Find Research outputs

Search results

• Article

  Experimental analysis of thermoelectric heat exchanger powered by solar energy

  Shetty, S. P., Abishek, K., Pramodh, K., Madhwesh, N. & Karanth, K. V., 15-01-2021, In: Energy Conversion and Management. 228, 113687.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Experimental analysis of the thermal properties of fused quartz-reinforced Al-6061alloy matrix composites using RSM approach

  Hiremath, A. & Bhat, R., 01-03-2020, In: Journal of Mechanical Science and Technology.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental Analysis of Viscoelastic Properties of Room Temperature Vulcanized Silicone based Magnetorheological Elastomer

  Bhaktha, S., Hegde, S. & Rao, S. U., 05-01-2022, In: Defence Science Journal. 72, 1, p. 98-104 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Experimental and Computational Investigation of Structural Integrity of Dissimilar Metal Weld Between Ferritic and Austenitic Steel

  Santosh, R., Das, G., Kumar, S., Singh, P. K. & Ghosh, M., 01-06-2018, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 49, 6, p. 2099-2112 14 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental and finite element investigations on the biomechanical effects of meniscal tears in the knee joint: A review

  Devaraj, A. K., Acharya, K. K. V. & Adhikari, R., 2021, In: Journal of Biomimetics, Biomaterials and Biomedical Engineering. 50, p. 1-14 14 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

  Kumar, S., Dinesha, P. & Sai Krishna, K. R. N., 03-04-2019, In: Journal of Turbulence. 20, 4, p. 245-262 18 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Experimental and numerical analysis of cylindrical turbulators in a double pipe heat exchanger under turbulent flow conditions

  Kumar, S., Dinesha, P. & Sai Krishna, K. R. N., 03-04-2019, In: Journal of Turbulence.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental and numerical investigation of the effects of passive vortex generators on Aludra UAV performance

  Zhen, T. K., Zubair, M. & Ahmad, K. A., 10-2011, In: Chinese Journal of Aeronautics. 24, 5, p. 577-583 7 p.

  Research output: Contribution to journal › Article › peer-review
  38 Citations (Scopus)

• Experimental and numerical studies of porous media combustion in micro burner

  Janvekar, A. A., Abdullah, M. Z., Ahmad, Z. A., Abas, A., Zuber, M., Ismail, A. K., Hussien, A., Kataraki, P., Mohamed, M., Bashir, M., Husin, A. & Fadzli, K., 01-03-2018, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 43, 1, p. 112-120 9 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Experimental and Numerical Study for Estimation and Reduction of The Blind Spot in A Passenger Car

  Thara, R. I. V., Zuber, M., Gupta, S., Agarwal, A., Hegde, S. & Chethan, K. N., 11-2021, In: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. 87, 2, p. 66-81 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Experimental and numerical study of stenotic flows

  Khader, S. M. A., Rajeev, R., Ayachit, A., Pai, R., Muraleedharan, C. V., Zubair, M. & Rao, V. R. K., 01-10-2016, In: Journal of Medical Imaging and Health Informatics. 6, 6, p. 1500-1506 7 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental and numerical thermal analysis of formula student racing car disc brake design

  Vidiya, M. & Singh, B., 01-01-2017, In: Journal of Engineering Science and Technology Review. 10, 1, p. 138-147 10 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Experimental and Theoretical Evaluation of Efficacy of Inhibitory Action of Benzyl Isothiocyanate

  Pais, M., Shwetha, N. & Rao, P., 05-2021, In: Protection of Metals and Physical Chemistry of Surfaces. 57, 3, p. 597-607 11 p.

  Research output: Contribution to journal › Article › peer-review

• Experimental and theoretical investigation of molecular interaction and molecular polarity of organic solvent with ionic liquids and deep eutectic solvents at T (298.15–343.15) K and 1 atm

  Ramalingam, A., Rajendran Startha Christabel, A., Vatti, A. K., Mark Reji, D. J. P. & Nagaraj, S., 01-01-2021, In: Asia-Pacific Journal of Chemical Engineering. 16, 1, e2545.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Experimental assessment of FSW process to join AA6061/Rutile composite and parametric optimization using TGRA

  Prabhu, S. R., Shettigar, A., Herbert, M. A. & Rao, S. S., 09-2021, In: Engineering Research Express. 3, 3, 035035.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental data of co-crystals of Etravirine and L-tartaric acid

  Rekdal, M., pai, A. & BS, M., 01-02-2018, In: Data in Brief. 16, p. 135-140 6 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Experimental data of fabricated co-crystals of doxorubicin HCl with flavonoids

  Laxmi, P., Varma, A., Pai, A. & Sathyanarayana, M. B., 01-07-2019, In: Indian Journal of Pharmaceutical Education and Research. 53, 3, p. S225-S230

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Experimental demonstration of the performance of the novel thermosyphon heat transport device and comparison with CFD predictions

  Varun, K., Arunachala, U. C. & Vijayan, P. K., 06-2022, In: International Journal of Thermal Sciences. 176, 107503.

  Research output: Contribution to journal › Article › peer-review

• EXPERIMENTAL EVALUATION OF ANALGESIC ACTIVITY OF AQUEOUS EXTRACT OF TERMINALIA PANICULATA BARK IN RATS

  Kamalkishore, M. K., Ommurugan, B., Singh, B. P. & Amberkar, M. V., 10-2021, In: Indian Drugs. 58, 10, p. 56-59 4 p.

  Research output: Contribution to journal › Article › peer-review

• Experimental evaluation of Pentas lanceolata flowers for wound healing activity in rats

  Nayak, B. S., Vinutha, B., Geetha, B. & Sudha, B., 01-12-2005, In: Fitoterapia. 76, 7-8, p. 671-675 5 p.

  Research output: Contribution to journal › Article › peer-review
  39 Citations (Scopus)

• Experimental evaluation of the coefficient of thermal expansion of chilled aluminum alloy-borosilicate glass (P) composite

  Hiremath, A. & Hemanth, J., 01-01-2017, In: Journal of Materials and Environmental Science. 8, 12, p. 4246-4252 7 p.

  Research output: Contribution to journal › Article › peer-review
  5 Citations (Scopus)

• Experimental investigation and ANFIS-Based modelling during machining of EN31 alloy steel

  Shivakoti, I., Rodrigues, L. L. R., Cep, R., Pradhan, P. M., Sharma, A. & Bhoi, A. K., 07-2020, In: Materials. 13, 14, 3137.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  2 Citations (Scopus)

• Experimental investigation and empirical modelling of thermal and drive current effect on optical performance of commercial LEDs

  Padmasali, A. N. & Kini, S. G., 2020, (Accepted/In press) In: Lighting Research and Technology.

  Research output: Contribution to journal › Article › peer-review

• Experimental Investigation and Neural network based parametric prediction in a multistage reciprocating humidifier

  Salins, S. S., Kota Reddy, S. V. & Shiva Kumar, K., 01-07-2021, In: Applied Energy. 293, 116958.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Experimental investigation and optimization of wall deflection and material removal rate in milling thin-wall parts

  Bolar, G. & Joshi, S. N., 2021, In: Manufacturing Review. 8, 2021015.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Experimental investigation of humidification parameters using biomass-based charcoal as an alternative packing material

  Suranjan Salins, S., Kota Reddy, S. V., Shiva Kumar, K. & Stephen, C., 2021, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Experimental investigation of mechanical sustainability and acoustic performance of fly ash cenosphere/epoxy polymer composites

  Hegde, S., Padmaraj, N. H., Siddesh, V., Sunaya, T. S., Adithya Kini, K. & Sanil, V. K., 2021, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Experimental investigation of SI engine characteristics using Acetone-Butanol-Ethanol (ABE) – Gasoline blends and optimization using Particle Swarm Optimization

  Dinesha, P., Mohan, S. & Kumar, S., 2021, (Accepted/In press) In: International Journal of Hydrogen Energy.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Experimental investigation of the effects of nanoparticles as an additive in diesel and biodiesel fuelled engines: a review

  Kumar, S., Dinesha, P. & Bran, I., 01-05-2019, In: Biofuels. p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review
  23 Citations (Scopus)

• Experimental investigation of the influence of vapor compression refrigeration in a multistage reciprocating dehumidifier test rig

  Salins, S. S., Reddy, S. V. K. & Kumar, S., 25-11-2021, In: Applied Thermal Engineering. 199, 117546.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental investigation of transient thermal comfort for the indoor vegetation

  Suranjan Salins, S., Shiva, K. & Reddy, S. V. K., 2021, (Accepted/In press) In: International Journal of Sustainable Energy.

  Research output: Contribution to journal › Article › peer-review

• Experimental investigation on dynamic and static transverse behaviour of thin woven Carbon/Aramid hybrid laminates

  Andrews Zachariah, S., Satish Shenoy, B., Jayan, J. & Pai, K. D., 2020, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  3 Citations (Scopus)

• Experimental investigation on fatigue behaviour of glass/epoxy quasi-isotropic laminate composites under different ageing conditions

  Padmaraj, N. H., Vijaya, K. M. & Dayananda, P., 02-2021, In: International Journal of Fatigue. 143, 105992.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Experimental investigation on influence of functionalized multi-walled carbon nanotubes on surface roughness in drilling of cfrp composites

  Suman, S., Alva, P. P., Daniel, N. G. & Shetty, N., 30-06-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 3, p. 1133-1146 14 p.

  Research output: Contribution to journal › Article › peer-review

• Experimental investigation on mechanical and wear properties of nanoclay-epoxy composites

  Shettar, M., Kowshik, C. S. S., Manjunath, M. & Hiremath, P., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 9108-9116 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  18 Citations (Scopus)

• Experimental investigation on silicon carbide reinforced Duralumin based mmc produced by cold compacting

  Gowri Shankar, M. C., Shivaprakash, Y. M., Siddesh Kumar, N. M., Siddhartha, M. A. & Dutta, A., 01-04-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 507-524 18 p., IJMPERDAPR201949.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Experimental investigation on solid particle erosion behaviour of glass/epoxy Quasi-isotropic laminates

  Padmaraj, N. H., Vijaya, K. M. & Dayananda, P., 12-06-2019, In: Materials Research Express. 6, 8, 085339.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Experimental investigation on strengthening of concrete by partial replacement of nano and micro silica

  Vinothini, K., Elangovan, R. & Vinoth, R., 01-07-2018, In: International Journal of Civil Engineering and Technology. 9, 7, p. 422-429 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Experimental investigation on tapping of Al6061/SiC metal matrix composite with 2 and 4 microns TiAlN coated straight fluted HSS machine taps

  Nagaraja, R. A., Sathish Rao, U. & Nambiar, S., 01-01-2019, In: Journal of Mechanical Engineering Research and Developments. 42, 4, p. 196-205 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Experimental investigation on the effect of carbon nanotube additive on the field-induced viscoelastic properties of magnetorheological elastomer

  Poojary, U. R., Hegde, S. & Gangadharan, K. V., 01-03-2018, In: Journal of Materials Science. 53, 6, p. 4229-4241 13 p.

  Research output: Contribution to journal › Article › peer-review
  22 Citations (Scopus)

• Experimental investigation on the effect of magnetic field on strain dependent dynamic stiffness of magnetorheological elastomer

  Poojary, U. R. & Gangadharan, K. V., 01-12-2016, In: Rheologica Acta. 55, 11-12, p. 993-1001 9 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Experimental investigation on the humidification parameters of the reciprocating multistage evaporative Cooler-A novel approach

  Kumar, S., Reddy, S. V. K. & Salins, S. S., 07-2022, In: International Journal of Thermal Sciences. 177, 107539.

  Research output: Contribution to journal › Article › peer-review

• Experimental investigation on the performance of helical milling for hole processing in AZ31 magnesium alloy

  Gonsalves, J. A., Nayak, S. N. & Bolar, G., 2020, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  6 Citations (Scopus)

• Experimental investigation on the performance parameters of a helical coil dehumidifier test rig

  Suranjan Salins, S., Anusha Siddiqui, S., Reddy, S. V. K. & Kumar, S., 2020, (Accepted/In press) In: Energy Sources, Part A: Recovery, Utilization and Environmental Effects.

  Research output: Contribution to journal › Article › peer-review
  7 Citations (Scopus)

• Experimental investigation on the tensile and flexural strength of nano-polymer composites

  Shettar, M., Kini, U. A., Sharma, S. & Hiremath, P., 01-09-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 5, p. 702-707 6 p.

  Research output: Contribution to journal › Article › peer-review

• Experimental investigation on use of alternative innovative materials for sustainable cooling applications

  Suranjan Salins, S., Reddy, S. V. K. & Kumar, S., 2021, (Accepted/In press) In: International Journal of Sustainable Engineering.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Experimental investigations and empirical relationship on the influence of innovative hub geometry in a centrifugal fan for performance augmentation

  Madhwesh, N., Vasudeva Karanth, K. & Yagnesh Sharma, N., 12-2021, In: International Journal of Mechanical and Materials Engineering. 16, 1, 5.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Experimental investigations of humidification parameters and transient analysis in a rotating centrifugal humidifier

  Suranjan Salins, S., Sreekumaran Nair, P., Kota Reddy, S. V. & Kumar, S., 09-2021, In: Journal of Building Engineering. 41, 102770.

  Research output: Contribution to journal › Article › peer-review

• Experimental investigations on a cross flow solar air heater having perforated circular absorber plate for thermal performance augmentation

  Shetty, S. P., Paineni, A., Kande, M., Madhwesh, N., Yagnesh Sharma, N. & Vasudeva Karanth, K., 02-2020, In: Solar Energy. 197, p. 254-265 12 p.

  Research output: Contribution to journal › Article › peer-review
  18 Citations (Scopus)

• Experimental investigations on performance characteristics in wire electro discharge machining of Ti₅₀Ni_42.4Cu_7.6 shape memory alloy

  Narendranath, S., Manjaiah, M., Basavarajappa, S. & Gaitonde, V. N., 01-08-2013, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 8, p. 1180-1187 8 p.

  Research output: Contribution to journal › Article › peer-review
  30 Citations (Scopus)