Find Research outputs

Search results

• Article

  Design and development of smartphone-based imaging platform using electroluminescence illumination

  Banik, S., Melanthota, S. K., Dutta, S. & Mazumder, N., 05-2021, In: Results in Optics. 3, 100070.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design and development of surface modified epigallocatechin 3-gallate NanoCubogel for localized delivery to oral submucous fibrosis therapy

  Mehta, C. H., Narayan, R., Acharya, S. & Nayak, U. Y., 12-2021, In: Journal of Drug Delivery Science and Technology. 66, 102911.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and development of thiolated graphene oxide nanosheets for brain tumor targeting

  Nikam, A. N., More, M. P., Pandey, A. P., Patil, P. O., Patil, A. G. & Deshmukh, P. K., 02-07-2019, In: International Journal of Polymeric Materials and Polymeric Biomaterials.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)

• Design and development of tranexamic acid loaded film-forming gel to alleviate melasma

  Chevala, N. T., Dsouza, J. A., Saini, H. & Kumar, L., 12-2022, In: Journal of Cosmetic Dermatology. 21, 12, p. 6863-6874 12 p.

  Research output: Contribution to journal › Article › peer-review

• Design and evaluation of aceclofenac ocular inserts with special reference to cataracts and conjunctivitis

  Dave, V., Yadav, S., Paliwal, S., Sharma, S. & Kumar, D., 2013, In: Journal of Chinese Pharmaceutical Sciences. 22, 5, p. 449-455 7 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and Evaluation of a Self Write-Terminated Hybrid MTJ/CMOS Full Adder Based on LIM Structure

  Barla, P., Joshi, V. K. & Bhat, S., 30-05-2022, In: Journal of Circuits, Systems and Computers. 31, 8, 2250146.

  Research output: Contribution to journal › Article › peer-review

• Design and evaluation of captopril transdermal preparations

  Koteshwar, K. B., Udupa, N. & Kumar, V., 1992, In: Indian Drugs. 29, 15, p. 680-685 6 p.

  Research output: Contribution to journal › Article › peer-review
  25 Citations (Scopus)

• Design and evaluation of matrix diffusion controlled transdermal patches of Diltiazem hydrochloride

  Prabu, S. L., Shirwaikar, A., Shirwaikar, A., Kumar, A. & Jacob, A., 2008, In: Ars Pharmaceutica. 49, 3, p. 211-227 17 p.

  Research output: Contribution to journal › Article › peer-review

  6 Citations (Scopus)

• Design and evaluation of matrix type and membrane controlled transdermal delivery systems of nicotine suitable for use in smoking cessation

  Lewis, S., Pandey, S. & Udupa, N., 02-2006, In: Indian Journal of Pharmaceutical Sciences. 68, 2, p. 179-184 6 p.

  Research output: Contribution to journal › Article › peer-review
  38 Citations (Scopus)

• Design and evaluation of Norfloxacin dental implants

  Karunakar, B. & Udupa, N., 1993, In: Indian Journal of Pharmaceutical Sciences. 55, 2, p. 68-69 2 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and evaluation of tinidazole dental implants

  Karunakar, B., Sabu, K., Udupa, N. & Varma, B. R. R., 1994, In: Drug Development and Industrial Pharmacy. 20, 3, p. 409-416 8 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and Fabrication of Low-cost Microfluidic Channel for Biomedical Application

  Tiwari, S. K., Bhat, S. & Mahato, K. K., 01-12-2020, In: Scientific Reports. 10, 1, 9215.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Citations (Scopus)

• Design and fabrication of screen printed microheater

  Tiwari, S. K., Bhat, S. & Mahato, K. K., 01-08-2018, In: Microsystem Technologies. 24, 8, p. 3273-3281 9 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Design and Feasibility Verification of 6G Wireless Communication Systems with State of the Art Technologies

  Dilli, R., 2021, (Accepted/In press) In: International Journal of Wireless Information Networks.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  4 Citations (Scopus)

• Design and finite element study of Kevlar based combat helmet for protection against high-velocity impacts

  Stephen, C., Shivamurthy, B., Selvam, R., Behara, S. R., Mourad, A. H. I. & Kannan, S., 01-2022, In: Materials Today: Proceedings. 56, p. 3636-3641 6 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Design and implementation of a novel eye gaze recognition system based on scleral area for mnd patients using video processing

  Rupanagudi, S. R., Bhat, V. G., Karthik, R., Roopa, P., Manjunath, M., Ebenezer, G., Shashank, S., Pandith, H., Nitesh, R., Shandilya, A. & Ravithej, P., 2015, In: Advances in Intelligent Systems and Computing. 320, p. 569-579 11 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design and implementation of aquaculture resource planning using underwater sensor wireless network

  Shetty, S., Pai, R. M. & Pai, M. M. M., 01-01-2018, In: Cogent Engineering. 5, 1, p. 1-23 23 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  8 Citations (Scopus)

• Design and implementation of a smart controller in agriculture for improved productivity

  Sravani, V., Santhosh, K. V., Bhargava, S. & D'Almeida, V., 01-01-2018, In: Istanbul University - Journal of Electrical and Electronics Engineering. 18, 1, p. 45-51 7 p.

  Research output: Contribution to journal › Article › peer-review

• Design and implementation of single phase inverter based on Cuk converter for PV system

  Jayalaksmi, N. S., Gaonkar, D. N., Anandh, N. & Kumar, N. S., 2017, In: International Journal of Renewable Energy Research. 7, 2, p. 585-591 7 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Design and in vitro/in vivo evaluation of extended release matrix tablets of nateglinide

  Sharma, P. R. & Lewis, S. A., 2013, In: Journal of Young Pharmacists. 5, 4, p. 167-172 6 p.

  Research output: Contribution to journal › Article › peer-review
  8 Citations (Scopus)

• Design and in vitro evaluation of floating drug delivery system for an antipsychotic agent: A technical report

  Kar, M. & Reddy, M. S., 2006, In: PDA Journal of Pharmaceutical Science and Technology. 60, 6, p. 389-394 6 p.

  Research output: Contribution to journal › Article › peer-review
  6 Citations (Scopus)

• Design and measurement of performance parameters of micro strip patch antenna used for Wi - Max and C-band applications

  Pavitra, D. & Nayak, S. G., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, 4.41 Special Issue 41, p. 150-153 4 p.

  Research output: Contribution to journal › Article › peer-review

• Design and modeling of abrasive flow finishing of freeform surfaces of FDM printed femoral component of knee implant pattern

  Hashmi, A. W., Mali, H. S., Meena, A., Saxena, K. K., Puerta, A. P. V., Rao, U. S., Buddhi, D. & Mohammed, K. A., 2022, (Accepted/In press) In: International Journal on Interactive Design and Manufacturing.

  Research output: Contribution to journal › Article › peer-review

• Design and Modelling for LCL Filter for Measurement of THD Reduction in Different Modular Multilevel Converters

  Agarwal, A., Jatin & Jadoun, V. K., 2021, (Accepted/In press) In: Mapan - Journal of Metrology Society of India.

  Research output: Contribution to journal › Article › peer-review

• Design and modelling of hemispherical and flat dish end pressure vessel

  Poojary, A. T., Sharma, R. S., Patel, M. H., Sheth, D. U., Kini, C. R. & Nayak, R., 2015, In: Indian Journal of Science and Technology. 8, 33

  Research output: Contribution to journal › Article › peer-review

• Design and Numerical Analysis of an under Tray Diffuser of a Formula Student Car for Performance Improvement

  Tyagi, A. & Madhwesh, N., 13-10-2017, In: SAE Technical Papers. 2017-October

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and Optimization of Multi-ring Permanent Magnet Bearings for High-speed Rotors - A Computational Framework

  Kamath, C. R., Bhat, R., Bekinal, S. I., Vijay, G. S., Shetty, T. S. & Doddamani, M., 2021, In: Engineered Science. 16, p. 194-202 9 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and performance comparison of different adaptive control schemes for pitch angle control in a Twin-Rotor-MIMO-System

  Netto, W., Lakhani, R. & Meenatchi Sundaram, S., 01-10-2019, In: International Journal of Electrical and Computer Engineering. 9, 5, p. 4114-4129 16 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Design and performance evaluation of solar trickle down reactor for cypermethrin effluent treatment

  Shanmuga Priya, S., Ratna, M., Shrivastava, R. & Thirunavukkarasu, I., 04-2013, In: International Journal of ChemTech Research. 5, 2, p. 629-633 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and realization of MPC controller for type 1 diabetes system

  Srinivasan, C. R., Meenatchi Sundaram, S. & George, V. I., 01-01-2018, In: Journal of Advanced Research in Dynamical and Control Systems. 10, 6 Special Issue, p. 1238-1244 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and simulation of 6-DOF cylindrical robotic manipulator using finite element analysis

  Seth, A., Kuruvilla, J. K., Sharma, S., Duttagupta, J. & Jaiswal, A., 01-2022, In: Materials Today: Proceedings. 62, p. 1521-1525 5 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design and simulation of Kalman Filter for the estimation of tray temperatures in a binary distillation column

  Chopparapu, S. L., George, V. I., Thirunavukkarasu, I. & Bhat, V. S., 2017, In: International Journal of Pure and Applied Mathematics. 114, 9 Special Issue, p. 11-18 8 p.

  Research output: Contribution to journal › Article › peer-review

• Design and simulation of parallel microheater

  Tiwari, S. K., Bhat, S., Mahato, K. K. & Manjunath, B. B., 01-01-2018, In: Frontiers in Heat and Mass Transfer. 10, 9.

  Research output: Contribution to journal › Article › peer-review

• Design and simulation of single phase inverter for standalone active and reactive load

  Muratti, V. & Paragond, L. R. S., 01-01-2019, In: Journal of Advanced Research in Dynamical and Control Systems. 11, 4, p. 1879-1887 9 p.

  Research output: Contribution to journal › Article › peer-review

• Design and sv based verification of AMBA AXI protocol for SOC integration

  Samanth, R. & Nayak, S. G., 01-07-2019, In: International Journal of Recent Technology and Engineering. 8, 2, p. 1465-1469 5 p.

  Research output: Contribution to journal › Article › peer-review

• Design and synthesis: Novel quinazolin incorporated azetidinones and thiazolidinones as sedative, antibacterial and antifungal agents

  Panda, S. S., Chowdary, P. V. R. & Rani, S., 2008, In: Indian Drugs. 45, 2, p. 84-89 6 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design and synthesis of 2-quinolones as antioxidants and antimicrobials: A rational approach

  Jayashree, B. S., Thomas, S. & Nayak, Y., 03-2010, In: Medicinal Chemistry Research. 19, 2, p. 193-209 17 p.

  Research output: Contribution to journal › Article › peer-review
  61 Citations (Scopus)

• Design and synthesis of certain mesoionic sydnonyl styrylketones as potential nonsteroidal antiinflammatory agents

  Deshpande, S. R., Pai, K. V. & Pai, R. S., 2011, In: Arzneimittel-Forschung/Drug Research. 61, 3, p. 180-185 6 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Design and synthesis of novel 2-phenyl-5-(1,3-diphenyl-1H-pyrazol-4-yl)-1, 3,4-oxadiazoles as selective COX-2 inhibitors with potent anti-inflammatory activity

  Bansal, S., Bala, M., Suthar, S. K., Choudhary, S., Bhattacharya, S., Bhardwaj, V., Singla, S. & Joseph, A., 2014, In: European Journal of Medicinal Chemistry. 80, p. 167-174 8 p.

  Research output: Contribution to journal › Article › peer-review
  86 Citations (Scopus)

• Design and synthesis of novel 4-(4-oxo-2-arylthiazolidin-3-yl) benzenesulfonamides as selective inhibitors of carbonic anhydrase IX over I and II with potential anticancer activity

  Suthar, S. K., Bansal, S., Lohan, S., Modak, V., Chaudhary, A. & Tiwari, A., 2013, In: European Journal of Medicinal Chemistry. 66, p. 372-379 8 p.

  Research output: Contribution to journal › Article › peer-review
  26 Citations (Scopus)

• Design and synthesis of polyindole - ZnO nano composite for NLO applications

  Vishnumurthy, K. A., Pramodini, S., Poornesh, P., Nagaraja, K. K. & Ahipa, T. N., 01-2023, In: Journal of the Indian Chemical Society. 100, 1, 100827.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design development and evaluation of alfuzosin hydrochloride extended release tablets by using natural and synthetic polymers

  Reddy, S. & Dinakar, 24-07-2012, In: Der Pharmacia Lettre. 4, 3, p. 775-781 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design framework for a data mart in the neonatal intensive care unit

  Shirwaikar, R. D., Dinesh Acharya, U., Makkithaya, K., Mallayaswamy, S. & Lewis, L. E. S., 01-01-2018, In: Critical Reviews in Biomedical Engineering. 46, 3, p. 221-243 23 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Designing a mobile health intervention for preterm home care: Application of conceptual framework

  Phagdol, T., Nayak, B. S., Lewis, L. E., Margaret, B. & George, A., 01-01-2022, In: Public Health Nursing. 39, 1, p. 296-302 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Designing and Conducting Knowledge, Attitude, and Practice Surveys in Psychiatry: Practical Guidance

  Andrade, C., Menon, V., Ameen, S. & Kumar Praharaj, S., 09-2020, In: Indian Journal of Psychological Medicine. 42, 5, p. 478-481 4 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  37 Citations (Scopus)

• Designing NiCo₂S₄-Acetylene black engrained nitrogen-doped porous reduced graphene oxide nanocomposites conducting network: As positive/negative electrode combinations for high energy density of asymmetric supercapacitor and hydrogen evolution reaction

  D N, S., M, S., P, S. & S, S. K., 01-12-2022, In: Materials Chemistry and Physics. 292, 126812.

  Research output: Contribution to journal › Article › peer-review

• DESIGNING OF STABLE CO-CRYSTALS OF AZITHROMYCIN USING SUITABLE COFORMERS

  Srinivas, P. P., Prabhu, N., Vasantharaju, S. G., Patel, N., Pai, A., Pai, V. & Sathyanarayana, M. B., 01-10-2022, In: Rasayan Journal of Chemistry. 15, 4, p. 2417-2428 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Designing of Stable Cocrystals of Cytarabine and Doxorubicin HCl Using Suitable Coformers

  Dheeraj, H. M., Awasthi, A., Pai, A., Birangal, S., Vasanthraju, S. G., Pai, G. & Sathyanarayana, M. B., 2021, In: Latin American Journal of Pharmacy. 40, 1, p. 39-48 10 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Designing of stable co-crystals of zoledronic acid using suitable coformers

  Varma, A., Laxmi, P., Pai, A., Pai, G., Vasantharaju, S. G. & Sathyanarayana, M. B., 01-01-2019, In: Chemical and Pharmaceutical Bulletin. 67, 8, p. 816-823 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Citations (Scopus)

• Designing passive solar building enclosures using hygroscopic materials: A conceptual framework

  Madhuraj, P. C. & Sudhakumar, J., 01-06-2012, In: Environmental Quality Management. 21, 4, p. 61-68 8 p.

  Research output: Contribution to journal › Article › peer-review