Find Research Outputs

Search results

• Article

  Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

  Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tensile strength
  • Aging of materials
  • Composite materials
  • Hardness
  • Metals

• Influence of solutionising and aging treatments on mechanical behavior of Stir-Cast eutectoid steel powder reinforced Al 7075 metal matrix composites

  Rajesh, Sharma, S. & Gowrishankar, M. C., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5583-5591 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Carbon steel
  • Powders
  • Aging of materials
  • Composite materials
  • Tensile strength
  5 Citations (Scopus)

• Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

  Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In: Materials Research Express. 6, 1, 016508.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Age hardening
  • Powders
  • Carbon steel
  • Metals
  1 Citation (Scopus)

• Investigation and optimization of thermal shock effects on the properties and microstructure of Nanoclay-Glass Fiber Reinforced Epoxy Composites

  Shettar, M., Achutha Kini, U., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 11-09-2019, In: Materials Research Express. 6, 10, 105360.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Thermal shock
  • Glass fibers
  • Microstructure
  • Composite materials
  1 Citation (Scopus)

• Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

  Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In: Materials Research Express. 6, 1, 015206.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Glass fibers
  • Polymers
  • Bending strength
  • Tensile strength
  7 Citations (Scopus)

• Machinability and related properties of austempered ductile iron: A review

  Hegde, A., Sharma, S. & Gowri Shankar, M. C., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4180-4190 11 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Wear resistance
  • Mechanical properties
  • Graphite
  2 Citations (Scopus)

• Machinability study of manganese alloyed austempered ductile iron

  Hegde, A. & Sharma, S., 01-07-2018, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 40, 7, 338.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Machinability
  • Manganese
  • Surface roughness
  • Machining

• Mechanical characteristics evaluation of dual phase and related hardening techniques on AISI 4340 steel

  Gurumurthy, B. M., Sharma, S., Achutha Kini, U., Hegde, A. & Patil, A., 01-12-2018, In: Journal of Mechanical Engineering and Sciences. 12, p. 4018-4029 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Ferrite
  • Steel
  • Bainite
  • Martensite
  5 Citations (Scopus)

• Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

  Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In: International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Martensite
  • Ferrite
  • Toughness
  • Tensile strength

• Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

  Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Nodular iron
  • Manganese
  • Characterization (materials science)
  • Heat treatment
  • Hardness
  1 Citation (Scopus)

• Mechanical characterization of deformed and heat treated copper-eutectoid steel powder reinforced composites

  Gowri Shankar, M. C., Sharma, S., Karthik, B. M., Pinjar, A. D., Jose, N. & Shriyan, H. C., 01-01-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 289-302 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Powders
  • Copper
  • Carbon steel
  • Reinforcement
  • Composite materials

• Mechanical characterization of dual phase and austempered aisi 1040 normalized steel

  Gurumurthy, B. M., Shivaprakash, Y. M., Sharma, S., Achutha Kini, U. & Mathur, R., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 247-258 12 p., IJMPERDAPR202022.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Carbon steel
  • Mechanical properties
  • Dual phase steel
  • Bainite

• Mechanical characterization of heat treated Al2219 hybrid composites

  Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In: Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Characterization (materials science)
  • Composite materials
  • Hot Temperature
  • Impact resistance
  • Tensile strength

• Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

  Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In: Materials Research Express. 6, 8, 0865G8.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Heat treatment
  • Mechanical properties
  • Machinability
  • Annealing

• Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

  Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In: Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Polyesters
  • Mechanical testing
  • Glass fibers
  • Laminates
  10 Citations (Scopus)

• Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

  Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

  Research output: Contribution to journal › Article › peer-review

  • microstructure
  • Microstructure
  • rupture
  • Composite materials
  • mechanical property
  3 Citations (Scopus)

• Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels

  Gurumurthy, B. M., Gowrishankar, M. C., Sharma, S., Kini, A., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Duplex stainless steel
  • Alloy steel
  • Martensite
  • Carbon
  • Authentication
  1 Citation (Scopus)

• Multi-response optimization of the turn-assisted deep cold rolling process parameters for enhanced surface characteristics and residual stress of AISI 4140 steel shafts

  Prabhu, P. R., Kulkarni, S. M. & Sharma, S., 2020, In: Journal of Materials Research and Technology. 9, 5, p. 11402-11423 22 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Cold rolling
  • Steel
  • Residual stresses
  • Fatigue of materials
  • Surface hardening

• Potentiality of artificially aged aluminium 6061 hybrid composites reinforced with granite and graphite micro–fillers for structural applications: Potenzial von künstlich gealterten, mit Granit und Graphit verstärkten Aluminium- (6061) Hybrid-Verbundwerkstoffen für konstruktive Anwendungen

  Sharma, S. S., Pai, A. & Gowrishankar, M. C., 01-12-2017, In: Materialwissenschaft und Werkstofftechnik. 48, 11, p. 1082-1092 11 p.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Aluminum

• Precipitation hardening effect on the aging characteristics of two step stir cast Al7075-GCI_p composites

  Hindi, J., Achutha Kini, U. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 670-676 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Cast iron
  • Aging of materials
  • Hardness
  • Composite materials
  1 Citation (Scopus)

• Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

  Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

  Research output: Contribution to journal › Article › peer-review

  • fiberglass
  • Predictive analytics
  • Polyesters
  • Delamination
  • Glass fibers
  2 Citations (Scopus)

• Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

  Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In: International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Powders
  • Aging of materials
  • Hardness
  • Reinforcement

• Production, testing and microstructural investigation on fly ash reinforced aluminium alloy matrix composite

  Shivaprakash, Y. M., Gurumurthy, B. M., Sharma, S. S., Jayashree, P. K. & Gowrishankar, M. C., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 20, p. 41583-41590 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Fly ash
  • Aluminum alloys
  • Composite materials
  • Testing
  • Precipitates
  1 Citation (Scopus)

• Quality enhancement of TIG Welded Al6061 SiCp composites by age hardening process

  Shankar, M. C. G., Jayashree, P. K., Sharma, S. S., Shetty, R. & Vinay, K., 01-01-2018, In: International Journal of Automotive and Mechanical Engineering. 15, 3, p. 5573-5582 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Inert gases
  • Tungsten
  • Welds
  • Tensile strength
  3 Citations (Scopus)

• Quench hardening and mechanical characterization of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Shetty, A., 01-04-2018, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 2, p. 589-594 6 p., IJMPERDAPR201958.

  Research output: Contribution to journal › Article › peer-review

  • Castor Oil
  • Steel
  • Hardening
  • Ice
  • Oils

• Sliding Wear Behaviour of Nickel-Coated Short Fibre-Reinforced Al7075 Composites

  Kumar, N., Kiran, M. D., Sharma, S. S., Ravikiran Kamath, B. & Veeresha, R. K., 01-10-2020, In: Journal of Failure Analysis and Prevention.

  Research output: Contribution to journal › Article › peer-review

  • Carbon Fiber
  • Nickel
  • Carbon fibers
  • Wear of materials
  • Fibers

• Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

  Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

  Research output: Contribution to journal › Article › peer-review

  • Clay
  • Nanocomposites
  • Microhardness
  • Sonication
  • Wear resistance

• Study of cycle time reduction and assembly process improvement for various electric stackers

  Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

  Research output: Contribution to journal › Article › peer-review

  • Standardization
  • Materials handling
  • Welding
  • Pipe fittings
  • Hydraulic actuators

• Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Heat treatment
  • Hardness
  • Mechanical properties
  • Wear resistance
  2 Citations (Scopus)

• Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review

  • composite materials
  • hardness
  • precipitates
  • iron
  • boron carbides
  3 Citations (Scopus)

• Study on chip-morphology in turning of Ti-6Al-4V alloy under high pressure neat oil and soluble oil

  Gowri Shankar, A., Shiva Prakash, B., Jayashree, C. & Sharma, S. S., 01-01-2013, In: International Journal of Earth Sciences and Engineering. 6, 4, p. 832-837 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Machining
  • cooling
  • Cooling
  • Oils
  • oil
  1 Citation (Scopus)

• Study on dual-phase structure of AISI4140 steel

  Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In: Indian Journal of Science and Technology. 9, 33, 93526.

  Research output: Contribution to journal › Article › peer-review

  • steels
  • normalizing
  • pretreatment
  • impact resistance
  • bainite
  2 Citations (Scopus)

• Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymers
  • Polyesters
  • Tensile strength
  • Hardness
  • Resins
  14 Citations (Scopus)

• Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

  Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In: International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Tensile strength
  • Aging of materials
  • Dispersion hardening
  • Cold working
  1 Citation (Scopus)

• Study on the mechanical properties of nanoclay-epoxy composites under different hygrothermal aging conditions

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 07-06-2019, In: Materials Research Express. 6, 8, 085333.

  Research output: Contribution to journal › Article › peer-review

  • ASTM standards
  • Aging of materials
  • Water
  • Mechanical properties
  • Composite materials
  6 Citations (Scopus)

• Surface Properties and Corrosion Behavior of Turn-Assisted Deep-Cold-Rolled AISI 4140 Steel

  Prabhu, P. R., Prabhu, D., Sharma, S. & Kulkarni, S. M., 01-09-2020, In: Journal of Materials Engineering and Performance.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Steel
  • Surface properties
  • Corrosion
  • Corrosion rate
  • Residual stresses

• Surface roughness analysis in the drilling of carbon fiber/epoxy composite laminates using hybrid Taguchi-Response experimental design

  Shahabaz, S. M., Shetty, N., Shetty, S. D. & Sharma, S. S., 01-01-2019, In: Materials Research Express. 7, 1, 015322.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon Fiber
  • Carbon fibers
  • Design of experiments
  • Laminates
  • Drilling
  1 Citation (Scopus)

• Tensile fractography of artificially aged Al6061-B4C composites

  Sharma, S., Kini, A., Shankar, G., Rakesh, T. C., Raja, H., Chaitanya, K. & Shettar, M., 01-09-2018, In: Journal of Mechanical Engineering and Sciences. 12, 3, p. 3866-3875 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Fractography
  • Aging of materials
  • Composite materials
  • Hardness
  • Reinforcement
  11 Citations (Scopus)

• The hardness behaviour of TIG welded al6061 alloy using statistical tool

  Jayashree, P. K., Raviraj, S., Sharma, S. S. & Shankar, G., 01-06-2018, In: Iranian Journal of Materials Science and Engineering. 15, 2, p. 88-96 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Aging of materials
  • Hardness
  • Noble Gases
  • Tungsten
  • Age hardening

• Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

  Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Cold rolling
  • Fatigue of materials
  • Shot peening
  • Steel
  • Burnishing
  2 Citations (Scopus)

• Wear related study on the precipitation hardened al7075-grey cast iron particulate reinforced composites

  Achutha Kini, U., Hindi, J. & Sharma, S. S., 01-01-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 703-708 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Cast iron
  • Reinforcement
  • Wear of materials
  • Composite materials
  • Wear resistance