Find Research outputs

Search results

• Article

  Optimization, kinetics, equilibrium isotherms, and thermodynamics studies of coomassie violet dye adsorption using azadirachta indica (Neem) leaf adsorbent

  Divya, J. M., Palak, K. & Vairavel, P., 06-2020, In: Desalination and Water Treatment. 190, p. 353-382 30 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Optimization and life cycle cost analysis of renewable energy supply options for academic buildings - A case study

  Paragond, L. R. S., Kurian, C. P. & Singh, B. K., 01-01-2019, In: International Journal of Energy Economics and Policy. 9, 5, p. 224-236 13 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization and modeling of material removal rate in wire‐edm of silicon particle reinforced al6061 composite

  Doreswamy, D., Bongale, A. M., Piekarski, M., Bongale, A., Kumar, S., Pimenov, D. Y., Giasin, K. & Nadolny, K., 01-11-2021, In: Materials. 14, 21, 6420.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Optimization and performance evaluation of peptide-loaded monolithic poly-ε-caprolactone microspheres in mice bearing melanoma B16F1

  Shenoy, B. D., Venkatesh, M. & Udupa, N., 2002, In: Pharmazie. 57, 4, p. 256-260 5 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Optimization and prediction of hardness, wear and surface roughness on age hardened stellite 6 alloys

  Karthik, S. R., Londe, N. V., Shetty, R., Nayak, R. & Hedge, A., 2022, In: Manufacturing Review. 9, 10.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization and Validation of a Multiresidue Method for Screening of 126 Pesticide Residues in Herbal Raw Materials and Extracts Used as Ingredients in Ayurvedic Medicines and Dietary Supplements

  Koshy, R., Yadav, S., Rajeshkumar, R., Singh, V. K., Setty, M. M., Murali, B. & Agarwal, A., 27-04-2022, In: Journal of AOAC International. 105, 3, p. 748-758 11 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization and validation of indirect ELISA using truncated TssB protein for the serodiagnosis of glanders amongst equines

  Singha, H., Malik, P., Goyal, S. K., Khurana, S. K., Mukhopadhyay, C., Eshwara, V. K. & Singh, R. K., 06-03-2014, In: The Scientific World Journal. 2014, 469407.

  Research output: Contribution to journal › Article › peer-review
  16 Citations (Scopus)

• Optimization in high dose rate vaginal cylinder for vaginal cuff irradiation

  Sivakumar, S. S., Solomon, J. G. R., Supe, S. S., Vadhiraja, B. M., Rao, K. K. & Vidyasagar, M. S., 01-01-2008, In: Reports of Practical Oncology and Radiotherapy. 13, 1, p. 35-48 14 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Optimization of Aqueous Two-Phase Systems for the Recovery of Soluble Proteins from Tannery Wastewater Using Response Surface Methodology

  Raja, S. & Murty, V. R., 01-01-2013, In: Journal of Engineering (United States). 2013, 217483.

  Research output: Contribution to journal › Article › peer-review
  24 Citations (Scopus)

• Optimization of Axially Magnetized Stack Structured Permanent Magnet Thrust Bearing Using Three- Dimensional Mathematical Model

  Bekinal, S. I., Doddamani, M. & Jana, S., 01-05-2017, In: Journal of Tribology. 139, 3, 031101.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)

• Optimization of batch process parameters for congo red color removal by neurospora crassa live fungal biomass with wheat bran dual adsorbent using response surface methodology

  Vairavel, P. & Murty, V. R., 01-01-2018, In: Desalination and Water Treatment. 103, p. 84-101 18 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Optimization of chronomodulated delivery system coated with a blend of ethyl cellulose and Eudragit L100 by central composite design: In vitro and in vivo evaluation

  Ranjan, O. P., Nayak, U. Y., Reddy, M. S., Dengale, S. J., Musmade, P. B. & Udupa, N., 2014, In: Journal of Pharmaceutical Innovation. 9, 2, p. 95-105 11 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Optimization of cultural conditions for protease production by a fungal species

  Kamath, P., Subrahmanyam, V. M., Rao, J. & Raj, P., 2010, In: Indian Journal of Pharmaceutical Sciences. 72, 2, p. 161-166 6 p.

  Research output: Contribution to journal › Article › peer-review
  24 Citations (Scopus)

• Optimization of culture conditions for human bone marrow-derived mesenchymal stromal cell expansion in macrocarrier-based Tide Motion system

  Bhat, S., Chiew, G. G. Y., Ng, J. X., Lin, X. & Seetharam, R. N., 07-2021, In: Biotechnology Journal. 16, 7, 2000540.

  Research output: Contribution to journal › Article › peer-review

• Optimization of day-ahead energy storage system scheduling in microgrid using genetic algorithm and particle swarm optimization

  Raghavan, A., Maan, P. & Shenoy, A. K. B., 2020, In: IEEE Access. 8, p. 173068-173078 11 p., 3025673.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  16 Citations (Scopus)

• Optimization of delivery of betamethasone-dipropionate from skin preparation

  Bhat, M., Shenoy, S. D., Udupa, N. & Srinivas, C. R., 1995, In: Indian Drugs. 32, 5, p. 211-214 4 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Optimization of elastomeric passive engine mount using direct optimization method

  Vijay Kumar, K. & Shetty, N., 30-04-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 2, p. 121-130 10 p., IJMPERDAPR2018013.

  Research output: Contribution to journal › Article › peer-review

• Optimization of engine parameters in a bio diesel engine run with honge methyl ester using response surface methodology

  Kumar, S. & Dinesha, P., 01-09-2018, In: Measurement: Journal of the International Measurement Confederation. 125, p. 224-231 8 p.

  Research output: Contribution to journal › Article › peer-review
  53 Citations (Scopus)

• Optimization of FSW process parameters for maximum UTS of AA6061/rutile composites using Taguchi technique

  Prabhu, S. R., Shettigar, A., Herbert, M. A. & Rao, S. S., 04-2022, In: Scientia Iranica. 29, 2 B, p. 534-542 9 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization of glucoamylase production by Humicola grisea MTCC 352 in solid state fermentation

  Ramesh, V. & Murty, V. R., 01-07-2019, In: Chiang Mai University Journal of Natural Sciences. 18, 3, p. 251-266 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization of Hole Characteristics During Pulse Nd:YAG Laser Drilling of Commercially Pure Titanium Alloy

  Avvari, M., Manjaiah, M., Able, M., Laubscher, R. F. & Raghavendra, K., 01-06-2017, In: Lasers in Manufacturing and Materials Processing. 4, 2, p. 76-91 16 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Optimization of inbound logistics by implementing e-kanban system in an automobile accessories manufacturing unit – a case study

  Raog, K., Kenneth Michael, L. & Sriram, K. V., 01-06-2019, In: Quality - Access to Success. 20, 170, p. 106-111 6 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization of Inhibition Efficiency of a Schiff Base on Mild Steel in Acid Medium: Electrochemical and RSM Approach

  Kumari, P. & Lavanya, M., 09-2021, In: Journal of Bio- and Tribo-Corrosion. 7, 3, 110.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Optimization of inulinase production by a newly isolated Penicillium amphipolaria strain using solid-state fermentation of hardy sugarcane stems

  Das, D., Bhat M, R. & Selvaraj, R., 11-2020, In: Biocatalysis and Agricultural Biotechnology. 30, 101875.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Optimization of inulinase production by a newly isolated strain Aspergillus flavus var. flavus by solid state fermentation of Saccharum arundinaceum

  Das, D., Selvaraj, R. & Ramananda Bhat, M., 01-11-2019, In: Biocatalysis and Agricultural Biotechnology. 22, 101363.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Optimization of LED lighting system for horticulture application – A simulation

  Sowmya, R., Kurian, C. P. & Narasimhan, S., 01-01-2019, In: Journal of Advanced Research in Dynamical and Control Systems. 11, 1 Special Issue, p. 1221-1225 5 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization of material removal rate and surface characterization of wire electric discharge machined Ti-6Al-4V alloy by response surface method

  Doreswamy, D., Sai Shreyas, D., Bhat, S. K. & Rao, R. N., 2022, In: Manufacturing Review. 9, 15.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization of Microbial Leaching of Base Metals from a South African Sulfidic Nickel Ore Concentrate by Acidithiobacillus ferrooxidans

  Behera, S. K., Manjaiah, M., Sekar, S., Panda, S. K., Mavumengwana, V. & Mulaba-Bafubiandi, A. F., 03-07-2018, In: Geomicrobiology Journal. 35, 6, p. 447-459 13 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Optimization of parameters for transdermal permeation of insulin

  Chandrashekar, G., Bhat, R., Singh, M. K. & Udupa, N., 1994, In: Indian Journal of Pharmaceutical Sciences. 56, 6, p. 205-209 5 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Optimization of pediatric CT brain protocol to achieve reduced patient dose

  Karappara, J., Koteshwar, P., Panakkal, N. C. & Sukumar, S., 01-01-2020, In: Biomedical and Pharmacology Journal. 13, 1, p. 391-397 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization of pid controller gains of an aircraft pitch control system using particle swarm optimization algorithm

  Chowdhury, A. & Nair, V. G., 31-12-2017, In: International Journal of Mechanical and Production Engineering Research and Development. 7, 6, p. 223-229 7 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Optimization of preheating temperature for TiB₂reinforcement on the preparation of stir cast LM4 + TiB₂composites and effect of artificial aging on hardness improvement using ANOVA

  Srinivas, D., Gowrishankar, M. C., Sharma, S., Hegde, A., Gurumurthy, B. M. & Deepak, D., 2022, In: Manufacturing Review. 9, 8.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Optimization of reducing sugars production from agro-residue coconut leaflets using autoclave-assisted HCl hydrolysis with response surface methodology

  Shet, V. B., Varun, C., Aishwarya, U., Palan, A. M., Rao, S. U., Goveas, L. C., Raja, S., Rao, C. V. & Puttur, U., 01-06-2018, In: Agriculture and Natural Resources. 52, 3, p. 280-284 5 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Optimization of the brake parameter for a disc brake system to improve the heat dissipation using taguchi method

  Bhat, R. & Lee, K. S., 01-07-2017, In: International Journal of Mechanical Engineering and Technology. 8, 7, p. 44-52 9 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Optimization of the dielectric and optical parameters of 1,2,4-oxadiazole ferroelectric mesophase with the suspension of PVP capped gold nanoparticles

  Roy, A., Tripathi, P. K., Mahabaleshwara, S., Srinivasulu, M., Gangwar, R. K. & Manohar, R., 09-2020, In: Optical Materials. 107, 110021.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Optimization of the Parameters Influencing the Control of Dual-Phase AISI1040 Steel Corrosion in Sulphuric Acid Solution with Pectin as Inhibitor Using Response Surface Methodology

  Prabhu, D., Hiremath, P., Prabhu, P. R. & Gowrishankar, M. C., 04-2022, In: Protection of Metals and Physical Chemistry of Surfaces. 58, 2, p. 394-413 20 p.

  Research output: Contribution to journal › Article › peer-review

• Optimization of the parameters influencing the inhibition efficiency of 6063 Al alloy in 0.5 M NaOH using response surface methodology

  Prabhu, P. R., Prabhu, D. & Rao, P., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 51-64 14 p., IJMPERDAPR20205.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Optimization of thermal parameters in a double pipe heat exchanger with a twisted tape using response surface methodology

  Kumar, S. & Dinesha, P., 01-09-2018, In: Soft Computing. 22, 18, p. 6261-6270 10 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Optimization of time and temperature for thermal reclamation of furan resin based sand

  Monish, A. & Krishna, B. S. V. S. R., 01-06-2019, In: International Journal of Recent Technology and Engineering. 8, 1 Special Issue4, p. 120-124 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization of WDM lightwave systems (BAC) design using error control coding

  Mruthyunjaya, H. S., Umesh, G. & Sathish Kumar, M., 04-2007, In: Optical Fiber Technology. 13, 2, p. 156-159 4 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Optimization of wear behaviour of boron nitride filled polyaryletherketone composites by Taguchi approach

  Suresha, B., Shenoy, R. S., Bhat, R., Sohan, P. K. & Hemanth, R., 31-05-2019, In: Materials Research Express. 6, 8, 085329.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Optimized ANN-GA and experimental analysis of the performance and combustion characteristics of HCCI engine

  Anarghya, A., Rao, N., Nayak, N., Tirpude, A. R., Harshith, D. N. & Samarth, B. R., 05-03-2018, In: Applied Thermal Engineering. 132, p. 841-868 28 p.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)

• Optimized Dynamic Stochastic Resonance framework for enhancement of structural details of satellite images

  Asha, C. S., Singh, M., Suresh, S. & Lal, S., 11-2020, In: Remote Sensing Applications: Society and Environment. 20, 100415.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Optimized LIBS setup with echelle spectrograph-ICCD system for multi-elemental analysis

  Unnikrishnan, K., Alti, K., Nayak, R., Bernard, R., Khetarpal, N., Kartha, B., Santhosh, C., Gupta, P. & Suri, M., 06-05-2010, In: Journal of Instrumentation. 5, 4, P04005.

  Research output: Contribution to journal › Article › peer-review
  26 Citations (Scopus)

• Optimized multi-level elongated quinary patterns for the assessment of thyroid nodules in ultrasound images

  Raghavendra, U., Gudigar, A., Maithri, M., Gertych, A., Meiburger, K. M., Yeong, C. H., Madla, C., Kongmebhol, P., Molinari, F., Ng, K. H. & Acharya, U. R., 01-04-2018, In: Computers in Biology and Medicine. 95, p. 55-62 8 p.

  Research output: Contribution to journal › Article › peer-review
  26 Citations (Scopus)

• Optimized multistable stochastic resonance for the enhancement of pituitary microadenoma in MRI

  Singh, M., Verma, A. & Sharma, N., 05-2018, In: IEEE Journal of Biomedical and Health Informatics. 22, 3, p. 862-873 12 p.

  Research output: Contribution to journal › Article › peer-review
  22 Citations (Scopus)

• Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis

  Chethan, K. N., Mohammad, Z., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2020, In: Cogent Engineering. 7, 1, 1719575.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  9 Citations (Scopus)

• Optimizing activity recognition in video using evolutionary computation

  Yagnik, N. & Sharma, C., 2021, In: Engineering Letters. 29, 4, p. 1452-1461 10 p.

  Research output: Contribution to journal › Article › peer-review

• Optimizing construction of buildings by selecting optimal material for building elements

  Shivani, Nayak, G. & Sundhar, C., 01-04-2018, In: International Journal of Civil Engineering and Technology. 9, 4, p. 1145-1155 11 p.

  Research output: Contribution to journal › Article › peer-review

• Optimizing daylight glare and circadian entrainment in a Daylight-Artificial Light Integrated scheme

  Mathew, V., Kurian, C. P. & Augustine, N., 2022, In: IEEE Access. 10, p. 38174-38188 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)