Find Research outputs

Search results

• Modelling and thermal analysis of honey comb heat sink for LEDs in street lighting applications

  Paul, B., Mathew, M. & Shripad, P. G., 13-10-2017, Proceedings of the International Conference on Inventive Systems and Control, ICISC 2017. Institute of Electrical and Electronics Engineers Inc., 8068618

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Modelling and Simulation Study of Glucose Insulin Control in Type 1 Diabetic Patient Used for Developing Artificial Pancreas

  Dias, C. C., Kamath, S. & Vidyasagar, S., 26-04-2019, Proceedings - 2019 Amity International Conference on Artificial Intelligence, AICAI 2019. Institute of Electrical and Electronics Engineers Inc., p. 653-658 6 p. 8701401. (Proceedings - 2019 Amity International Conference on Artificial Intelligence, AICAI 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Modelling and simulation of Switched Reluctance generator control for Variable Speed Wind Energy Conversion Systems

  Koreboina, V. B. & Venkatesha, L., 2012, PEDES 2012 - IEEE International Conference on Power Electronics, Drives and Energy Systems. 6484466. (PEDES 2012 - IEEE International Conference on Power Electronics, Drives and Energy Systems).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  12 Citations (Scopus)

• Modelling and simulation of quality management in higher education: A system dynamics approach

  Rodrigues, L. L. R., Hebbar, S., Suraj, S. & Leekha, D., 01-12-2012, In: Proceedings of International Conference on Computational Intelligence, Modelling and Simulation. p. 304-309 6 p., 6338094.

  Research output: Contribution to journal › Article › peer-review

• Modelling and optimization of homogenous Photo-Fenton degradation of rhodamine B by response surface methodology and artificial neural network

  Speck, F., Raja, S., Ramesh, V. & Thivaharan, V., 01-09-2016, In: International Journal of Environmental Research. 10, 4, p. 543-554 12 p.

  Research output: Contribution to journal › Article › peer-review
  24 Citations (Scopus)

• Modelling and control of nonlinear negative imaginary systems

  Choudhary, S. K., Chokkadi, S. & Sudhakara, G., 2022, (Accepted/In press) In: International Journal of Dynamics and Control.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Modelling and analysis of thermomechanical behaviour in composite bimorph actuator

  Shivashankar, H. & Kulkarni, S. M., 2018, Composite Materials and Material Engineering II. Zhu, X. H. (ed.). Trans Tech Publications Ltd, p. 209-214 6 p. (Materials Science Forum; vol. 928 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Modelling and analysis of polymer diaphragms for micro sensing and actuation

  Sushmita, Hiremath, S. & Kulkarni, S. M., 08-03-2019, Emerging Trends in Mechanical Engineering 2018. Gopalakrishna, B. K. & Mudradi, S. (eds.). American Institute of Physics Inc., 020004. (AIP Conference Proceedings; vol. 2080).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling two way concurrent buffer system using timed automata in UPPAAL

  Mishra, R., Zeeshaan, M. & Singh, S., 01-12-2012, Proceedings of the 2012 World Congress on Information and Communication Technologies, WICT 2012. p. 846-851 6 p. 6409193

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling the anatomy and function of the pelvic diaphragm and perineal body using a "string model"

  Nayak B., S. & Rodenbaugh, D. W., 01-01-2008, In: American Journal of Physiology - Advances in Physiology Education. 32, 2, p. 169-170 2 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Modeling QRS complex in dECG

  Kamath, C. & Ananthapadmanabhayuyu, T. V., 01-01-2007, In: IEEE Transactions on Biomedical Engineering. 54, 1, p. 156-158 3 p., 21.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Modeling of urea-water solution injection spray in SCR system

  Nayak, N. S., Kapilan, N. & Sadashiva Prabhu, S., 31-12-2012, Mechanical and Aerospace Engineering. p. 583-587 5 p. (Applied Mechanics and Materials; vol. 232).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling of nanocluster carbon defect states & thin film transistor

  Ramavenkateswaran, N., Sreelakshmi, K., De, S. & Satyanarayana, B. S., 28-06-2016, 7th IEEE India International Conference on Power Electronics, IICPE 2016. IEEE Computer Society, Vol. 2016-November. 8079428

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Modeling of low frequency dynamics of a smart system and its state feedback based active control

  Kant, M. & Parameswaran, A. P., 15-01-2018, In: Mechanical Systems and Signal Processing. 99, p. 774-789 16 p.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Modeling of Hybrid Plasmonic Ring Resonator Based on Dielectric Filled Subwavelength Metal Grating

  Singh, M., 01-01-2019, In: Plasmonics.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Modeling of Grating Assisted Hybrid Plasmonic Filter and Its On-Chip Gas Sensing Application

  Singh, M., Raghuwanshi, S. K. & Prakash, O., 01-06-2019, In: IEEE Sensors Journal. 19, 11, p. 4039-4044 6 p., 8635558.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)

• Modeling of CMOS compatible ring resonator switch with intermediate vanadium oxide as the switching element

  Singh, M. & Datta, A., 08-05-2018, 2nd International Conference on Condensed Matter and Applied Physics, ICC 2017. Shekhawat, M. S., Bhardwaj, S. & Suthar, B. (eds.). American Institute of Physics Inc., Vol. 1953. 060015

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling of cantilever type piezoelectric polymer actuator

  Aparna, Karanth, P. N. & Kulkarni, S. M., 08-06-2018, 2018 3rd International Conference on Control and Robotics Engineering, ICCRE 2018. Institute of Electrical and Electronics Engineers Inc., p. 274-279 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Modeling of burst mode 2R optical regenerator cascades for long-haul optical networks

  Desai, P. N., Phillips, A. J. & Sujecki, S., 04-2012, In: Journal of Optical Communications and Networking. 4, 4, p. 304-313 10 p., 6180276.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Modeling of a vertical hybrid plasmonic switch with VO₂ fin bragg grating

  Singh, M. & Datta, A., 01-06-2018, In: IEEE Photonics Technology Letters. 30, 11, p. 997-1000 4 p.

  Research output: Contribution to journal › Article › peer-review
  17 Citations (Scopus)

• Modeling of a single pass solar air heater

  Shanmuga Priya, S., Bauregger, S. & Thirunavukkarasu, I., 2015, In: International Journal of Control Theory and Applications. 8, 3, p. 1161-1170 10 p.

  Research output: Contribution to journal › Article › peer-review

• Modeling of a microstrip fifth order low pass filter for wimax application

  Kumar, P., Kumar, O. P., Vincent, S. & Ali, T., 2020, In: Telecommunications and Radio Engineering (English translation of Elektrosvyaz and Radiotekhnika). 79, 12, p. 1063-1071 9 p.

  Research output: Contribution to journal › Article › peer-review

• Modeling hedonic motive–based segments of wine festival visitors using decision tree approach

  Payini, V., Bolar, K., Mallya, J. & Kamath, V., 02-02-2022, In: International Journal of Wine Business Research. 34, 1, p. 19-36 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Modelingfreshness concept to overcome replay attackin Kerberos protocol using NuSMV

  Adyanthaya, S., Rukmangada, S., Tiwari, A. & Singh, S., 30-12-2010, 2010 International Conference on Computer and Communication Technology, ICCCT-2010. p. 125-129 5 p. 5640425

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling for analysis of antisymmetric angle ply laminated composite plates

  Patil, S. S., 02-11-2020, 2nd International Conference on Mechanical Materials and Renewable Energy, ICMMRE 2019. Gao, X-Z., Ghadai, R. K., Kalita, K., Shivakoti, I., Kilickap, E., Kundu, T. & Das, S. (eds.). American Institute of Physics Inc., 050051. (AIP Conference Proceedings; vol. 2273).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Modeling data races using UML/MARTE profile

  Akshay, K. C., Nayak, A. & Muniyal, B., 26-11-2014, Proceedings of the 2014 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2014. Institute of Electrical and Electronics Engineers Inc., p. 238-244 7 p. 6968340

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Modeling and verification of server aided verification protocol using NuSMV

  Saralaya, V., Kishore, J. K., Reddy, S. & Singh, S., 28-10-2011, Trends in Computer Science, Engineering and Information Technology - First International Conference on Computer Science, Engineering and Information Technology, CCSEIT 2011, Proceedings. p. 486-495 10 p. (Communications in Computer and Information Science; vol. 204 CCIS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling and verification of kerberos protocol using symbolic model verifier

  Mundra, P., Shukla, S., Sharma, M., Pai, R. M. & Singh, S., 2011, Proceedings - 2011 International Conference on Communication Systems and Network Technologies, CSNT 2011. p. 651-654 4 p. 5966530

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Modeling and verification of Inter Realm Authentication in Kerberos using symbolic model verifier

  Mundra, P., Sharma, M., Shukla, S. & Singh, S., 28-10-2011, Trends in Computer Science, Engineering and Information Technology - First International Conference on Computer Science, Engineering and Information Technology, CCSEIT 2011, Proceedings. p. 496-506 11 p. (Communications in Computer and Information Science; vol. 204 CCIS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling and verification of Fiat-Shamir zero knowledge authentication protocol

  Maurya, A. K., Choudhary, M. S., Ajeyaraj, P. & Singh, S., 01-12-2012, Advances in Computer Science and Information Technology: Computer Science and Engineering - Second International Conference, CCSIT 2012, Proceedings. PART 2 ed. p. 61-70 10 p. (Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST; vol. 85, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling and verification of chess game using NuSMV

  Saralaya, V., Kishore, J. K., Reddy, S., Pai, R. M. & Singh, S., 2011, Advances in Computing and Communications - First International Conference, ACC 2011, Proceedings. PART 2 ed. Vol. 191 CCIS. p. 460-470 11 p. (Communications in Computer and Information Science; vol. 191 CCIS, no. PART 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Modeling and sliding mode control of flexible link flexible joint Robot Manipulator

  Suklabaidya, S., Lochan, K. & Roy, B. K., 02-07-2015, Proceedings of the 2015 Conference on Advances In Robotics, AIR 2015. Association for Computing Machinery, Inc, a59. (ACM International Conference Proceeding Series; vol. 02-04-July-2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Modeling and simulation of hydroelectric power projects: A case study on Mullaperiyar reservoir

  Pynadath, P., Ramesh, K. V. & Chadaga, M., 01-01-2017, In: International Journal of Civil Engineering and Technology. 8, 4, p. 762-769 8 p.

  Research output: Contribution to journal › Article › peer-review

• Modeling and prediction of NO_x emission in an LPG–diesel dual-fuel CI engine

  Murthy, K., Srinivas, V. G. & Kumar, S., 2021, (Accepted/In press) In: Heat Transfer.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Modeling and performance study of DFIG for wind application

  Latha Shenoy, K., Gurudas Nayak, C. & Mandi, R. P., 11-05-2018, Proceedings of the 2017 International Conference On Smart Technology for Smart Nation, SmartTechCon 2017. Institute of Electrical and Electronics Engineers Inc., p. 1616-1620 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Modeling and optimization of thermally excited carbon black and polymer composite actuator

  Hiremath, S. & Kulkarni, S. M., 01-01-2020, In: Materials Today: Proceedings. 24, p. 798-805 8 p.

  Research output: Contribution to journal › Conference article › peer-review

• Modeling and optimization of tannase production with Triphala in packed bed reactor by response surface methodology, genetic algorithm, and artificial neural network

  Selvaraj, S., Vytla, R. M., Vijay, G. S. & Natarajan, K., 01-07-2019, In: 3 Biotech. 9, 7, 259.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Modeling and design of field programmable gate array based real time robust controller for active control of vibrating smart system

  Parameswaran, A. P., Ananthakrishnan, B. & Gangadharan, K. V., 09-06-2015, In: Journal of Sound and Vibration. 345, p. 18-33 16 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column

  Thirunavukkarasu, I., Janani, R., Yadav, E. S. & Priya Selvanathan, S., 01-04-2019, 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019. Institute of Electrical and Electronics Engineers Inc., p. 450-454 5 p. 8776844. (2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Modeling and control of low frequency dynamics of a smart system

  Kant, M., Motsara, A. & Parameswaran, A. P., 2016, In: Indian Journal of Science and Technology. 9, 44, 101926.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Modeling and analysis of voltage controlled positive output synchronous buck-boost converter

  Narasimharaju, B. L., Bharma, G., Koreboina, V. B. & Reddy, U. R., 29-03-2016, 12th IEEE International Conference Electronics, Energy, Environment, Communication, Computer, Control: (E3-C3), INDICON 2015. Institute of Electrical and Electronics Engineers Inc., 7443348. (12th IEEE International Conference Electronics, Energy, Environment, Communication, Computer, Control: (E3-C3), INDICON 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Modeling and analysis of a solar minichannel flat plate collector system and optimization of operating conditions using particle swarms

  Mohan, S., Dinesha, P. & Iyengar, A. S., 01-05-2021, In: Thermal Science and Engineering Progress. 22, 100855.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Modeling & verification of sliding window protocol with data loss and intruder detection using NuSMV

  Sinha, A., Ry, A. & Singh, S., 12-12-2012, Proceedings of the 2nd International Conference on Computational Science, Engineering and Information, CCSEIT 2012. p. 352-357 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Modeling, simulation and PC based implementation of a closed loop speed control of VSI fed induction motor drive

  Koreboina, V. B., Magajikondi, S. J. & Raju, A. B., 2011, India International Conference on Power Electronics, IICPE 2010. 5728065. (India International Conference on Power Electronics, IICPE 2010).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  5 Citations (Scopus)

• Model identification of rotary inverted pendulum using artificial neural networks

  Chandran, D., Krishna, B., George, V. I. & Thirunavukkarasu, I., 28-09-2015, 2015 International Conference on Recent Developments in Control, Automation and Power Engineering, RDCAPE 2015. Institute of Electrical and Electronics Engineers Inc., p. 146-150 5 p. 7281385

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Model checking message exchange in location based services

  Moily, A., Prasanna, G., Shetty, K. S. & Singh, S., 30-12-2010, 2010 International Conference on Computer and Communication Technology, ICCCT-2010. p. 164-167 4 p. 5640417

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Model-based manipulator control and the computational cost

  Soumya, S. & Guruprasad, K. R., 01-01-2018, In: Journal of Advanced Research in Dynamical and Control Systems. 10, 12, p. 319-326 8 p.

  Research output: Contribution to journal › Article › peer-review

• Model based evaluation of exterior daylight illuminance distribution

  Colaco, S. G., Kurian, C. P., George, V. I. & Colaco, A. M., 2009, In: Building Simulation. 2, 2, p. 85-94 10 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Model-Based Evaluation and Comparative Analysis of Biological Nutrient Removal Processes

  Khatri, N., Khatri, K. K. & Sharma, A., 2022, Sustainable Infrastructure Development - Select Proceedings of ICSIDIA 2020. Singh, V. P., Li, Z., Siddiqui, N. A. & Patel, H. (eds.). Springer Science and Business Media Deutschland GmbH, p. 125-133 9 p. (Lecture Notes in Civil Engineering; vol. 199).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Model based control using C2000 microcontroller

  Kumar, K. N. N. A. & Kurian, C. P., 2014, Proceedings of the 2014 International Conference on Advances in Energy Conversion Technologies - Intelligent Energy Management: Technologies and Challenges, ICAECT 2014. IEEE Computer Society, p. 13-20 8 p. 6757054

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)