Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Sathya Shankara Sharma
2020

Effect of heat treatment and inhibitor on corrosion behavior of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, U. A., 01-01-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 87-100 14 p., IJMPERDAPR20208.

Research output: Contribution to journalArticle

Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels- A numerical analysis

Hiremath, P., Sharma, S., Gowrishankar, M. C., Shettar, M. & Gurumurthy, B. M., 2020, In : Journal of Materials Research and Technology. 9, 4, p. 8439-8450 12 p.

Research output: Contribution to journalArticle

Open Access

Experimental validity on the casting characteristics of stir cast aluminium composites

Gowrishankar, M. C., Hiremath, P., Shettar, M., Sharma, S. & Satish Rao, U., 01-01-2020, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)
Open Access
1 Citation (Scopus)

Influence of homogenization and aging on tensile strength and fracture behavior of TIG welded Al6061-SiC composites

Jayashree, P. K., Gowrishankar, M. C., Sharma, S., Shetty, R., Shettar, M. & Hiremath, P., 01-01-2020, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Open Access

Mechanical characterization of dual phase and austempered aisi 1040 normalized steel

Gurumurthy, B. M., Shivaprakash, Y. M., Sharma, S., Achutha Kini, U. & Mathur, R., 01-01-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 247-258 12 p., IJMPERDAPR202022.

Research output: Contribution to journalArticle

Mechanical property association of dual phase and austempered aisi 4140 normalized steel

Sharma, S., Gurumurthy, B. M., Achutha Kini, U., Gowrishankar, M. C. & Shivaprakash, Y. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 174-179 6 p. (Materials Science Forum; vol. 995 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels

Gurumurthy, B. M., Gowrishankar, M. C., Sharma, S., Kini, A., Shettar, M. & Hiremath, P., 01-01-2020, (Accepted/In press) In : Journal of Materials Research and Technology.

Research output: Contribution to journalArticle

Open Access

Post solutionising rolling sway on the precipitation behaviour of eutectoid steel powder reinforced al7075 ternary alloy composites

Rajesh, Sharma, S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 9-14 6 p. (Materials Science Forum; vol. 995 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sliding Wear Behaviour of Nickel-Coated Short Fibre-Reinforced Al7075 Composites

Kumar, N., Kiran, M. D., Sharma, S. S., Ravikiran Kamath, B. & Veeresha, R. K., 01-10-2020, In : Journal of Failure Analysis and Prevention.

Research output: Contribution to journalArticle

Study of cycle time reduction and assembly process improvement for various electric stackers

Hiremath, P., Kumara, K., Sharma, S., Joseph, C. & Gowrishankar, M. C., 04-2020, In : International Journal of Mechanical and Production Engineering Research and Development. 10, 2, p. 779-792 14 p., IJMPERDAPR202078.

Research output: Contribution to journalArticle

Open Access

Tensile fractography of artificially aged al6061-sic+b4c hybrid composites

Sharma, S., Gowrishankar, M. C., Hiremath, P., Shettar, M. & Gurumurthy, B. M., 2020, Frontiers of Composite Materials IV. Martin, D. & Perova, T. (eds.). Trans Tech Publications Ltd, p. 3-8 6 p. (Materials Science Forum; vol. 995 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2019
5 Citations (Scopus)
Open Access
2 Citations (Scopus)

An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters

Bhat, R., Mohan, N., Sharma, S., Shandilya, M. & Jayachandran, K., 01-01-2019, In : Materials Today: Proceedings. 19, p. 307-311 5 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)
1 Citation (Scopus)
7 Citations (Scopus)

Epoxy-clay nanocomposite coatings: A review on synthesis and characterization

Muralishwara, K., Kini, U. A. & Sharma, S., 12-06-2019, In : Materials Research Express. 6, 8, 082007.

Research output: Contribution to journalReview article

4 Citations (Scopus)
4 Citations (Scopus)
Open Access
1 Citation (Scopus)

Interactive study on phase morphology and mechanical characteristics of diffusion annealed and age hardened Al7075-steel powder reinforced metal matrix composites

Bhat, R., Sharma, S., Gowrishankar, M. C., Shettar, M., Kartik, B. M. & Kenny, V., 01-01-2019, In : Materials Research Express. 6, 1, 016508.

Research output: Contribution to journalArticle

1 Citation (Scopus)
1 Citation (Scopus)

Investigation on effect of cold soaking on the properties of nanoclay-GFRP composite

Kini, U. A., Shettar, M., Sharma, S., Hiremath, P. & Gowrishankar, M. C., 01-01-2019, In : Materials Research Express. 6, 1, 015206.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Mechanical characterization and microstructural analysis of AISI 4340 ferrite-martensite dual phase steel

Gurumurthy, B. M., Sharma, S., Ramakrishna Vikas, S. & Achutha Kini, U., 01-01-2019, In : International Journal of Mechanical Engineering and Robotics Research. 8, 4, p. 553-558 6 p.

Research output: Contribution to journalArticle

Mechanical characterization and optimization of heat treatment parameters of manganese alloyed austempered ductile iron

Hegde, A., Sharma, S. & Sadanand, R. V., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4356-4367 12 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Mechanical characterization of heat treated Al2219 hybrid composites

Gowrishankar, M. C., Sharma, S., Pavan, B. K., Kiran, K., Rajendra, K., Hiremath, P. & Shettar, M., 01-03-2019, In : Journal of Mechanical Engineering and Sciences. 13, 1, p. 4380-4389 10 p.

Research output: Contribution to journalArticle

Mechanical properties-morphology corroboration of spheroidized AISI1040 steel

Harisha, S. R., Sharma, S., Kini, U. A., Sharma, A. & Joshi, N., 14-06-2019, In : Materials Research Express. 6, 8, 0865G8.

Research output: Contribution to journalArticle

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Bhat, R., Mohan, N., Sharma, S., Pratap, A., Keni, A. P. & Sodani, D., 01-07-2019, In : Journal of Materials Research and Technology. 8, 4, p. 3653-3661 9 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill

Bhat, R., Mohan, N., Sharma, S., Pai, D. & Kulkarni, S., 2019, In : Materials Today: Proceedings. 28, p. 2039-2046 8 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Multi-response optimization of the thrust force, torque and surface roughness in drilling of glass fiber reinforced polyester composite using GRA-RSM

Bhat, R., Mohan, N., Sharma, S., Agarwal, R. A., Rathi, A. & Subudhi, K. A., 01-01-2019, In : Materials Today: Proceedings. 19, p. 333-338 6 p.

Research output: Contribution to journalConference article

4 Citations (Scopus)

Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach

Bhat, R., Mohan, N., Sharma, S., Kini, A. U., Shivakumar, S. & Naik, N., 2019, In : Materials Today: Proceedings. 28, p. 2077-2083 7 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)
1 Citation (Scopus)

Predictive analysis of peel up delamination in glass fibre reinforced polyester composite drilling

Bhat, R., Mohan, N., Kulkarni, S. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, Special Issue 2, p. 694-702 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Prior solutionising deformation consequence on the aging characteristics of steel powder reinforced al 7075 composites

Rajesh, Sharma, S. S., Gowrishankar, M. C., Shettar, M., Hiremath, P. & Hegde, A., 09-2019, In : International Journal of Recent Technology and Engineering. 8, 2 Special Issue 11, p. 2256-2261 6 p.

Research output: Contribution to journalArticle

Sliding wear resistance and microhardness of epoxy clay nanocomposite coatings

Muralishwara, K., Achutha Kini, U., Sharma, S. & Hindi, J., 01-10-2019, In : International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 919-930 12 p., IJMPERDOCT201981.

Research output: Contribution to journalArticle

Study on tensile strength on artificially aged Al-Mg-Si alloy using Taguchi’s technique

Gowri Shankar, M. C., Shivaprakash, Y. M., Jayashree, P. K., Gurumurthy, B. M. & Sharma, S., 01-01-2019, In : International Journal of Mechanical Engineering and Technology. 10, 1, p. 1312-1320 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
6 Citations (Scopus)
Open Access
1 Citation (Scopus)
2018

Analytical study on the effect of copper and nickel in austempered ductile iron using analysis of variance

Hindi, J., Gurumurthy, B. M., Sharma, S., Gowrishankar, M. C., Jain, N. & Muralidhar, M., 01-08-2018, In : International Journal of Mechanical Engineering and Technology. 9, 8, p. 286-295 10 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2 Citations (Scopus)

Effect of heat treatment and mechanical characterization of AISI 4140 steel

Bhagyalaxmi, Sharma, S. & Kini, V., 29-11-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 6, p. 603-610 8 p., IJMPERDDEC201863.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Effect of precipitation hardening on stir cast AL6061-B4C reinforced composite

Gowri Shankar, M. C., Jayashree, P. K., Sharma, S. & Kini, A., 01-01-2018, In : International Journal of Mechanical and Production Engineering Research and Development. 8, 5, p. 459-466 8 p., IJMPERDOCT201851.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Enhancement in Hardness and Influence of Artificial Aging on Stir Cast Al6061-B4C and Al6061-SiC Composites

Gowri Shankar, M. C., Shettar, M., Sharma, S. S., Kini, A. & Jayashree, 01-01-2018, In : Materials Today: Proceedings. 5, 1, p. 2435-2443 9 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Ferrite-Bainite Dual Phase Structure and Mechanical Characterization of AISI 4340 Steel

Gurumurthy, B. M., Sharma, S. S. & Kini, A., 01-01-2018, In : Materials Today: Proceedings. 5, 11, p. 24907-24914 8 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)