Find Research outputs

Search results

• Design of an Adaptive Calibration Technique Using Data Fusion for Pressure Measurement

  Santhosh, K. V. & Navada, B. R., 01-01-2018, Advances in Communication, Devices and Networking - Proceedings of ICCDN 2017. Springer Verlag, p. 817-826 10 p. (Lecture Notes in Electrical Engineering; vol. 462).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design of an adaptive calibration technique using Support Vector Machine for LVDT

  Santhosh, K. V. & Roy, B. K., 2014, Advances in Signal Processing and Intelligent Recognition Systems. Springer Verlag, Vol. 264. p. 151-160 10 p. (Advances in Intelligent Systems and Computing; vol. 264).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Design of an adaptive controller for level process for variation in temperature using multi-sensor data fusion

  Santhosh, K. V., 10-03-2014, Proceedings of International Conference on Circuits, Communication, Control and Computing, I4C 2014. Institute of Electrical and Electronics Engineers Inc., p. 161-164 4 p. 7057781

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of an adaptive soft calibration circuit for LVDT

  Santhosh, K. V. & Akanksha, 07-02-2018, International Conference on Electrical, Electronics, Communication Computer Technologies and Optimization Techniques, ICEECCOT 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 524-528 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Design of an adaptive soft sensor for measurement of liquid level independent of liquid

  Santhosh, K. V. & Nayak, S., 01-01-2019, Lecture Notes in Electrical Engineering. Springer Verlag, p. 523-535 13 p. (Lecture Notes in Electrical Engineering; vol. 478).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  2 Citations (Scopus)

• Design of an anti-theft vehicle tracking system with a smartphone application

  Shruthi, K., Ramaprasad, P., Ray, R., Naik, M. A. & Pansari, S., 10-06-2016, Proceedings - IEEE International Conference on Information Processing, ICIP 2015. Institute of Electrical and Electronics Engineers Inc., p. 755-760 6 p. 7489483

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  22 Citations (Scopus)

• Design of an Automated Power Generation Unit using Biomass

  Joseph, C., Vadala, A. & Bellam, S., 01-04-2019, 2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019. Institute of Electrical and Electronics Engineers Inc., p. 489-492 4 p. 8776783. (2019 International Conference on Automation, Computational and Technology Management, ICACTM 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of an Efficient User Authentication Mechanism using Enhanced Version of Otway-Rees Protocol

  Krishna, P. K., Muniyal, B. & Bhuva, M. J., 2016, Proceedings of the International Conference on Inventive Computation Technologies, ICICT 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016. 7830176

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of an electrolarynx driving source for improved vowel quality

  Madhushankara, M., Bhat, S. & Prasad, K., 01-01-2017, In: Journal of Advanced Research in Dynamical and Control Systems. 9, Special Issue 15, p. 870-876 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design of an energy harvesting system for wireless power transmission using microstrip antenna

  Das, T. T., Vinayak, S. & Pai, S. N., 01-01-2019, Lecture Notes in Electrical Engineering. Springer Verlag, p. 481-494 14 p. (Lecture Notes in Electrical Engineering; vol. 478).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  2 Citations (Scopus)

• Design of a new in-flight separator for heavy and superheavy fusion and transfer products

  Heinz, S., Barth, W., Franczak, B., Geissel, H., Gupta, M., Hofmann, S., Mickat, S., Münzenberg, G., Plaß, W. R., Scheidenberger, C., Weick, H. & Winkler, M., 15-12-2013, In: Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. 317, PART B, p. 354-356 3 p.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Design of an Instrument for Liquid Level Measurement and Concentration Analysis Using Multisensor Data Fusion

  Santhosh, K. V., Joy, B. & Rao, S., 01-01-2020, In: Journal of Sensors. 2020, 4259509.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  13 Citations (Scopus)

• Design of an optimal observer for making liquid level control loop robust to variations in transmission parameters

  Krishnan Venkata, S., E Silva, N. N. & Nair, N., 01-01-2020, In: Cogent Engineering. 7, 1, 1840688.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of a novel non-volatile hybrid spintronic true random number generator

  Jape, S., Joshi, V. K. & Barla, P., 05-2022, In: International Journal of Circuit Theory and Applications. 50, 5, p. 1487-1501 15 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design of Apnea Detector for Health Care System

  Pant, V., Kamath, S., Sharma, P. & Shrivastava, V., 2022, 3rd International Conference on Electronics and Sustainable Communication Systems, ICESC 2022 - Proceedings. Publ by IEEE, p. 68-72 5 p. (3rd International Conference on Electronics and Sustainable Communication Systems, ICESC 2022 - Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• Design of a Proactive Distance Handover Algorithm for WSN: A Case Study-Based Approach

  Saketh, M. S., Reddy, N. S. & Dhar, S., 01-01-2018, Advances in Communication, Devices and Networking - Proceedings of ICCDN 2017. Springer Verlag, p. 447-457 11 p. (Lecture Notes in Electrical Engineering; vol. 462).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of aqueous two-phase systems for purification of hyaluronic acid produced by metabolically engineered Lactococcus lactis

  Rajendran, V., Puvendran, K., Guru, B. R. & Jayaraman, G., 01-02-2016, In: Journal of Separation Science. 39, 4, p. 655-662 8 p.

  Research output: Contribution to journal › Article › peer-review
  14 Citations (Scopus)

• Design of a Six-Port Compact UWB MIMO Antenna with a Distinctive DGS for Improved Isolation

  Kumar, P., Pathan, S., Kumar, O. P., Vincent, S., Nanjappa, Y., Kumar, P., Shetty, P. & Ali, T., 2022, In: IEEE Access. 10, p. 112964-112974 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of a soft sensing technique for measuring pitch and yaw angular positions for a Twin Rotor MIMO System

  Venkata, S. K., Nayak, S., Vemulapalli, S. & Shankar, M., 2021, In: F1000Research. 10, 342.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of a Taguchi-GRA optimized PID and adaptive PID controllers for speed control of DC motor

  George, M. A. & Kamat, D. V., 2021, In: Archives of Electrical Engineering. 70, 4, p. 759-775 17 p.

  Research output: Contribution to journal › Article › peer-review

• Design of centralized robust pi controller for a multivariable process

  Bhat, V. S., Thirunavukkarasu, I. & Priya, S. S., 01-05-2018, In: Journal of Engineering Science and Technology. 13, 5, p. 1253-1273 21 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Design of CMOS based Programmable Gain Operational Amplifier

  Dessai, S. R., Keny, P., Gaitonde, U. & Chandra, M. V. S., 01-12-2013, Proceedings - RSM 2013: 2013 IEEE Regional Symposium on Micro and Nano Electronics. p. 139-142 4 p. 6706492

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Design of cultural conditions for production of chondroitinase by aspergillus Niger using design of experiments

  Kasinathan, N., Subrahmanyam, V. M. & Josyula, V. R., 2015, In: Indian Drugs. 52, 6, p. 24-32 9 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design of dual hormone blood glucose therapy and comparison with single hormone using MPC algorithm

  Dias, C. C., Kamath, S. & Vidyasagar, S., 01-10-2020, In: IET Systems Biology. 14, 5, p. 297-306 10 p.

  Research output: Contribution to journal › Article › peer-review

• Design of ECM Functionalized Polycaprolactone Aligned Nanofibers for Peripheral Nerve Tissue Engineering

  Nune, M., Bhat, M. & Nagarajan, A., 04-2022, In: Journal of Medical and Biological Engineering. 42, 2, p. 147-156 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Design of electrolarynx to increase energy efficiency by varying the driving source

  Maila, M., Bhat, S. & Prasad, K., 21-07-2020, In: International Journal of Technology. 11, 3, p. 554-563 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of estimator for computing yaw and pitch for a twin rotor MIMO system

  Santhosh, K. V. & Mohanty, P., 2020, In: International Journal of Mechanics. 14, p. 79-86 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Design of estimator for level monitoring using data driven model

  Shenoy, V. & Santhosh, K. V., 19-01-2021, Proceedings of 2nd International Conference on Computation, Automation and Knowledge Management, ICCAKM 2021. Institute of Electrical and Electronics Engineers Inc., p. 81-86 6 p. 9357704. (Proceedings of 2nd International Conference on Computation, Automation and Knowledge Management, ICCAKM 2021).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  2 Citations (Scopus)

• Design of Experiments in Pharmaceutical Development

  Dhoot, A. S., Fernandes, G. J., Naha, A., Rathnanand, M. & Kumar, L., 01-11-2019, In: Pharmaceutical Chemistry Journal.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Design of Flexural Members Reinforced with GFRP Bars

  Sethi, A. K., Kinjawadekar, T. A., Nagarajan, P. & Shashikala, A. P., 09-10-2020, In: IOP Conference Series: Materials Science and Engineering. 936, 1, 012036.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access
  1 Citation (Scopus)

• Design of framework for logic synthesis engine

  Pradhan, T., Kumar, P., Anil, N. S. & Bakshi, A., 2013, In: International Journal of Engineering and Technology. 5, 2, p. 1710-1715 6 p.

  Research output: Contribution to journal › Article › peer-review

• Design of fuzzy-PID controller for first order non-linear liquid level system

  Sravani, V. & Shinde, S., 01-01-2016, In: International Journal of Control Theory and Applications. 9, 39, p. 151-157 7 p.

  Research output: Contribution to journal › Article › peer-review

• Design of graphical user interface (GUI) for modeling and control of interacting tank level control system

  Mali, R. & Sundaram, S. M., 19-04-2018, 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies, ICICICT 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 1020-1023 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  4 Citations (Scopus)

• Design of high speed 32-bit floating point multiplier using Urdhva Triyagbhyam sutra of vedic mathematics

  Sai Venkatramana Prasada, G. S., Seshikala, G. & Niranjana, S., 01-07-2019, In: International Journal of Recent Technology and Engineering. 8, 2 Special issue 3, p. 1064-1067 4 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design of high speed carry select adder using modified parallel prefix adder

  Hebbar, A. R., Srivastava, P. & Joshi, V. K., 01-01-2018, In: Procedia Computer Science. 143, p. 317-324 8 p.

  Research output: Contribution to journal › Conference article › peer-review
  2 Citations (Scopus)

• Design of high-speed multiplier architecture based on vedic mathematics

  Chaitanya, C. V. S., Sundaresan, C., Venkateswaran, P. R., Prasad, K. & Siva Ramakrishna, V., 01-01-2018, In: International Journal of Engineering and Technology(UAE). 7, p. 105-108 4 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Design of H-infinity controller for VTOL tiltrotor unmanned aerial vehicle

  Hegde, N. T., George, V. I. & Gurudas Nayak, C., 01-01-2020, In: Journal of Advanced Research in Dynamical and Control Systems. 12, 3 Special Issue, p. 1061-1070 10 p.

  Research output: Contribution to journal › Article › peer-review

• Design of H-Infinity loop shaping controller for an unmanned aerial vehicle

  Hegde, N. T., George, V. I. & Nayak, C. G., 01-01-2018, In: Journal of Advanced Research in Dynamical and Control Systems. 10, 3 Special Issue, p. 65-74 10 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design of hybrid model predictive controller for a hybrid three tank system

  Joseph, C., George, V. I., Narayanan, N. & Saranya, T. S., 2015, In: International Journal of Control Theory and Applications. 8, 3, p. 1235-1242 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Design of hybrid multilayer plasmonic switch-cum-splitter with 90° bends

  Singh, M., 01-02-2019, In: Optik. 178, p. 902-908 7 p.

  Research output: Contribution to journal › Article › peer-review
  12 Citations (Scopus)

• Design of intelligent controller for temperature process on FPGA

  Paul, R., Shreesha, C., Prabhu, S. & Shinde, S., 01-01-2015, In: International Journal of Control Theory and Applications. 8, 3, p. 1113-1120 8 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Design of Kalman observer for estimation of in-flow

  Navada, B. R., Santhosh, K. V., Mazhar, A. & Singh, A. K., 19-04-2018, 2017 International Conference on Intelligent Computing, Instrumentation and Control Technologies, ICICICT 2017. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-January. p. 1010-1014 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Design of liquid level measurement system using multi sensor data fusion for improved characteristics and fault detection

  Santhosh, K. V. & Kumar, S., 01-10-2016, In: Journal of Electrical and Electronics Engineering. 9, 2, p. 67-72 6 p.

  Research output: Contribution to journal › Article › peer-review

• Design of LQR controller for Ballbot and hardware implementation

  Mocherlla, E. P., Netto, W. & Jesna, S., 01-07-2017, 2017 9th International Conference on Information Technology and Electrical Engineering, ICITEE 2017. Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. (2017 9th International Conference on Information Technology and Electrical Engineering, ICITEE 2017; vol. 2018-January).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of LQR-PI and MPC controllers for pitch control of a ballbot

  Mocherla, E. P. & Netto, W., 01-05-2017, In: International Journal of Mechanical Engineering and Technology. 8, 5, p. 877-885 9 p.

  Research output: Contribution to journal › Article › peer-review

• Design of microstrip antenna array and analysis of different beamforming techniques for mm-wave MIMO systems

  Kamath, S., Harsha, K. S., Dishotham & Zihan, M., 03-2019, Proceedings of the 3rd International Conference on Computing Methodologies and Communication, ICCMC 2019. Institute of Electrical and Electronics Engineers Inc., p. 828-832 5 p. 8819732. (Proceedings of the 3rd International Conference on Computing Methodologies and Communication, ICCMC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Design of microstrip patch antenna on flexible substrate for BAN applications

  Trisha, Kumar, P., Sriwas, S. K. & Kumar, M., 01-06-2019, In: International Journal of Engineering and Advanced Technology. 8, 5, p. 1657-1662 6 p.

  Research output: Contribution to journal › Article › peer-review

• Design of mobile application for assisting color blind people to identify information on sign boards

  Navada, B. R. & Venkata, S. K., 01-01-2017, In: Journal of Engineering and Technological Sciences. 49, 5, p. 671-688 18 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design of modified booth based multiplier with carry pre-computation

  Chaitanya, C. V. S., Sundaresan, C., Venkateswaran, P. R. & Prasad, K., 01-03-2019, In: Indonesian Journal of Electrical Engineering and Computer Science. 13, 3, p. 1048-1055 8 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Design of multifunctionalized piperazine polymer and its activity toward pathogenic microorganisms

  Jalageri, M. D., Malgar Puttaiahgowda, Y., Parambil, A. M. & Kulal, A., 15-05-2019, In: Journal of Applied Polymer Science. 136, 19, 47521.

  Research output: Contribution to journal › Article › peer-review
  15 Citations (Scopus)