G. & Joshi, S. N., 2021, In: Manufacturing Review. 8, 2021015.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

Two body wear characteristics of polyalthia longifolia/mangifera indica/jute fiber reinforced epoxy composites using taguchi technique

Heckadka, S. S., Nayak, S. Y., Rao, S., Samant, R., Shrinidhi, L. K. & Salunkhe, K. M., 2021, In: Materials Research. 24, 2, e20200323.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Citation (Scopus)

2018

Integer and fractional order-based viscoelastic constitutive modeling to predict the frequency and magnetic field-induced properties of magnetorheological elastomer

Poojary, U. R. & Gangadharan, K. V., 01-08-2018, In: Journal of Vibration and Acoustics, Transactions of the ASME. 140, 4, 0410071.

Research output: Contribution to journal › Article › peer-review

15 Citations (Scopus)

2017

Magnetic field and frequency dependent LVE limit characterization of magnetorheological elastomer

Poojary, U. R. & Gangadharan, K. V., 01-04-2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 4, p. 1365-1373 9 p.

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

2021

Reinforcements, production techniques and property analysis of AA7075 matrix composites-a critical review

Sowrabh, B. S., Gurumurthy, B. M., Shivaprakash, Y. M. & Sharma, S. S., 2021, In: Manufacturing Review. 8, 31.

Research output: Contribution to journal › Review article › peer-review

Open Access

2010

Effect of machining parameters on surface roughness and material removal rate in finish turning of ±30° glass fibre reinforced polymer pipes

Kini, M. V. & Chincholkar, A. M., 01-08-2010, In: Materials and Design. 31, 7, p. 3590-3598 9 p.

Research output: Contribution to journal › Article › peer-review

34 Citations (Scopus)

2018

Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology

Mohan, N. S. & Kulkarni, S. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012031.

Research output: Contribution to journal › Conference article › peer-review

5 Citations (Scopus)

2019

Comparative assessment of three microimplant assisted biomechanical strategies for the simultaneous intrusion and retraction of anterior teeth in relation to alveolar bone stress and change in incisor inclinations – A 3D finite element analysis study

Bariar, A., Shetty, S., Desai, A. & Adhikari, R., 01-01-2019, In: Biomedical and Pharmacology Journal. 12, 2, p. 747-757 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2010

Elasto-hydrodynamic lubrication analysis of full 360° journal bearing using CFD and FSI techniques

Shenoy, B. S., Pai, R., Rao, D. S. & Pai, R., 01-11-2010, In: World Journal of Modelling and Simulation. 6, 4, p. 315-320 6 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

2019

Aging kinetics and microstructural features of Al6061-SiC+B₄C stir cast hybrid composites

Sathyashankarasharma, Gurumurthy, Gowrishankar, Kini, A., Shettar, M. & Hiremath, P., 31-12-2019, In: International Journal of Automotive and Mechanical Engineering. 16, 4, p. 7211-7224 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

5 Citations (Scopus)

2009

Performance characteristics of a misaligned single pad externally adjustable fluid-film bearing

Shenoy, B. S. & Pai, R., 2009, In: Tribology in Industry. 31, 3-4, p. 29-36 8 p.

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

2016

Roles of Lon protease and its substrate MarA during sodium salicylate-mediated growth reduction and antibiotic resistance in Escherichia coli

Bhaskarla, C., Das, M., Verma, T., Kumar, A., Mahadevan, S. & Nandi, D., 01-05-2016, In: Microbiology (United Kingdom). 162, 5, p. 764-776 13 p., 000271.

Research output: Contribution to journal › Article › peer-review

20 Citations (Scopus)

2011

Efficacy and safety of topical halometasone in eczematous dermatoses in Indian population: An open label, noncomparative study

Jerajani, H. R., Kumar, A. S., Kuruvila, M., Nataraja, H. V., Philip, M., Pratap, D. V. S., Sumathy, T. K., Krishnankutty, B., Dhawan, S. & Thomas, D., 01-11-2011, In: Indian Journal of Dermatology. 56, 6, p. 652-656 5 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

2015

Pathophysiology and diagnosis of Guillain-Barré syndrome-challenges and needs

Dash, S., Pai, A. R., Kamath, U. & Rao, P., 01-06-2015, In: International Journal of Neuroscience. 125, 4, p. 235-240 6 p.

Research output: Contribution to journal › Article › peer-review

17 Citations (Scopus)

2009

Importance of non-conserved distal carboxyl terminal amino acids in two peptidases belonging to the M1 family: Thermoplasma acidophilum Tricorn interacting factor F2 and Escherichia coli Peptidase N

Kumar, A., Bhosale, M., Reddy, S., Srinivasan, N. & Nandi, D., 01-09-2009, In: Biochimie. 91, 9, p. 1145-1155 11 p.

Research output: Contribution to journal › Article › peer-review

11 Citations (Scopus)

Filters for Research output

Search results