Find Research outputs

Search results

• Optimising clinical outcomes with innovative research in the intensive care unit

  Patil, V., Radhakrishnan, M., Rao, S. & Kurdi, M. S., 08-2022, In: Indian Journal of Anaesthesia. 66, 8, p. 549-552 4 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

• Optimising pair programming in a scholastic framework: A design pattern perspective

  Rajagopal, S., Hareesha, K. S. & Kundapur, P. P., 20-05-2017, In: Journal of Computer Science. 13, 6, p. 199-210 12 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization, kinetics, equilibrium isotherms, and thermodynamics studies for congo red dye adsorption using calcium alginate beads immobilized with dual adsorbent (Neurospora crassa dead fungal biomass and wheat bran)

  Vairavel, P. & Ramachandra Murty, V., 01-11-2017, In: Desalination and Water Treatment. 97, p. 338-362 25 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Optimization, kinetics, equilibrium isotherms, and thermodynamics studies of coomassie violet dye adsorption using azadirachta indica (Neem) leaf adsorbent

  Divya, J. M., Palak, K. & Vairavel, P., 06-2020, In: Desalination and Water Treatment. 190, p. 353-382 30 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Optimization and life cycle cost analysis of renewable energy supply options for academic buildings - A case study

  Paragond, L. R. S., Kurian, C. P. & Singh, B. K., 01-01-2019, In: International Journal of Energy Economics and Policy. 9, 5, p. 224-236 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization and modeling of material removal rate in wire‐edm of silicon particle reinforced al6061 composite

  Doreswamy, D., Bongale, A. M., Piekarski, M., Bongale, A., Kumar, S., Pimenov, D. Y., Giasin, K. & Nadolny, K., 01-11-2021, In: Materials. 14, 21, 6420.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  9 Citations (Scopus)

• Optimization and performance evaluation of peptide-loaded monolithic poly-ε-caprolactone microspheres in mice bearing melanoma B16F1

  Shenoy, B. D., Venkatesh, M. & Udupa, N., 2002, In: Pharmazie. 57, 4, p. 256-260 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Optimization and prediction of hardness, wear and surface roughness on age hardened stellite 6 alloys

  Karthik, S. R., Londe, N. V., Shetty, R., Nayak, R. & Hedge, A., 2022, In: Manufacturing Review. 9, 10.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Optimization and Prediction of Mechanical Characteristics on Vacuum Sintered Ti-6Al-4V-SiCp Composites Using Taguchi’s Design of Experiments, Response Surface Methodology and Random Forest Regression

  Hegde, A. L., Shetty, R., Chiniwar, D. S., Naik, N. & Nayak, M., 11-2022, In: Journal of Composites Science. 6, 11, 339.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• OPTIMIZATION AND PREDICTION OF THE HARDNESS BEHAVIOUR OF LM4 + SI3N4 COMPOSITES USING RSM AND ANN - A COMPARATIVE STUDY

  Srinivas, D., Sharma, S., Gowrishankar, Nayak, R., Kumar, N. & Shettar, M., 2022, In: Journal of Applied Engineering Science. 20, 4, p. 1214-1225 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization and Validation of a Multiresidue Method for Screening of 126 Pesticide Residues in Herbal Raw Materials and Extracts Used as Ingredients in Ayurvedic Medicines and Dietary Supplements

  Koshy, R., Yadav, S., Rajeshkumar, R., Singh, V. K., Setty, M. M., Murali, B. & Agarwal, A., 01-05-2022, In: Journal of AOAC International. 105, 3, p. 748-758 11 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization and validation of indirect ELISA using truncated TssB protein for the serodiagnosis of glanders amongst equines

  Singha, H., Malik, P., Goyal, S. K., Khurana, S. K., Mukhopadhyay, C., Eshwara, V. K. & Singh, R. K., 06-03-2014, In: The Scientific World Journal. 2014, 469407.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• Optimization based feasibility analysis for Energy Conservation Building Code compliance of opaque wall assemblies in different climatic zones of India

  Kishore, P., Kini, P. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 221-228 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization based feasibility study for filler slabs as a response towards the ECBC roof compliance with respect to thermal transmittance for five climatic zones of India

  Acharya, R. R., Kishore, P., Raghuprem, M., Kini, P., Shetty, S. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 213-220 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Optimization in high dose rate vaginal cylinder for vaginal cuff irradiation

  Sivakumar, S. S., Solomon, J. G. R., Supe, S. S., Vadhiraja, B. M., Rao, K. K. & Vidyasagar, M. S., 01-01-2008, In: Reports of Practical Oncology and Radiotherapy. 13, 1, p. 35-48 14 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Optimization of 2.4 GHz CMOS Low Noise Amplifier Using Hybrid Particle Swarm Optimization with Lévy Flight

  Joshi, D., Dash, S., Malhotra, A., Sai, P. V., Das, R., Sharma, DI. & Trivedi, G., 21-03-2017, Proceedings - 2017 30th International Conference on VLSI Design and 2017 16th International Conference on Embedded Systems, VLSID 2017. Institute of Electrical and Electronics Engineers Inc., p. 181-186 6 p. 7884776

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Optimization of Aqueous Two-Phase Systems for the Recovery of Soluble Proteins from Tannery Wastewater Using Response Surface Methodology

  Raja, S. & Murty, V. R., 01-01-2013, In: Journal of Engineering (United States). 2013, 217483.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Optimization of association rules using hybrid data mining technique

  Shankar, S. P., Naresh, E. & Agrawal, H., 06-2022, In: Innovations in Systems and Software Engineering. 18, 2, p. 251-261 11 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization of Axially Magnetized Stack Structured Permanent Magnet Thrust Bearing Using Three- Dimensional Mathematical Model

  Bekinal, S. I., Doddamani, M. & Jana, S., 01-05-2017, In: Journal of Tribology. 139, 3, 031101.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• Optimization of batch process parameters for congo red color removal by neurospora crassa live fungal biomass with wheat bran dual adsorbent using response surface methodology

  Vairavel, P. & Murty, V. R., 01-01-2018, In: Desalination and Water Treatment. 103, p. 84-101 18 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Optimization of chronomodulated delivery system coated with a blend of ethyl cellulose and Eudragit L100 by central composite design: In vitro and in vivo evaluation

  Ranjan, O. P., Nayak, U. Y., Reddy, M. S., Dengale, S. J., Musmade, P. B. & Udupa, N., 2014, In: Journal of Pharmaceutical Innovation. 9, 2, p. 95-105 11 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Optimization of cultural conditions for protease production by a fungal species

  Kamath, P., Subrahmanyam, V. M., Rao, J. & Raj, P., 2010, In: Indian Journal of Pharmaceutical Sciences. 72, 2, p. 161-166 6 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Optimization of culture conditions for human bone marrow-derived mesenchymal stromal cell expansion in macrocarrier-based Tide Motion system

  Bhat, S., Chiew, G. G. Y., Ng, J. X., Lin, X. & Seetharam, R. N., 07-2021, In: Biotechnology Journal. 16, 7, 2000540.

  Research output: Contribution to journal › Article › peer-review

• Optimization of day-ahead energy storage system scheduling in microgrid using genetic algorithm and particle swarm optimization

  Raghavan, A., Maan, P. & Shenoy, A. K. B., 2020, In: IEEE Access. 8, p. 173068-173078 11 p., 3025673.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  19 Citations (Scopus)

• Optimization of delivery of betamethasone-dipropionate from skin preparation

  Bhat, M., Shenoy, S. D., Udupa, N. & Srinivas, C. R., 1995, In: Indian Drugs. 32, 5, p. 211-214 4 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Optimization of different sampling approaches in liquid LIBS analysis for environmental applications

  Keerthi, K., George, S. D., Sebastian, J. G., Warrier, A. K., Chidangil, S. & Unnikrishnan, V. K., 12-10-2022, In: Journal of Analytical Atomic Spectrometry. 37, 12, p. 2625-2636 12 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization of elastomeric passive engine mount using direct optimization method

  Vijay Kumar, K. & Shetty, N., 30-04-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 2, p. 121-130 10 p., IJMPERDAPR2018013.

  Research output: Contribution to journal › Article › peer-review

• Optimization of Electrode Design in Capacitance Liquid Level Sensor

  Hanni, J. R. & Santhosh, V. K., 27-08-2021, 2021 6th International Conference on Recent Trends on Electronics, Information, Communication and Technology, RTEICT 2021. Institute of Electrical and Electronics Engineers Inc., p. 38-42 5 p. (2021 6th International Conference on Recent Trends on Electronics, Information, Communication and Technology, RTEICT 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Optimization of energy storage elements in a cross-connected capacitors boost converter

  Anandh, N., Ramesh, H. & Fusic, S. J., 11-05-2018, Proceedings of the 2017 International Conference On Smart Technology for Smart Nation, SmartTechCon 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Optimization of engine parameters in a bio diesel engine run with honge methyl ester using response surface methodology

  Kumar, S. & Dinesha, P., 01-09-2018, In: Measurement: Journal of the International Measurement Confederation. 125, p. 224-231 8 p.

  Research output: Contribution to journal › Article › peer-review
  61 Citations (Scopus)

• Optimization of flanges for diffuser casings of diffuser augmented wind turbines

  Gaonkar, A. A., Surya, S. & Jayakrishnan, R., 02-11-2020, 2nd International Conference on Mechanical Materials and Renewable Energy, ICMMRE 2019. Gao, X-Z., Ghadai, R. K., Kalita, K., Shivakoti, I., Kilickap, E., Kundu, T. & Das, S. (eds.). American Institute of Physics Inc., 050040. (AIP Conference Proceedings; vol. 2273).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique

  Prabhu, S. R., Shettigar, A., Herbert, M. A. & Rao, S. S., 04-2022, In: Scientia Iranica. 29, 2 B, p. 534-542 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization of gain and return loss of a 2 × 6 planar coaxial cavity horn antenna array for MELISSA

  Vincent, S., Francis, S. A. J., Kumar, O. P. & Raimond, K., 03-07-2018, 2017 IEEE International Conference on Antenna Innovations and Modern Technologies for Ground, Aircraft and Satellite Applications, iAIM 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Optimization of glucoamylase production by Humicola grisea MTCC 352 in solid state fermentation

  Ramesh, V. & Murty, V. R., 01-07-2019, In: Chiang Mai University Journal of Natural Sciences. 18, 3, p. 251-266 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization of Hip Implant Designs Based on Its Mechanical Behaviour

  Göktaş, H., Subaşi, E., Uzkut, M., Kara, M., Biçici, H., Shirazi, H., Chethan, K. N. & Mihçin, Ş., 2022, Biomechanics in Medicine, Sport and Biology. Hadamus, A., Piszczatowski, S., Syczewska, M. & Błażkiewicz, M. (eds.). Springer Science and Business Media Deutschland GmbH, p. 37-43 7 p. (Lecture Notes in Networks and Systems; vol. 328 LNNS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Optimization of Hole Characteristics During Pulse Nd:YAG Laser Drilling of Commercially Pure Titanium Alloy

  Avvari, M., Manjaiah, M., Able, M., Laubscher, R. F. & Raghavendra, K., 01-06-2017, In: Lasers in Manufacturing and Materials Processing. 4, 2, p. 76-91 16 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Optimization of inbound logistics by implementing e-kanban system in an automobile accessories manufacturing unit – a case study

  Raog, K., Kenneth Michael, L. & Sriram, K. V., 01-06-2019, In: Quality - Access to Success. 20, 170, p. 106-111 6 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization of Inhibition Efficiency of a Schiff Base on Mild Steel in Acid Medium: Electrochemical and RSM Approach

  Kumari, P. & Lavanya, M., 09-2021, In: Journal of Bio- and Tribo-Corrosion. 7, 3, 110.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization of inulinase production by a newly isolated Penicillium amphipolaria strain using solid-state fermentation of hardy sugarcane stems

  Das, D., Bhat M, R. & Selvaraj, R., 11-2020, In: Biocatalysis and Agricultural Biotechnology. 30, 101875.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Optimization of inulinase production by a newly isolated strain Aspergillus flavus var. flavus by solid state fermentation of Saccharum arundinaceum

  Das, D., Selvaraj, R. & Ramananda Bhat, M., 01-11-2019, In: Biocatalysis and Agricultural Biotechnology. 22, 101363.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Optimization of LED lighting system for horticulture application – A simulation

  Sowmya, R., Kurian, C. P. & Narasimhan, S., 01-01-2019, In: Journal of Advanced Research in Dynamical and Control Systems. 11, 1 Special Issue, p. 1221-1225 5 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization of Material Removal Rate, Surface Roughness and Kerf Width in Wire-ED Machining of Ti-6Al-4V Using RSM and Grey Relation

  Doreswamy, D., Shreyas, D. S. & Bhat, S. K., 11-2022, In: International Journal of Engineering, Transactions B: Applications. 35, 11, p. 2247-2255 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization of material removal rate and surface characterization of wire electric discharge machined Ti-6Al-4V alloy by response surface method

  Doreswamy, D., Sai Shreyas, D., Bhat, S. K. & Rao, R. N., 2022, In: Manufacturing Review. 9, 15.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization of Microbial Leaching of Base Metals from a South African Sulfidic Nickel Ore Concentrate by Acidithiobacillus ferrooxidans

  Behera, S. K., Manjaiah, M., Sekar, S., Panda, S. K., Mavumengwana, V. & Mulaba-Bafubiandi, A. F., 03-07-2018, In: Geomicrobiology Journal. 35, 6, p. 447-459 13 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Optimization of parameters for transdermal permeation of insulin

  Chandrashekar, G., Bhat, R., Singh, M. K. & Udupa, N., 1994, In: Indian Journal of Pharmaceutical Sciences. 56, 6, p. 205-209 5 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Optimization of pediatric CT brain protocol to achieve reduced patient dose

  Karappara, J., Koteshwar, P., Panakkal, N. C. & Sukumar, S., 01-01-2020, In: Biomedical and Pharmacology Journal. 13, 1, p. 391-397 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization of pid controller gains of an aircraft pitch control system using particle swarm optimization algorithm

  Chowdhury, A. & Nair, V. G., 31-12-2017, In: International Journal of Mechanical and Production Engineering Research and Development. 7, 6, p. 223-229 7 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Optimization of preheating temperature for TiB₂reinforcement on the preparation of stir cast LM4 + TiB₂composites and effect of artificial aging on hardness improvement using ANOVA

  Srinivas, D., Gowrishankar, M. C., Sharma, S., Hegde, A., Gurumurthy, B. M. & Deepak, D., 2022, In: Manufacturing Review. 9, 8.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Optimization of reducing sugars production from agro-residue coconut leaflets using autoclave-assisted HCl hydrolysis with response surface methodology

  Shet, V. B., Varun, C., Aishwarya, U., Palan, A. M., Rao, S. U., Goveas, L. C., Raja, S., Rao, C. V. & Puttur, U., 01-06-2018, In: Agriculture and Natural Resources. 52, 3, p. 280-284 5 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Optimization of the brake parameter for a disc brake system to improve the heat dissipation using taguchi method

  Bhat, R. & Lee, K. S., 01-07-2017, In: International Journal of Mechanical Engineering and Technology. 8, 7, p. 44-52 9 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)