Find Research outputs

Search results

• Conference article

  Investigation for the improvement of film cooling effectiveness on a high pressure Turbine aerofoil with shaped film holes

  Suresh, B., Abhilash, P. S., Yagnesh Sharma, N., Kesavan, V. & Kishore Prasad, D., 01-01-2018, In: International Conference on Computational Methods for Thermal Problems. 223309, p. 860-864 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Film Cooling
  • Turbine
  • Airfoils
  • Turbines
  • Cooling

• Investigation of tensile properties of RTV Silicone based Isotropic Magnetorheological Elastomers.

  Sandesh, B., Sriharsha, H., Rao Sathish, U. & Nikhil, G., 09-01-2018, In: MATEC Web of Conferences. 144, 02015.

  Research output: Contribution to journal › Conference article › peer-review

  • Elastomers
  • Vulcanization
  • Silicones
  • Tensile properties
  • Temperature
  1 Citation (Scopus)

• Investigation on Influence of Geometry on Performance of a Cavity-less Pressure Sensor

  Mathias, K. A. & Kulkarni, S. M., 19-10-2018, In: IOP Conference Series: Materials Science and Engineering. 417, 1, 012035.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Pressure sensors
  • Geometry
  • Tires
  • Sensors
  • Automobiles
  3 Citations (Scopus)

• Investigation on microstructure and mechanical properties of Friction Stir Welded AA6061-4.5Cu-10SiC composite

  Herbert, M. A., Shettigar, A. K., Nigalye, A. V. & Rao, S. S., 03-03-2016, In: IOP Conference Series: Materials Science and Engineering. 114, 1, 012125.

  Research output: Contribution to journal › Conference article › peer-review

  • Friction
  • Microstructure
  • Mechanical properties
  • Composite materials
  • Metals
  6 Citations (Scopus)

• Knowledge Base Ontology Building for Fraud Detection Using Topic Modeling

  Attigeri, G., Manohara Pai, M. M., Pai, R. M. & Kulkarni, R., 01-01-2018, In: Procedia Computer Science. 135, p. 369-376 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Ontology
  • Analog to digital conversion
  • Industry
  • Experiments
  3 Citations (Scopus)

• Lithium-Ion Battery Management System: A Lifecycle Evaluation Model for the Use in the Development of Electric Vehicles

  Sisodia, A. & Monteiro, J., 09-01-2018, In: MATEC Web of Conferences. 144, 04020.

  Research output: Contribution to journal › Conference article › peer-review

  • Battery management systems
  • Lithium-ion batteries
  • Electric vehicles
  • Lithium
  • Life cycle
  2 Citations (Scopus)

• Machine-learning-based classification of Stokes-Mueller polarization images for tissue characterization

  Sindhoora, K. M., Spandana, K. U., Ivanov, D., Borisova, E., Raghavendra, U., Rai, S., Kabekkodu, S. P., Mahato, K. K. & Mazumder, N., 09-04-2021, In: Journal of Physics: Conference Series. 1859, 1, 012045.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • machine learning
  • characterization
  • polarization
  • calculi
  • circular polarization

• Matching before and after Surgery Faces

  Bansal, A. & Shetty, N. P., 01-01-2018, In: Procedia Computer Science. 132, p. 141-148 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Surgery
  • Biometrics
  • Face recognition
  • Seals
  • Interpolation
  2 Citations (Scopus)

• Material failure analysis and engine combustion instabilities of both air and non-air breathing engines

  Sharma, K., Aditya, A. & Srinivas, G., 01-01-2020, In: Materials Today: Proceedings. 27, p. 231-237 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Failure analysis
  • Engines
  • Air
  • Aircraft engines
  • Derailments
  1 Citation (Scopus)

• Measurement of global solar radiation data using raspberry Pi and its estimation using genetic algorithm

  Priya, S. S., Borkataky, A., Reddy, S. & Thirunavukkarasu, I., 26-02-2018, In: MATEC Web of Conferences. 153, 07004.

  Research output: Contribution to journal › Conference article › peer-review

  • Rubus
  • Solar radiation
  • Genetic algorithms
  • Solar energy
  • Artificial intelligence

• Mechanical characterization of precipitation hardened Al7075-grey cast iron powder reinforced metal matrix composites

  Hindi, J., Achuta, K. & Amar, M., 09-01-2018, In: MATEC Web of Conferences. 144, 02007.

  Research output: Contribution to journal › Conference article › peer-review

  • Iron powder
  • Cast iron
  • Metals
  • Hardness
  • Composite materials
  1 Citation (Scopus)

• Mechanical property evaluation of alkali-treated jute fiber reinforced bio-epoxy composite materials

  Shivamurthy, B., Naik, N., Thimappa, B. H. S. & Bhat, R., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2116-2120 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Jute fibers
  • Alkalies
  • Mechanical properties
  • Composite materials
  • Epoxy Resins
  1 Citation (Scopus)

• Metal oxide thin film for chemiresistive biosensing applications

  Anchan, B., Hegde, S., De, S. & Patil, A., 2019, In: Materials Today: Proceedings. 27, p. 440-442 3 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Oxide films
  • Zinc Oxide
  • Zinc oxide
  • Thin films
  • Metals

• Microstructure and positron behavior in FeCl3 doped PVA/PVP blend

  Ravindrachary, V., Bhajantri, R. F., Harisha, A., Ismayil & Ranganathaiah, C., 28-12-2009, In: Physica Status Solidi (C) Current Topics in Solid State Physics. 6, 11, p. 2438-2441 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • positrons
  • positron annihilation
  • life (durability)
  • microstructure
  • diffraction
  11 Citations (Scopus)

• MIT manipal at ImageCLef 2019 visual question answering in medical domain

  Thanki, A. & Makkithaya, K., 01-01-2019, In: CEUR Workshop Proceedings. 2380

  Research output: Contribution to journal › Conference article › peer-review

  • Deep learning

• Monitoring multivariate process using improved independent component analysis-generalized likelihood ratio strategy

  Ramakrishna Kini, K. & Madakyaru, M., 2020, In: IFAC-PapersOnLine. 53, 1, p. 392-397 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Independent component analysis
  • Fault detection
  • Monitoring
  • Process monitoring
  • Automation
  1 Citation (Scopus)

• Multi-area Economic Dispatch Using Improved Particle Swarm Optimization

  Jadoun, V. K., Gupta, N., Niazi, K. R., Swarnkar, A. & Bansal, R. C., 01-01-2015, In: Energy Procedia. 75, p. 1087-1092 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Particle swarm optimization (PSO)
  • Economics
  • Interchanges
  • Power generation
  • Hot Temperature
  12 Citations (Scopus)

• Multiple regression analysis to predict the value of a residential building and to compare with the conventional method values

  Shetty, D. V., Rao, B. P., Prakash, C. & Vaibhava, S., 22-12-2020, In: Journal of Physics: Conference Series. 1706, 1, 012118.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • regression analysis
  • income
  • India
  • arts
  • composite materials

• Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

  Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2039-2046 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Carbides
  • Polymers
  • Drilling
  3 Citations (Scopus)

• Multi Response Optimization of Friction Stir Welding Process Variables using TOPSIS approach

  Prabhu, S. R., Shettigar, A., Herbert, M. & Rao, S., 27-06-2018, In: IOP Conference Series: Materials Science and Engineering. 376, 1, 012134.

  Research output: Contribution to journal › Conference article › peer-review

  • Friction stir welding
  • silicon carbide
  • Welds
  • Hardness
  • Composite materials
  2 Citations (Scopus)

• Multi-response optimization of process parameters in AWJ machining of hybrid GFRP composite by grey relational method

  Deepak, D. & Paulo Davim, J., 01-01-2019, In: Procedia Manufacturing. 35, p. 1211-1221 11 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Machining
  • Composite materials
  • Analysis of variance (ANOVA)
  • Graphite
  • Delamination
  5 Citations (Scopus)

• Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

  Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In: Materials Today: Proceedings. 19, p. 333-338 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Polyesters
  • Glass fibers
  • Drilling
  • Surface roughness
  6 Citations (Scopus)

• Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach

  Bhat, R., Mohan, N., Sharma, S., Kini, A. U., Shivakumar, S. & Naik, N., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2077-2083 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Marine applications
  • fiberglass
  • Machining
  • Glass fibers
  • Composite materials
  3 Citations (Scopus)

• New Reverse converters for the four-moduli set {2 ⁿ ,2 ⁿ -1,2 ⁿ +1,2 ^n-1 -1} for n even

  Phalguna, P. S., Kamat, D. V. & Mohan, P. V. A., 01-01-2019, In: Midwest Symposium on Circuits and Systems. 2019-January, p. 416-419 4 p., 8623892.

  Research output: Contribution to journal › Conference article › peer-review

  • Application specific integrated circuits
  • Field programmable gate arrays (FPGA)
  • Computer hardware

• N-Gram Assisted Youtube Spam Comment Detection

  Aiyar, S. & Shetty, N. P., 01-01-2018, In: Procedia Computer Science. 132, p. 174-182 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Machine learning
  • Marketing
  • Websites
  • Learning algorithms
  • Support vector machines
  9 Citations (Scopus)

• Nitk Kids' speech corpus

  Ramteke, P. B., Supanekar, S., Hegde, P., Nelson, H., Aithal, V. & Koolagudi, S. G., 01-01-2019, In: Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH. 2019-September, p. 331-335 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Corpus
  • Speech
  • Children
  • Data Base
  • Language Acquisition
  3 Citations (Scopus)

• Novel VTEO based Mel cepstral features for classification of normal and pathological voices

  Patil, H. A. & Baljekar, P. N., 01-12-2011, In: Proceedings of the Annual Conference of the International Speech Communication Association, INTERSPEECH. p. 509-512 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Voice
  • Error Rate
  • Fusion
  • Data Base
  • Operator
  2 Citations (Scopus)

• Numerical Analysis of Heat transfer Enhancement in a double pipe heat exchanger with a holed twisted tape

  Kumar, A., Sureka, U. & Kumar, S., 09-01-2018, In: MATEC Web of Conferences. 144, 04012.

  Research output: Contribution to journal › Conference article › peer-review

  • Tapes
  • Heat exchangers
  • Numerical analysis
  • Pipe
  • Heat transfer
  1 Citation (Scopus)

• Numerical and experimental investigations on two-phase flow of liquid nitrogen in a flexible transfer line

  Nagendra, H. N., Karthik, A. V., Verma, R., Kasthurirengan, S., Shivaprakash, N. C., Sahu, A. K. & Behera, U., 03-06-2019, In: IOP Conference Series: Materials Science and Engineering. 502, 1, 012198.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Liquid nitrogen
  • Two phase flow
  • Flow of fluids
  • Heat transfer
  • Void fraction

• On filtering short-duration sinusoids, periodic signals and damped sinusoids

  Galigekere, R. R., Venkatesh, Y. V. & Holdsworth, D. W., 01-12-1999, In: Canadian Conference on Electrical and Computer Engineering. 2, p. 702-707 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Adaptive filtering
  • Matched filters
  • Adaptive filters
  • Damping

• On perspective maximum intensity projection of CRA data

  Galigekere, R. R. & Holdsworth, D. W., 01-01-2002, In: Proceedings of SPIE - The International Society for Optical Engineering. 4681, p. 688-699 12 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Angiography
  • angiography
  • Voxel
  • projection
  • Imaging System
  2 Citations (Scopus)

• On some intrinsic properties of the radon transform of an SRF with application to 2-D spectrum estimation

  Galigekere, R. R. & Plotkin, E. I., 01-12-1995, In: Canadian Conference on Electrical and Computer Engineering. 2, p. 882-885 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Radon
  • Autocorrelation
  • Power spectrum
  • Statistics

• Optimization based feasibility analysis for Energy Conservation Building Code compliance of opaque wall assemblies in different climatic zones of India

  Kishore, P., Kini, P. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 221-228 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Compliance
  • Energy conservation
  • Energy utilization
  • Codes (standards)
  • Hot Temperature
  1 Citation (Scopus)

• Optimization based feasibility study for filler slabs as a response towards the ECBC roof compliance with respect to thermal transmittance for five climatic zones of India

  Acharya, R. R., Kishore, P., Raghuprem, M., Kini, P., Shetty, S. & Raj, A., 2020, In: Procedia Manufacturing. 44, p. 213-220 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Roofs
  • Fillers
  • Compliance
  • Energy conservation
  • Hot Temperature

• Optimization of TIG welding parameters for 6061Al alloy using Taguchi's design of experiments

  Jayashree, P. K., Sharma, S. S., Shetty, R., Mahato, A. & Gowrishankar, M. C., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 23648-23655 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Inert gas welding
  • Tungsten
  • Design of experiments
  • Welding
  • Welds
  5 Citations (Scopus)

• Parametric analysis for varying packing materials & water temperatures in a humidifier

  Salins, S. S., Siddiqui, S. A., Reddy, S. V. K. & Kumar, S., 2020, In: International Conference on Fluid Flow, Heat and Mass Transfer. p. 196-1-196-11

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Cooling
  • Water
  • Coefficient of performance
  • Temperature
  • Evaporation
  3 Citations (Scopus)

• Passenger data analysis of Titanic using machine learning approach in the context of chances of surviving the disaster

  Haque, M. A., Shivaprasad, G. & Guruprasad, G., 16-02-2021, In: IOP Conference Series: Materials Science and Engineering. 1065, 1, 012042.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Disasters
  • Machine learning
  • Decision trees
  • Labels
  • Learning algorithms

• Performance, cost and environmental assessment of gasification-based electricity in India: A preliminary analysis

  Rani, A., Singh, U., Jayant, Singh, A. K. & Mahapatra, S. S., 24-07-2017, In: IOP Conference Series: Earth and Environmental Science. 76, 1, 012007.

  Research output: Contribution to journal › Conference article › peer-review

  • performance assessment
  • environmental assessment
  • gasification
  • electricity
  • coal gasification
  1 Citation (Scopus)

• Performance Analysis of Antennas in Structural Health Monitoring

  Kumar, P., 12-11-2019, In: IOP Conference Series: Materials Science and Engineering. 561, 1, 012115.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Structural health monitoring
  • Dipole antennas
  • Concretes
  • Antennas
  • Microstrip antennas

• Physicochemical Analysis of Herbo-Mineral Medicine

  Kannan, N., Balaji, S. & Anil Kumar, N. V., 01-01-2018, In: Materials Today: Proceedings. 5, 10, p. 22405-22411 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Minerals
  • Medicine
  • Iron
  • X ray spectrophotometers
  • Infrared spectrometers

• Playing Action Video Games a Key to Cognitive Enhancement

  Chandra, S., Sharma, G., Salam, A. A., Jha, D. & Mittal, A. P., 01-01-2016, In: Procedia Computer Science. 84, p. 115-122 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Decomposition
  • Discriminant analysis
  • Electroencephalography
  • Classifiers
  10 Citations (Scopus)

• Polymer assisted preparation and characterization of ZnO and Sn doped ZnO nanostructures

  Kumar, A. S., Nagaraja, K. K. & Nagaraja, H. S., 01-01-2015, In: IOP Conference Series: Materials Science and Engineering. 73, 1, 012077.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Zinc Oxide
  • Zinc oxide
  • Nanostructures
  • Polymers
  • Characterization (materials science)
  5 Citations (Scopus)

• Positron annihilation studies on chalcone chromophore doped PVA

  Bhajantri, R. F., Ravindrachary, V., Harisha, A., Ismayil & Ranganathaiah, C., 28-12-2009, In: Physica Status Solidi (C) Current Topics in Solid State Physics. 6, 11, p. 2429-2431 3 p.

  Research output: Contribution to journal › Conference article › peer-review

  • chromophores
  • positron annihilation
  • charge transfer
  • life (durability)
  • optical materials
  9 Citations (Scopus)

• Power loss analysis in altered tooth-sum spur gearing

  Sachidananda, H. K., Raghunandana, K. & Shivamurthy, B., 09-01-2018, In: MATEC Web of Conferences. 144, 01015.

  Research output: Contribution to journal › Conference article › peer-review

  • Gear teeth
  • Gears
  • Lubricants
  • Air
  • Energy dissipation

• PRBS based model identification and GPC PID control design for MIMO Process

  Yadav, E. S. & Indiran, T., 01-01-2019, In: Materials Today: Proceedings. 17, p. 16-25 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Binary sequences
  • Three term control systems
  • Identification (control systems)
  • Dynamical systems
  • Uncertainty
  2 Citations (Scopus)

• Predictive control algorithm based on integral action- Design and implementation on a conical tank system

  Shreesha, C., Bhat, V. S., Thirunavukkarasu, I. & Priya, S. S., 26-02-2018, In: MATEC Web of Conferences. 153, 06010.

  Research output: Contribution to journal › Conference article › peer-review

  • Level control
  • Model predictive control
  • Nonlinear systems
  • MATLAB
  • Actuators
  1 Citation (Scopus)

• Private cloud solution for Securing and Managing Patient Data in Rural Healthcare System

  Ganiga, R., Pai, R. M., Pai, M. & Sinha, R. K., 01-01-2018, In: Procedia Computer Science. 135, p. 688-699 12 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Clouds
  • Health
  • Analog to digital conversion
  • Developing countries
  • Cloud computing
  6 Citations (Scopus)

• Production and Mechanical Testing of Aluminium Alloy Based Hybrid Metal Matrix Composite

  Gowrishankar, M. C., Shivaprakash, Y. M., Kumar, D., Prafful, A. J. S. & Prasad, Y., 2018, In: Materials Today: Proceedings. 5, 11, p. 23872-23880 9 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Graphite
  • Mechanical testing
  • Aluminum alloys
  • Metals
  • Composite materials

• Property Enhancement during Artificial Aging of Al6061- Silicon Oxide Metal Matrix Composites

  Prakash, Y. M. S., Shankar, M. C. G., Karthik, Sharma, S. S. & Kini, A., 01-01-2018, In: Materials Today: Proceedings. 5, 11, p. 24186-24193 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Silicon oxides
  • Metals
  • Aging of materials
  • Hardness
  • Composite materials
  3 Citations (Scopus)

• Quad band operated microstrip patch antenna for WiMAX application

  Sundaran, A., Joshi, S., Nidadavolu, A., Vincent, S., Kumar, O. P. & Ali, T., 22-12-2020, In: Journal of Physics: Conference Series. 1706, 1, 012108.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • patch antennas
  • microstrip antennas
  • antennas
  • interoperability
  • monopole antennas