Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Sathya Shankara Sharma
Article

Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In : Indian Journal of Science and Technology. 9, 37, 97422.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B4C particles

Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In : Indian Journal of Science and Technology. 9, 12, 88073.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Study on chip-morphology in turning of Ti-6Al-4V alloy under high pressure neat oil and soluble oil

Gowri Shankar, A., Shiva Prakash, B., Jayashree, C. & Sharma, S. S., 01-01-2013, In : International Journal of Earth Sciences and Engineering. 6, 4, p. 832-837 6 p.

Research output: Contribution to journalArticle

Study on dual-phase structure of AISI4140 steel

Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In : Indian Journal of Science and Technology. 9, 33, 93526.

Research output: Contribution to journalArticle

2 Citations (Scopus)
12 Citations (Scopus)

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
6 Citations (Scopus)
Open Access

Tensile fractography of artificially aged Al6061-B4C composites

Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In : Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

The hardness behaviour of TIG welded al6061 alloy using statistical tool

Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In : Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

Research output: Contribution to journalArticle

Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In : International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

Research output: Contribution to journalArticle

Conference article

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)

Hygrothermal Studies on GFRP Composites: A Review

Shettar, M., Chaudhary, A., Hussain, Z., Kini, U. A. & Sharma, S., 09-01-2018, In : MATEC Web of Conferences. 144, 02026.

Research output: Contribution to journalConference article

7 Citations (Scopus)

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Study on Spheroidization and Related Heat Treatments of Medium Carbon Alloy Steels

Harisha, S. R., Sharma, S., Kini, U. A. & Gowri Shankar, M. C., 09-01-2018, In : MATEC Web of Conferences. 144, 02008.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In : MATEC Web of Conferences. 77, 10006.

Research output: Contribution to journalConference article

Conference contribution

Effect of artificial aging on fracture behavior of Al6061-Silica (SiO2) composites

Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SICp composites

Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

FRP-Nanoclay hybrid composites: A review

Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Mechanical property association of dual phase and austempered aisi 4140 normalized steel

Sharma, S., Gurumurthy, B. M., Achutha Kini, U., Gowrishankar, M. C. & Shivaprakash, Y. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 174-179 6 p. (Materials Science Forum; vol. 995 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metallography & bulk hardness of artificially aged Al6061-B4C-SiC stir cast hybrid composites

Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Post solutionising rolling sway on the precipitation behaviour of eutectoid steel powder reinforced al7075 ternary alloy composites

Rajesh, Sharma, S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 9-14 6 p. (Materials Science Forum; vol. 995 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Tensile fractography of artificially aged al6061-sic+b4c hybrid composites

Sharma, S., Gowrishankar, M. C., Hiremath, P., Shettar, M. & Gurumurthy, B. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 995 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Review article

A review on finite element method for machining of composite materials

Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In : Composite Structures. 176, p. 790-802 13 p.

Research output: Contribution to journalReview article

31 Citations (Scopus)

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

3 Citations (Scopus)