Find Research outputs

Search results

• Conference article

  Experimental validation of energy parameters in parabolic trough collector with plain absorber and analysis of heat transfer enhancement techniques

  Bilal, F. R., Arunachala, U. C. & Sandeep, H. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012030.

  Research output: Contribution to journal › Conference article › peer-review

  • troughs
  • plains
  • accumulators
  • absorbers
  • heat transfer
  7 Citations (Scopus)

• Exploring Energy Conservation in Office Buildings with Thermal Comfort Criterion Towards Sustainable New Developments in Warm and Humid Climate

  Kini, P., Garg, N. K. & Kamath, K., 01-03-2017, In: Energy Procedia. 111, p. 277-286 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Office buildings
  • Thermal comfort
  • Sustainable development
  • Energy conservation
  • Smart city
  5 Citations (Scopus)

• Fabrication and characterization of ZnO/AI/ZnO multilayers by simultaneous DC and RF magnetron sputtering

  Nagaraja, K. K., Kumar, A. S. & Nagaraja, H. S., 01-01-2015, In: IOP Conference Series: Materials Science and Engineering. 73, 1, 012071.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Transparent electrodes
  • Magnetron sputtering
  • Opacity
  • Optical properties
  • Electric Conductivity

• Fabrication and Mechanical characterization of aluminium [6061] with conventionally prepared bamboocharcoal

  Chethan, K. N., Keni, L. G., Padmaraj, N. H., Dias, A. & Jain, R., 01-01-2018, In: Materials Today: Proceedings. 5, 2, p. 3465-3475 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Charcoal
  • Aluminum
  • Bamboo
  • Fabrication
  • Hardness
  3 Citations (Scopus)

• Fabrication and performance analysis of concentrated hybrid photovoltaic system

  Murthy, K., Daniel, A., Concessao, L., Roy, H. A. & Ganesha, A., 09-01-2018, In: MATEC Web of Conferences. 144, 04023.

  Research output: Contribution to journal › Conference article › peer-review

  • Solar radiation
  • Fabrication
  • Photovoltaic cells
  • Waste heat
  • Sun

• Fabrication and tribological response of aluminium 6061 hybrid composite reinforced with bamboo char and boron carbide micro-fillers

  Chethan, K. N., Pai, A., Keni, L. G., Singhal, A. & Sinha, S., 03-03-2018, In: IOP Conference Series: Materials Science and Engineering. 310, 1, 012028.

  Research output: Contribution to journal › Conference article › peer-review

  • Boron carbide
  • Charcoal
  • Bamboo
  • Aluminum
  • Fillers
  5 Citations (Scopus)

• Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

  Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Phase structure
  • Bainite
  • Steel
  • Ferrite
  • Characterization (materials science)
  5 Citations (Scopus)

• Friction stir welding of Aluminium matrix composites - A Review

  Subramanya, P., Amar, M., Arun, S., Mervin, H. & Shrikantha, R., 09-01-2018, In: MATEC Web of Conferences. 144, 03002.

  Research output: Contribution to journal › Conference article › peer-review

  • Friction stir welding
  • Aluminum
  • Welding
  • Composite materials
  • Melting point
  4 Citations (Scopus)

• Geometrical guidance algorithm for soft landing on lunar surface

  Rijesh, M. P., Sijo, G., Philip, N. K. & Natarajan, P., 01-01-2014, In: IFAC Proceedings Volumes (IFAC-PapersOnline). 3, PART 1, p. 14-19 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Missiles
  • Electronic guidance systems
  • Lunar landing
  • Braking
  • Gravitation
  3 Citations (Scopus)

• Green synthesis and structural characterization of silver nanoparticles synthesized using the pod extract of Clitoria ternatea and its application towards dye degradation

  Varadavenkatesan, T., Vinayagam, R. & Selvaraj, R., 01-01-2019, In: Materials Today: Proceedings. 23, p. 27-29 3 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Silver nanoparticles
  • Dyes
  • Coloring Agents
  • Degradation
  • Zeta potential
  8 Citations (Scopus)

• Green synthesis of silver nanoparticles using Thunbergia grandiflora flower extract and its catalytic action in reduction of Congo red dye

  Varadavenkatesan, T., Selvaraj, R. & Vinayagam, R., 01-01-2019, In: Materials Today: Proceedings. 23, p. 39-42 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Silver nanoparticles
  • Congo Red
  • Dyes
  • Nanoparticles
  • Coloring Agents
  7 Citations (Scopus)

• Grouping of Distributed Data at Multiple Sites by Sustaining the Privacy of Data

  Sumana, M. & Hareesha, K. S., 01-01-2020, In: Procedia Computer Science. 171, p. 1688-1697 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

• Haemodynamic study of Flow in concentric and eccentric stenosed carotid Artery

  Khader, S. M. A., Pai, R., Kamath, G., Zuber, M. & Rao, V. R. K., 09-01-2018, In: MATEC Web of Conferences. 144, 01024.

  Research output: Contribution to journal › Conference article › peer-review

  • 17-hydroxyestrane-3-carbonitrile
  • Hemodynamics
  • Flow separation
  • Transient analysis
  • Vortex flow

• Heat treatment and mechanical characterization of LM-25/tungsten carbide metal matrix composites

  Hegde, N. T., Pai, D. & Hegde, R., 01-01-2019, In: Materials Today: Proceedings. 19, p. 810-817 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • tungsten carbide
  • Tungsten carbide
  • Characterization (materials science)
  • Metals
  • Heat treatment
  4 Citations (Scopus)

• Hemodynamics of Idealized Carotid Artery

  Puritipati, C., Keri, V. & Kumar, N., 09-01-2018, In: MATEC Web of Conferences. 144, 01020.

  Research output: Contribution to journal › Conference article › peer-review

  • Hemodynamics
  • Shear stress
  • Blood
  • Non Newtonian flow
  • Geometry

• Hygrothermal Studies on GFRP Composites: A Review

  Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In: MATEC Web of Conferences. 144, 02026.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Composite materials
  • Environmental chambers
  7 Citations (Scopus)

• 'I can write two but not 2': Evidence for domain-specific within-modality dissociation for number digits

  Krishnan, G., Pai, A., Tiwari, S. & Rao, S. N., 20-10-2011, In: Procedia - Social and Behavioral Sciences. 23, p. 73-74 2 p.

  Research output: Contribution to journal › Conference article › peer-review

• Image Captioning and Comparison of Different Encoders

  Pal, A., Kar, S., Taneja, A. & Jadoun, V. K., 13-05-2020, In: Journal of Physics: Conference Series. 1478, 1, 012004.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • coders
  • natural language processing
  • sentences
  • computer vision
  • image processing

• Implementation of lean techniques for sustainable workflow process in Indian motor manufacturing unit

  Mahajan, M., Chistopher, K. B., Harshan & Shiva Prasad, H. C., 01-01-2019, In: Procedia Manufacturing. 35, p. 1196-1204 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Materials handling
  • Corrugated materials
  • Raw materials
  • Deforestation
  • Packaging materials
  2 Citations (Scopus)

• Improved anomaly detection based on integrated multi-scale principal component analysis using wavelets: An application to high dimensional processes

  Ramakrishna Kini, K. & Madakyaru, M., 2020, In: IFAC-PapersOnLine. 53, 1, p. 398-403 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Anomaly detection
  • Principal component analysis
  • Decomposition
  • Data handling
  • Process monitoring

• Improvement in productivity through TPM Implementation

  Thorat, R. & Mahesha, G. T., 01-01-2020, In: Materials Today: Proceedings. 24, p. 1508-1517 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Productivity
  • Injection molding
  • Plastics molding
  • Industry
  • Costs
  1 Citation (Scopus)

• Improvement of Overall Equipment Efficiency of Machine by SMED

  Bhade, S. & Hegde, S., 2018, In: Materials Today: Proceedings. 24, p. 463-472 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Lean production
  • Automobiles
  • Profitability
  • Industry
  • Productivity

• Influence of Drilling Parameters on Torque during Drilling of GFRP Composites Using Response Surface Methodology

  Mohan, N. S. & Kulkarni, S. M., 06-02-2018, In: Journal of Physics: Conference Series. 953, 1, 012031.

  Research output: Contribution to journal › Conference article › peer-review

  • drilling
  • torque
  • drill bits
  • methodology
  • composite materials
  4 Citations (Scopus)

• Influence of Farmer demographics and Supply Chain Issues on Organized Retailer Performance

  Prabhu, A., Giridhar Kamath, B., Karthik, A. & Sinha, K., 09-01-2018, In: MATEC Web of Conferences. 144, 05010.

  Research output: Contribution to journal › Conference article › peer-review

  • Supply chains
  • Health
  • Vegetables
  • Nutrition
  • Fruits

• Influence of marine environment on mechanical properties of glass fiber reinforced composites

  Padmaraj, N. H., Chethan, K. N., Utkarsh, S., Banerjee, S. & Utkarsh, 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012132.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Water
  • Mechanical properties
  • Polyesters
  1 Citation (Scopus)

• Influence of Molar Concentration on the Structure and Optical Properties of ZnO Films Grown by Spray Pyrolysis Method

  Sindhu, H. S., Joishy, S., Rajendra, B. V. & Babu, P. D., 01-01-2018, In: IOP Conference Series: Materials Science and Engineering. 360, 1, 012051.

  Research output: Contribution to journal › Conference article › peer-review

  • Spray pyrolysis
  • Molar concentration
  • Optical properties
  • Band structure
  • Energy gap

• Influence of post curing on GFRP hybrid composite

  Chavan, V. R., DInesh, K. R., Veeresh, K., Algur, V. & Shettar, M., 09-01-2018, In: MATEC Web of Conferences. 144, 02011.

  Research output: Contribution to journal › Conference article › peer-review

  • Curing
  • Composite materials
  • fiberglass
  • Synthetic fibers
  • Natural fibers

• Influence of Sawdust Bio-filler on the Tensile, Flexural, and Impact Properties of Mangifera Indica Leaf Stalk Fibre Reinforced Polyester Composites

  Heckadka, S. S., Nayak, S. Y., Gouthaman, P. V., Talwar, A., Ravishankar, V. A., Thomas, L. G. & Mathur, A., 09-01-2018, In: MATEC Web of Conferences. 144, 02024.

  Research output: Contribution to journal › Conference article › peer-review

  • Sawdust
  • Polyesters
  • Tensile properties
  • Fillers
  • Sodium hydroxide
  2 Citations (Scopus)

• Innovative small satellite structural concept for effective system integration

  Saikia, A., 01-01-2016, In: Proceedings of the International Astronautical Congress, IAC.

  Research output: Contribution to journal › Conference article › peer-review

  • systems integration
  • Small satellites
  • Electric wiring
  • wiring
  • Wire

• Inverse conduction method using finite difference method

  Venkata Sai Jitin, J. N. & Bhagat, A. R., 13-07-2018, In: IOP Conference Series: Materials Science and Engineering. 377, 1, 012015.

  Research output: Contribution to journal › Conference article › peer-review

  • Finite difference method
  • Heat flux
  • Thermocouples
  • Temperature
  • Frequency division multiplexing

• Investigating the effect of chitosan's degree of deacetylation on size of the nanoparticle

  Rodrigues, F. C., Devi, N. G., Koteshwara, K. B. & Thakur, G., 26-06-2020, In: IOP Conference Series: Materials Science and Engineering. 872, 1, 012109.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Chitosan
  • Nanoparticles
  • triphosphoric acid
  • Particle size
  • Chitin

• Investigation for the improvement of film cooling effectiveness on a high pressure Turbine aerofoil with shaped film holes

  Suresh, B., Abhilash, P. S., Yagnesh Sharma, N., Kesavan, V. & Kishore Prasad, D., 01-01-2018, In: International Conference on Computational Methods for Thermal Problems. 223309, p. 860-864 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Film Cooling
  • Turbine
  • Airfoils
  • Turbines
  • Cooling

• Investigation of tensile properties of RTV Silicone based Isotropic Magnetorheological Elastomers.

  Sandesh, B., Sriharsha, H., Rao Sathish, U. & Nikhil, G., 09-01-2018, In: MATEC Web of Conferences. 144, 02015.

  Research output: Contribution to journal › Conference article › peer-review

  • Elastomers
  • Vulcanization
  • Silicones
  • Tensile properties
  • Temperature
  1 Citation (Scopus)

• Investigation on microstructure and mechanical properties of Friction Stir Welded AA6061-4.5Cu-10SiC composite

  Herbert, M. A., Shettigar, A. K., Nigalye, A. V. & Rao, S. S., 03-03-2016, In: IOP Conference Series: Materials Science and Engineering. 114, 1, 012125.

  Research output: Contribution to journal › Conference article › peer-review

  • Friction
  • Microstructure
  • Mechanical properties
  • Composite materials
  • Metals
  4 Citations (Scopus)

• Knowledge Base Ontology Building for Fraud Detection Using Topic Modeling

  Attigeri, G., Manohara Pai, M. M., Pai, R. M. & Kulkarni, R., 01-01-2018, In: Procedia Computer Science. 135, p. 369-376 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Ontology
  • Analog to digital conversion
  • Industry
  • Experiments
  2 Citations (Scopus)

• Lithium-Ion Battery Management System: A Lifecycle Evaluation Model for the Use in the Development of Electric Vehicles

  Sisodia, A. & Monteiro, J., 09-01-2018, In: MATEC Web of Conferences. 144, 04020.

  Research output: Contribution to journal › Conference article › peer-review

  • Battery management systems
  • Lithium-ion batteries
  • Electric vehicles
  • Lithium
  • Life cycle
  1 Citation (Scopus)

• Matching before and after Surgery Faces

  Bansal, A. & Shetty, N. P., 01-01-2018, In: Procedia Computer Science. 132, p. 141-148 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Surgery
  • Biometrics
  • Face recognition
  • Seals
  • Interpolation
  2 Citations (Scopus)

• Measurement of global solar radiation data using raspberry Pi and its estimation using genetic algorithm

  Priya, S. S., Borkataky, A., Reddy, S. & Thirunavukkarasu, I., 26-02-2018, In: MATEC Web of Conferences. 153, 07004.

  Research output: Contribution to journal › Conference article › peer-review

  • Rubus
  • Solar radiation
  • Genetic algorithms
  • Solar energy
  • Artificial intelligence

• Mechanical characterization of precipitation hardened Al7075-grey cast iron powder reinforced metal matrix composites

  Hindi, J., Achuta, K. & Amar, M., 09-01-2018, In: MATEC Web of Conferences. 144, 02007.

  Research output: Contribution to journal › Conference article › peer-review

  • Iron powder
  • Cast iron
  • Metals
  • Hardness
  • Composite materials

• Mechanical property evaluation of alkali-treated jute fiber reinforced bio-epoxy composite materials

  Shivamurthy, B., Naik, N., Thimappa, B. H. S. & Bhat, R., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2116-2120 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Jute fibers
  • Alkalies
  • Mechanical properties
  • Composite materials
  • Epoxy Resins
  1 Citation (Scopus)

• Metal oxide thin film for chemiresistive biosensing applications

  Anchan, B., Hegde, S., De, S. & Patil, A., 2019, In: Materials Today: Proceedings. 27, p. 440-442 3 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Oxide films
  • Zinc Oxide
  • Zinc oxide
  • Thin films
  • Metals

• Microstructure and positron behavior in FeCl3 doped PVA/PVP blend

  Ravindrachary, V., Bhajantri, R. F., Harisha, A., Ismayil & Ranganathaiah, C., 28-12-2009, In: Physica Status Solidi (C) Current Topics in Solid State Physics. 6, 11, p. 2438-2441 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • positrons
  • positron annihilation
  • life (durability)
  • microstructure
  • diffraction
  11 Citations (Scopus)

• MIT manipal at ImageCLef 2019 visual question answering in medical domain

  Thanki, A. & Makkithaya, K., 01-01-2019, In: CEUR Workshop Proceedings. 2380

  Research output: Contribution to journal › Conference article › peer-review

  • Deep learning

• Monitoring multivariate process using improved independent component analysis-generalized likelihood ratio strategy

  Ramakrishna Kini, K. & Madakyaru, M., 2020, In: IFAC-PapersOnLine. 53, 1, p. 392-397 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Independent component analysis
  • Fault detection
  • Monitoring
  • Process monitoring
  • Automation
  1 Citation (Scopus)

• Multi-area Economic Dispatch Using Improved Particle Swarm Optimization

  Jadoun, V. K., Gupta, N., Niazi, K. R., Swarnkar, A. & Bansal, R. C., 01-01-2015, In: Energy Procedia. 75, p. 1087-1092 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Particle swarm optimization (PSO)
  • Economics
  • Interchanges
  • Power generation
  • Hot Temperature
  12 Citations (Scopus)

• Multiple regression analysis to predict the value of a residential building and to compare with the conventional method values

  Shetty, D. V., Rao, B. P., Prakash, C. & Vaibhava, S., 22-12-2020, In: Journal of Physics: Conference Series. 1706, 1, 012118.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • regression analysis
  • income
  • India
  • arts
  • composite materials

• Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

  Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2039-2046 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Carbides
  • Polymers
  • Drilling
  1 Citation (Scopus)

• Multi Response Optimization of Friction Stir Welding Process Variables using TOPSIS approach

  Prabhu, S. R., Shettigar, A., Herbert, M. & Rao, S., 27-06-2018, In: IOP Conference Series: Materials Science and Engineering. 376, 1, 012134.

  Research output: Contribution to journal › Conference article › peer-review

  • Friction stir welding
  • silicon carbide
  • Welds
  • Hardness
  • Composite materials
  2 Citations (Scopus)

• Multi-response optimization of process parameters in AWJ machining of hybrid GFRP composite by grey relational method

  Deepak, D. & Paulo Davim, J., 01-01-2019, In: Procedia Manufacturing. 35, p. 1211-1221 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Machining
  • Composite materials
  • Analysis of variance (ANOVA)
  • Graphite
  • Delamination
  5 Citations (Scopus)

• Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

  Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In: Materials Today: Proceedings. 19, p. 333-338 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Surface roughness
  6 Citations (Scopus)