Find Research outputs

Search results

• Optimization of gain and return loss of a 2 × 6 planar coaxial cavity horn antenna array for MELISSA

  Vincent, S., Francis, S. A. J., Kumar, O. P. & Raimond, K., 03-07-2018, 2017 IEEE International Conference on Antenna Innovations and Modern Technologies for Ground, Aircraft and Satellite Applications, iAIM 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique

  Prabhu, S. R., Shettigar, A., Herbert, M. A. & Rao, S. S., 04-2022, In: Scientia Iranica. 29, 2 B, p. 534-542 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization of flanges for diffuser casings of diffuser augmented wind turbines

  Gaonkar, A. A., Surya, S. & Jayakrishnan, R., 02-11-2020, 2nd International Conference on Mechanical Materials and Renewable Energy, ICMMRE 2019. Gao, X-Z., Ghadai, R. K., Kalita, K., Shivakoti, I., Kilickap, E., Kundu, T. & Das, S. (eds.). American Institute of Physics Inc., 050040. (AIP Conference Proceedings; vol. 2273).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Optimization of engine parameters in a bio diesel engine run with honge methyl ester using response surface methodology

  Kumar, S. & Dinesha, P., 01-09-2018, In: Measurement: Journal of the International Measurement Confederation. 125, p. 224-231 8 p.

  Research output: Contribution to journal › Article › peer-review
  61 Citations (Scopus)

• Optimization of energy storage elements in a cross-connected capacitors boost converter

  Anandh, N., Ramesh, H. & Fusic, S. J., 11-05-2018, Proceedings of the 2017 International Conference On Smart Technology for Smart Nation, SmartTechCon 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Optimization of Electrode Design in Capacitance Liquid Level Sensor

  Hanni, J. R. & Santhosh, V. K., 27-08-2021, 2021 6th International Conference on Recent Trends on Electronics, Information, Communication and Technology, RTEICT 2021. Institute of Electrical and Electronics Engineers Inc., p. 38-42 5 p. (2021 6th International Conference on Recent Trends on Electronics, Information, Communication and Technology, RTEICT 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Optimization of elastomeric passive engine mount using direct optimization method

  Vijay Kumar, K. & Shetty, N., 30-04-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 2, p. 121-130 10 p., IJMPERDAPR2018013.

  Research output: Contribution to journal › Article › peer-review

• Optimization of different sampling approaches in liquid LIBS analysis for environmental applications

  Keerthi, K., George, S. D., Sebastian, J. G., Warrier, A. K., Chidangil, S. & Unnikrishnan, V. K., 12-10-2022, In: Journal of Analytical Atomic Spectrometry. 37, 12, p. 2625-2636 12 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization of delivery of betamethasone-dipropionate from skin preparation

  Bhat, M., Shenoy, S. D., Udupa, N. & Srinivas, C. R., 1995, In: Indian Drugs. 32, 5, p. 211-214 4 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Optimization of day-ahead energy storage system scheduling in microgrid using genetic algorithm and particle swarm optimization

  Raghavan, A., Maan, P. & Shenoy, A. K. B., 2020, In: IEEE Access. 8, p. 173068-173078 11 p., 3025673.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  19 Citations (Scopus)

• Optimization of culture conditions for human bone marrow-derived mesenchymal stromal cell expansion in macrocarrier-based Tide Motion system

  Bhat, S., Chiew, G. G. Y., Ng, J. X., Lin, X. & Seetharam, R. N., 07-2021, In: Biotechnology Journal. 16, 7, 2000540.

  Research output: Contribution to journal › Article › peer-review

• Optimization of cultural conditions for protease production by a fungal species

  Kamath, P., Subrahmanyam, V. M., Rao, J. & Raj, P., 2010, In: Indian Journal of Pharmaceutical Sciences. 72, 2, p. 161-166 6 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Optimization of chronomodulated delivery system coated with a blend of ethyl cellulose and Eudragit L100 by central composite design: In vitro and in vivo evaluation

  Ranjan, O. P., Nayak, U. Y., Reddy, M. S., Dengale, S. J., Musmade, P. B. & Udupa, N., 2014, In: Journal of Pharmaceutical Innovation. 9, 2, p. 95-105 11 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Optimization of batch process parameters for congo red color removal by neurospora crassa live fungal biomass with wheat bran dual adsorbent using response surface methodology

  Vairavel, P. & Murty, V. R., 01-01-2018, In: Desalination and Water Treatment. 103, p. 84-101 18 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Optimization of Axially Magnetized Stack Structured Permanent Magnet Thrust Bearing Using Three- Dimensional Mathematical Model

  Bekinal, S. I., Doddamani, M. & Jana, S., 01-05-2017, In: Journal of Tribology. 139, 3, 031101.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• Optimization of association rules using hybrid data mining technique

  Shankar, S. P., Naresh, E. & Agrawal, H., 06-2022, In: Innovations in Systems and Software Engineering. 18, 2, p. 251-261 11 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization of Aqueous Two-Phase Systems for the Recovery of Soluble Proteins from Tannery Wastewater Using Response Surface Methodology

  Raja, S. & Murty, V. R., 01-01-2013, In: Journal of Engineering (United States). 2013, 217483.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Optimization of 2.4 GHz CMOS Low Noise Amplifier Using Hybrid Particle Swarm Optimization with Lévy Flight

  Joshi, D., Dash, S., Malhotra, A., Sai, P. V., Das, R., Sharma, DI. & Trivedi, G., 21-03-2017, Proceedings - 2017 30th International Conference on VLSI Design and 2017 16th International Conference on Embedded Systems, VLSID 2017. Institute of Electrical and Electronics Engineers Inc., p. 181-186 6 p. 7884776

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  9 Citations (Scopus)

• Optimization in high dose rate vaginal cylinder for vaginal cuff irradiation

  Sivakumar, S. S., Solomon, J. G. R., Supe, S. S., Vadhiraja, B. M., Rao, K. K. & Vidyasagar, M. S., 01-01-2008, In: Reports of Practical Oncology and Radiotherapy. 13, 1, p. 35-48 14 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Optimization based feasibility study for filler slabs as a response towards the ECBC roof compliance with respect to thermal transmittance for five climatic zones of India

  Acharya, R. R., Kishore, P., Raghuprem, M., Kini, P., Shetty, S. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 213-220 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Optimization based feasibility analysis for Energy Conservation Building Code compliance of opaque wall assemblies in different climatic zones of India

  Kishore, P., Kini, P. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 221-228 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization and validation of indirect ELISA using truncated TssB protein for the serodiagnosis of glanders amongst equines

  Singha, H., Malik, P., Goyal, S. K., Khurana, S. K., Mukhopadhyay, C., Eshwara, V. K. & Singh, R. K., 06-03-2014, In: The Scientific World Journal. 2014, 469407.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• Optimization and Validation of a Multiresidue Method for Screening of 126 Pesticide Residues in Herbal Raw Materials and Extracts Used as Ingredients in Ayurvedic Medicines and Dietary Supplements

  Koshy, R., Yadav, S., Rajeshkumar, R., Singh, V. K., Setty, M. M., Murali, B. & Agarwal, A., 01-05-2022, In: Journal of AOAC International. 105, 3, p. 748-758 11 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• OPTIMIZATION AND PREDICTION OF THE HARDNESS BEHAVIOUR OF LM4 + SI3N4 COMPOSITES USING RSM AND ANN - A COMPARATIVE STUDY

  Srinivas, D., Sharma, S., Gowrishankar, Nayak, R., Kumar, N. & Shettar, M., 2022, In: Journal of Applied Engineering Science. 20, 4, p. 1214-1225 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization and Prediction of Mechanical Characteristics on Vacuum Sintered Ti-6Al-4V-SiCp Composites Using Taguchi’s Design of Experiments, Response Surface Methodology and Random Forest Regression

  Hegde, A. L., Shetty, R., Chiniwar, D. S., Naik, N. & Nayak, M., 11-2022, In: Journal of Composites Science. 6, 11, 339.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization and prediction of hardness, wear and surface roughness on age hardened stellite 6 alloys

  Karthik, S. R., Londe, N. V., Shetty, R., Nayak, R. & Hedge, A., 2022, In: Manufacturing Review. 9, 10.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Optimization and performance evaluation of peptide-loaded monolithic poly-ε-caprolactone microspheres in mice bearing melanoma B16F1

  Shenoy, B. D., Venkatesh, M. & Udupa, N., 2002, In: Pharmazie. 57, 4, p. 256-260 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Optimization and modeling of material removal rate in wire‐edm of silicon particle reinforced al6061 composite

  Doreswamy, D., Bongale, A. M., Piekarski, M., Bongale, A., Kumar, S., Pimenov, D. Y., Giasin, K. & Nadolny, K., 01-11-2021, In: Materials. 14, 21, 6420.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  9 Citations (Scopus)

• Optimization and life cycle cost analysis of renewable energy supply options for academic buildings - A case study

  Paragond, L. R. S., Kurian, C. P. & Singh, B. K., 01-01-2019, In: International Journal of Energy Economics and Policy. 9, 5, p. 224-236 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization, kinetics, equilibrium isotherms, and thermodynamics studies of coomassie violet dye adsorption using azadirachta indica (Neem) leaf adsorbent

  Divya, J. M., Palak, K. & Vairavel, P., 06-2020, In: Desalination and Water Treatment. 190, p. 353-382 30 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Optimization, kinetics, equilibrium isotherms, and thermodynamics studies for congo red dye adsorption using calcium alginate beads immobilized with dual adsorbent (Neurospora crassa dead fungal biomass and wheat bran)

  Vairavel, P. & Ramachandra Murty, V., 01-11-2017, In: Desalination and Water Treatment. 97, p. 338-362 25 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Optimising pair programming in a scholastic framework: A design pattern perspective

  Rajagopal, S., Hareesha, K. S. & Kundapur, P. P., 20-05-2017, In: Journal of Computer Science. 13, 6, p. 199-210 12 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimising clinical outcomes with innovative research in the intensive care unit

  Patil, V., Radhakrishnan, M., Rao, S. & Kurdi, M. S., 08-2022, In: Indian Journal of Anaesthesia. 66, 8, p. 549-552 4 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

• Optimisation of wire-edm process parameters for achieving low surface roughness in machining of is 5986 fe 410 steel and regression modelling

  Deepak, D. & Rajendra, B., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 6, p. 399-410 12 p., IJMPERDDEC201934.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimisation of Surgical Results in de-Quervain's Disease

  Kamath, B. J., Vardhan, H., Jayasheelan, N., Mahale, A. & Kumar, A., 01-10-2013, In: Online Journal of Health and Allied Sciences. 12, 4, 6.

  Research output: Contribution to journal › Article › peer-review

• Optimisation of process parameters for minimising the surface roughness during wire-electrical discharge machining (WEDM) of silicon particle reinforced al6061 composite

  Deepak, D. & Rajendra, B., 06-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 3, p. 851-860 10 p., IJMPERDJUN202076.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimisation of milk run logistics for an automotive component manufacturer – A case study

  Pranava, K. S., Michael, L. K., Mathew, A. O. & Sriram, K. V., 01-08-2019, In: Quality - Access to Success. 20, 171, p. 27-34 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Optimisation of current and pulse duration in electric discharge drilling of D2 steel using graphite electrode

  Deepak, D., Shrinivas, P., Hemant, G. & Iasy, R., 01-12-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 4, p. 5914-5926 13 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Optimisation of chemical dosage to dissolved air flotation tank

  Bhat, M. R., Kulkarni, V. & Hiremath, R. S., 2003, In: Journal of Industrial Pollution Control. 19, 1, p. 63-68 6 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimisation of carbon nanotubes for advanced diagnosis and biomedical application

  Parwez, K. & Budihal, S. V., 01-01-2019, In: International Journal of Nanoparticles. 11, 3, p. 217-238 22 p.

  Research output: Contribution to journal › Article › peer-review

• Optimisation of attribution processes using novel pixel-value based colour detection approach

  Kejriwal, K., Jaiswal, A. & Rao J, V., 01-2022, In: Materials Today: Proceedings. 62, p. 1560-1563 4 p.

  Research output: Contribution to journal › Article › peer-review

• Optimisation and evaluation of hyperspectral imaging system using machine learning algorithm

  Suthar, G., Huang, J. Y. & Chidangil, S., 01-01-2017, Emerging Imaging and Sensing Technologies for Security and Defence II. Buller, G. S., Lewis, K. L., Hollins, R. C. & Lamb, R. A. (eds.). SPIE, Vol. 10438. 104380L

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Optimal trajectory generation of launch vehicle using PSO algorithm

  Dileep, M. V., Kamath, S. & Nair, V. G., 10-07-2015, 2015 1st International Conference on Futuristic Trends in Computational Analysis and Knowledge Management, ABLAZE 2015. Institute of Electrical and Electronics Engineers Inc., p. 56-60 5 p. 7154970

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Optimal trajectory generation for the ascent phase of launch vehicle using θ-PSO approach

  Dileep, M. V., Kamath, S. & Nair, V. G., 2016, In: International Journal of Control Theory and Applications. 9, 39, p. 95-101 7 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Optimal trajectory design and analysis for soft landing on the moon from lunar parking orbits

  Choudhary, S. K., Raj, K. & Muthukumar, V., 01-01-2019, In: International Journal of Space Science and Engineering. 5, 4, p. 321-338 18 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimal Timing of Cranioplasty: Controversial Debate?

  Prasad, G. L., 01-01-2017, In: World Neurosurgery. 97, p. 743-744 2 p.

  Research output: Contribution to journal › Comment/debate › peer-review
  1 Citation (Scopus)

• Optimal timing for containment surgery for Perthes disease

  Joseph, B., Sreekumaran Nair, N., Narasimha Rao, K. L., Mulpuri, K. & Varghese, G., 01-01-2003, In: Journal of Pediatric Orthopaedics. 23, 5, p. 601-606 6 p.

  Research output: Contribution to journal › Article › peer-review
  74 Citations (Scopus)

• Optimal scheduling of non-convex cogeneration units using exponentially varying whale optimization algorithm

  Jadoun, V. K., Prashanth, G. R., Joshi, S. S., Agarwal, A., Malik, H., Alotaibi, M. A. & Almutairi, A., 02-02-2021, In: Energies. 14, 4, 1008.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Optimal scheduling of grid-connected microgrid using PSO in dynamic pricing environment

  Sharma, N., Jha, P., Jadoun, V. K. & Agarwal, A., 10-07-2020, 2020 IEEE Students' Conference on Engineering and Systems, SCES 2020. Institute of Electrical and Electronics Engineers Inc., 9236758. (2020 IEEE Students' Conference on Engineering and Systems, SCES 2020).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Optimal scheduling of dynamic pricing based v2g and g2v operation in microgrid using improved elephant herding optimization

  Jadoun, V. K., Sharma, N., Jha, P., Jayalakshmi, N. S., Malik, H. & Garcia Márquez, F. P., 02-07-2021, In: Sustainability (Switzerland). 13, 14, 7551.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  8 Citations (Scopus)