Find Research Outputs

Search results

• Analysis on magnetocaloric and structural properties of heusler alloys used in magnetic refrigeration

  Sandeep Nambiar, S., Murthy, B. R. N., Sharma, S. & Prasanna, A. A., 08-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 4, p. 29-46 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Magnetic refrigeration
  • Structural properties
  • Martensitic transformations
  • Temperature
  • Refrigerants

• A review on finite element method for machining of composite materials

  Shetty, N., Shahabaz, S. M., Sharma, S. S. & Divakara Shetty, S., 15-09-2017, In: Composite Structures. 176, p. 790-802 13 p.

  Research output: Contribution to journal › Review article › peer-review

  • Drilling
  • Machining
  • Finite element method
  • Composite materials
  • Delamination
  42 Citations (Scopus)

• Characteristic study and comparison of different hardening methods on low-alloy medium-carbon spring steel

  Mehta, D. B., Sharma, S. S., Gurumurthy, B. M., Kishan Bairy, S., Dsouza, E. J. & Mendonca, A. P., 01-03-2016, In: International Journal of Applied Engineering Research. 11, 2, p. 1542-1547 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Hardening
  • Carbon
  • Steel
  • Heat treatment
  • Phase composition

• Coated and uncoated reinforcements metal matrix composites characteristics and applications–A critical review

  B M, K., M C, G., Sharma, S., Hiremath, P., Shettar, M. & Shetty, N., 2020, In: Cogent Engineering. 7, 1, 1856758.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Metals
  • Reinforcement
  • Composite materials
  • Nickel
  • Copper

• Effect of artificial aging on fracture behavior of Al6061-Silica (SiO₂) composites

  Jagannath, K., Sharma, S. S., Prabhu, P. R., Gowri Shankar, S. M. C. & Harisha, S. R., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 59-62 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Silicon Dioxide
  • Silica
  • Aging of materials
  • silicon dioxide
  • composite materials
  1 Citation (Scopus)

• Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites

  Pai, A., Sharma, S. S., D'Silva, R. E. & Nikhil, R. G., 17-08-2015, In: Tribology International. 92, p. 462-471 10 p., 3770.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Dust
  28 Citations (Scopus)

• Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

  Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

  Research output: Contribution to journal › Article › peer-review

  • Thioureas
  • Thiourea
  • Corrosion inhibitors
  • Steel
  • Heat treatment

• Effect of homogenizing and age hardening on mechanical property enhancement of TIG welded Al6061 SIC_p composites

  Jayashree, P. K., Sharma, S. S. & Shetty, R., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 89-93 5 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Noble Gases
  • Tungsten
  • Age hardening
  • Inert gases
  • precipitation hardening

• Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels- A numerical analysis

  Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Gurumurthy, B. M., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8439-8450 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carburizing
  • Steel
  • Alloy steel
  • Carbon steel
  • Numerical analysis

• Effect of SiC particulate reinforcement on the precipitation hardening behavior of two step stir cast Al 6061 alloy

  Gowri Shankar, M. C., Achutha Kini, U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 18-24 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Reinforcement
  • Aging of materials
  • Precipitates
  • Composite materials
  2 Citations (Scopus)

• Experimental validity on the casting characteristics of stir cast aluminium composites

  Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Aluminum
  • Casting
  • Composite materials
  • Reinforcement
  • Aluminum alloys
  5 Citations (Scopus)

• Ferrite-martensite dual phase treatment of AISI 1040 steel and mechanical characterization

  Gurumurthy, B. M., Sharma, S. S. & Kini, A. U., 01-01-2017, Advanced Materials and Engineering Materials VI - 6th ICAMEM. Trans Tech Publications Ltd, p. 280-283 4 p. (Key Engineering Materials; vol. 748 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Ferrite
  • Tempering
  • Impact resistance
  2 Citations (Scopus)

• FRP-Nanoclay hybrid composites: A review

  Shettar, M., Kini, A., Sharma, S. & Hiremath, P., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 146-150 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • mechanical properties
  • Mechanical properties
  • Composite materials
  • Nanocomposites
  10 Citations (Scopus)

• Hygrothermal chamber aging effect on mechanical behavior and morphology of glass fiber-epoxy-nanoclay composites

  Shettar, M., Kini, U. A., Sharma, S., Hiremath, P. & Gowrishankar, G. C. G., 01-01-2020, In: Materials Research Express. 7, 1, 015318.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • fiberglass
  • Glass fibers
  • Aging of materials
  • Composite materials
  • Casting
  2 Citations (Scopus)

• Influence of aging temperature and aging time on the mechanical property and microstructure during precipitation hardening of Al 6061 alloy

  Gowri, S. M. C., Achutha, K. U., Sharma, S. S. & Prabhu, P. R., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 25-31 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Age hardening
  • Aging of materials
  • Electron microscopes
  • Microstructure
  • Mechanical properties
  3 Citations (Scopus)

• Influence of artificial aging on the stir cast Al6061-SiC metal matrix composites under different aging conditions

  Shankar, G., Sharma, S. S., Kini, A., Praksh, S. & Gurumurthy, 01-01-2016, In: International Journal of Technology. 7, 6, p. 1000-1008 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Wear Resistance
  • Matrix
  • Metals
  • Aging of materials
  • Hardness
  6 Citations (Scopus)

• Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

  Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Tensile strength
  • Aging of materials
  • Composite materials
  • Hardness
  • Metals

• Influence of spheroidizing heat treatment on mechanical properties of EN47 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 136-139 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Steel
  • Heat treatment
  • heat treatment
  • Hardness
  • Tempering
  5 Citations (Scopus)

• Investigation on effect of nano-fillers on mechanical properties of epoxy based composites using ANOVA

  Shettar, M., Hiremath, P., Kini, A. & Sharma, S., 01-01-2017, Metallurgy Technology and Materials V - 5th ICMTM. Trans Tech Publications Ltd, p. 137-141 5 p. (Materials Science Forum; vol. 904 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Analysis of variance (ANOVA)
  • fillers
  • Fillers
  • mechanical properties
  • Mechanical properties
  3 Citations (Scopus)

• Mechanical characterization of dual phase and austempered aisi 1040 normalized steel

  Gurumurthy, B. M., Shivaprakash, Y. M., Sharma, S., Achutha Kini, U. & Mathur, R., 01-01-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 247-258 12 p., IJMPERDAPR202022.

  Research output: Contribution to journal › Article › peer-review

  • Steel
  • Carbon steel
  • Mechanical properties
  • Dual phase steel
  • Bainite

• Mechanical property association of dual phase and austempered aisi 4140 normalized steel

  Sharma, S., Gurumurthy, B. M., Achutha Kini, U., Gowrishankar, M. C. & Shivaprakash, Y. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 174-179 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Martensite
  • Steel
  • Impact strength
  • Ferrite
  • Tensile strength

• Metallography & bulk hardness of artificially aged Al6061-B₄C-SiC stir cast hybrid composites

  Sharma, S. S., Jagannath, K., Prabhu, P. R., Gowri, S., Harisha, S. R. & Kini, A., 01-01-2017, 4th Asia Conference on Mechanical and Materials Engineering. Trans Tech Publications Ltd, p. 140-143 4 p. (Materials Science Forum; vol. 880).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • hybrid composites
  • Metallography
  • metallography
  • casts
  • Hardness
  4 Citations (Scopus)

• Microstructure and fracture behaviour of two stage stir cast Al6061-SiC composites

  Gowri Shankar, M. C., Sharma, S. S., Achutha Kini, U., Hiremath, P. & Gurumurthy, 01-01-2017, In: Journal of Materials and Environmental Science. 8, 1, p. 257-263 7 p.

  Research output: Contribution to journal › Article › peer-review

  • microstructure
  • Microstructure
  • rupture
  • Composite materials
  • mechanical property
  3 Citations (Scopus)

• Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels

  Gurumurthy, B. M., Gowrishankar, M. C., Sharma, S., Kini, A., Shettar, M. & Hiremath, P., 01-01-2020, In: Journal of Materials Research and Technology.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Duplex stainless steel
  • Alloy steel
  • Martensite
  • Carbon
  • Authentication
  1 Citation (Scopus)

• Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

  Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2039-2046 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • fiberglass
  • Glass fibers
  • Carbides
  • Polymers
  • Drilling
  1 Citation (Scopus)

• Multi-response optimization of the turn-assisted deep cold rolling process parameters for enhanced surface characteristics and residual stress of AISI 4140 steel shafts

  Prabhu, P. R., Kulkarni, S. M. & Sharma, S., 2020, In: Journal of Materials Research and Technology. 9, 5, p. 11402-11423 22 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Cold rolling
  • Steel
  • Residual stresses
  • Fatigue of materials
  • Surface hardening

• Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach

  Bhat, R., Mohan, N., Sharma, S., Kini, A. U., Shivakumar, S. & Naik, N., 01-01-2020, In: Materials Today: Proceedings. 28, p. 2077-2083 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Marine applications
  • fiberglass
  • Machining
  • Glass fibers
  • Composite materials
  2 Citations (Scopus)

• Post solutionising rolling sway on the precipitation behaviour of eutectoid steel powder reinforced al7075 ternary alloy composites

  Rajesh, Sharma, S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 9-14 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Ternary alloys
  • ternary alloys
  • Powders
  • Carbon steel
  • Aging of materials

• Potentiality of artificially aged aluminium 6061 hybrid composites reinforced with granite and graphite micro–fillers for structural applications: Potenzial von künstlich gealterten, mit Granit und Graphit verstärkten Aluminium- (6061) Hybrid-Verbundwerkstoffen für konstruktive Anwendungen

  Sharma, S. S., Pai, A. & Gowrishankar, M. C., 01-12-2017, In: Materialwissenschaft und Werkstofftechnik. 48, 11, p. 1082-1092 11 p.

  Research output: Contribution to journal › Article › peer-review

  • granite
  • hybrid composites
  • Graphite
  • Granite
  • Aluminum

• Process optimization on hardness of precipitation hardened Al6061 alloy using design of experiments

  Shankar, G., Achutha Kini, U. & Sharma, S. S., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 27-32 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • experiment design
  • Design of experiments
  • Age hardening
  • Aging of materials
  • Hardness

• Production, testing and microstructural investigation on fly ash reinforced aluminium alloy matrix composite

  Shivaprakash, Y. M., Gurumurthy, B. M., Sharma, S. S., Jayashree, P. K. & Gowrishankar, M. C., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 20, p. 41583-41590 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Fly ash
  • Aluminum alloys
  • Composite materials
  • Testing
  • Precipitates
  1 Citation (Scopus)

• Sliding Wear Behaviour of Nickel-Coated Short Fibre-Reinforced Al7075 Composites

  Kumar, N., Kiran, M. D., Sharma, S. S., Ravikiran Kamath, B. & Veeresha, R. K., 01-10-2020, In: Journal of Failure Analysis and Prevention.

  Research output: Contribution to journal › Article › peer-review

  • Carbon Fiber
  • Nickel
  • Carbon fibers
  • Wear of materials
  • Fibers

• Spheroidize annealing and mechanical property evaluation of AISI 1040 steel

  Harisha, S. R., Sharma, S. S. & Kini, A., 01-01-2017, 5th Asia Conference on Mechanical and Materials Engineering - 5th ACMME 2017. Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 909 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • carbon steels
  • Steel
  • Annealing
  • Carbon steel
  • steels
  1 Citation (Scopus)

• Study of cycle time reduction and assembly process improvement for various electric stackers

  Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In: International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

  Research output: Contribution to journal › Article › peer-review

  • Standardization
  • Materials handling
  • Welding
  • Pipe fittings
  • Hydraulic actuators

• Study of Mechanical Properties of Dual Phase EN19 Steel (AISI4140)

  Gurumurthy, Sharma, S. S., Gowrishankar, Sowmith, Abhishek & Devar, A., 01-10-2016, In: Indian Journal of Science and Technology. 9, 37, 97422.

  Research output: Contribution to journal › Article › peer-review

  • Dual phase steel
  • Heat treatment
  • Hardness
  • Mechanical properties
  • Wear resistance
  2 Citations (Scopus)

• Study of wear behavior and mechanical mixed layer on artificial aged Al6061 composite reinforced with B₄C particles

  Shankar, G., Sharma, S. S., Kini, A., Jayashree, P. K. & Gurumurthy, B. M., 01-03-2016, In: Indian Journal of Science and Technology. 9, 12, 88073.

  Research output: Contribution to journal › Article › peer-review

  • composite materials
  • hardness
  • precipitates
  • iron
  • boron carbides
  3 Citations (Scopus)

• Study on chip-morphology in turning of Ti-6Al-4V alloy under high pressure neat oil and soluble oil

  Gowri Shankar, A., Shiva Prakash, B., Jayashree, C. & Sharma, S. S., 01-01-2013, In: International Journal of Earth Sciences and Engineering. 6, 4, p. 832-837 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Machining
  • cooling
  • Cooling
  • Oils
  • oil
  1 Citation (Scopus)

• Study on dual-phase structure of AISI4140 steel

  Gurumurthy, B. M., Sharma, S. S., Shankar, M. C. G., Walia, R. & Agarwal, T., 01-09-2016, In: Indian Journal of Science and Technology. 9, 33, 93526.

  Research output: Contribution to journal › Article › peer-review

  • steels
  • normalizing
  • pretreatment
  • impact resistance
  • bainite
  2 Citations (Scopus)

• Study on Mechanical Characteristics of Nanoclay Reinforced Polymer Composites

  Shettar, M., Achutha Kini, U., Sharma, S. S. & Hiremath, P., 01-01-2017, In: Materials Today: Proceedings. 4, 10, p. 11158-11162 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Polymers
  • Polyesters
  • Tensile strength
  • Hardness
  • Resins
  14 Citations (Scopus)

• Surface Improvement of Shafts by Turn-Assisted Deep Cold Rolling Process

  Prabhu, R., Sharma, S. S., Jagannath, K., Kumar, K. & Kulkarni, S. M., 03-10-2016, In: MATEC Web of Conferences. 77, 10006.

  Research output: Contribution to journal › Conference article › peer-review

  • Cold rolling
  • Steel
  • Residual stresses
  • Compressive stress
  • X ray diffraction
  2 Citations (Scopus)

• Surface Properties and Corrosion Behavior of Turn-Assisted Deep-Cold-Rolled AISI 4140 Steel

  Prabhu, P. R., Prabhu, D., Sharma, S. & Kulkarni, S. M., 01-09-2020, In: Journal of Materials Engineering and Performance.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Steel
  • Surface properties
  • Corrosion
  • Corrosion rate
  • Residual stresses

• Tensile fractography of artificially aged al6061-sic+b4c hybrid composites

  Sharma, S., Gowrishankar, M. C., Hiremath, P., Shettar, M. & Gurumurthy, B. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 995 MSF).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • silicon carbide
  • hybrid composites
  • fractography
  • Fractography
  • Silicon carbide

• Turn-assisted deep cold rolling: An innovative manufacturing method for the improvement of fatigue life

  Prabhu, P. R., Sharma, S. S., Kulkarni, S. M. & Gowrishankar, M. C., 01-01-2015, In: International Journal of Applied Engineering Research. 10, 78, p. 64-68 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Cold rolling
  • Fatigue of materials
  • Shot peening
  • Steel
  • Burnishing
  2 Citations (Scopus)