Find Research Outputs

Search results

• 2020

  A study to compare the stress patterns in the edentulous mandibular bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 130-133 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures

• A study to compare the stress patterns in the edenulous mandibalur bone around the two implant retained over denture and the prosthesis restored with all-on-four concept using the three dimensional finite element analysis

  Hegde, P., Shenoy, S., Rodrigues, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-01-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 1, p. 149-153 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Implant-Supported Dental Prosthesis
  • Overlay Denture
  • Dental prostheses
  • Finite Element Analysis
  • Dentures

• Comparison of stress patterns in edentulous mandibular bone around two implant retained, four implant retained overdenture and all-on-four concept.-A 3 dimensional finite element analysis

  Hegde, P., Rodrigues, S., Shenoy, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-07-2020, In: Indian Journal of Forensic Medicine and Toxicology. 14, 3, p. 589-595 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Bone
  • Finite element method
  • Bone and Bones

• Corrigendum to “Static structural analysis of different stem designs used in total hip arthroplasty using finite element method” (Heliyon (2019) 5(6), (S2405844019310035), (10.1016/j.heliyon.2019.e01767))

  Chethan, K. N., Zuber, M., Bhat, N. S., Shenoy, B. S. & R. Kini, C., 01-2020, In: Heliyon. 6, 1, e03080.

  Research output: Contribution to journal › Comment/debate › peer-review

  Open Access

  • Arthroplasty
  • Hip

• Experimental investigation on dynamic and static transverse behaviour of thin woven Carbon/Aramid hybrid laminates

  Andrews Zachariah, S., Satish Shenoy, B., Jayan, J. & Pai, K. D., 2020, (Accepted/In press) In: Journal of King Saud University - Engineering Sciences.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Carbon
  • Laminates
  • Impact strength
  • carbon fiber reinforced plastic
  • Carbon Fiber

• Influence of fabric orientation and compression factor on the mechanical properties of 3D E-glass reinforced epoxy composites

  Nayak, S. Y., Satish, S. B., Sultan, M. T. H., Kini, C. R., Rajath Shenoy, K., Samant, R., Sarvade, P. P., Basri, A. A. & Mustapha, F., 2020, In: Journal of Materials Research and Technology. 9, 4, p. 8517-8527 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Compaction
  • Glass
  • Mechanical properties
  • Composite materials
  • Yarn
  1 Citation (Scopus)

• Investigation of coronavirus deposition in realistic human nasal cavity and impact of social distancing to contain COVID-19: A computational fluid dynamic approach

  Zuber, M., Corda, J. V., Ahmadi, M., Satish Shenoy, B., Badruddin, I. A., Anqi, A. E., Ahmad, K. A., Abdul Khader, S. M., Lewis, L., Khan, M. A. & Kamangar, S., 15-12-2020, In: CMES - Computer Modeling in Engineering and Sciences. 125, 3, p. 1185-1199 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Computational Fluid Dynamics
  • Cavity
  • Human
  • Computational fluid dynamics
  • Viruses

• Numerical investigation of flexibility: Open-cell versus closed-cell stent designs

  Bekal, C., Shenoy B., S. & Shetty, R., 04-2020, In: International Review of Mechanical Engineering. 14, 4, p. 224-229 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Stents
  • Geometry
  • Biomedical equipment
  • Bending moments

• Numerical investigation on arterial stress and displacement pattern in the vicinity of stent crown in a coronary stent

  Bekal, C., Satish Shenoy, B. & Shetty, R., 08-2020, In: Malaysian Journal of Medicine and Health Sciences. 16, p. 18-22 5 p.

  Research output: Contribution to journal › Article › peer-review

  • Crowns
  • Stents
  • Equipment and Supplies
  • Myocardium
  • Coronary Vessels

• Optimized trapezoidal-shaped hip implant for total hip arthroplasty using finite element analysis

  Chethan, K. N., Mohammad, Z., Shyamasunder Bhat, N. & Satish Shenoy, B., 01-01-2020, In: Cogent Engineering. 7, 1, 1719575.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Arthroplasty
  • Finite element method
  • Mechanical engineering
  • Orthotics
  • Orthopedics
  1 Citation (Scopus)

• Potential of Natural Fibers in Composites for Ballistic Applications–A Review

  Nayak, S. Y., Sultan, M. T. H., Shenoy, S. B., Kini, C. R., Samant, R., Shah, A. U. M. & Amuthakkannan, P., 2020, In: Journal of Natural Fibers. p. 1-11 11 p.

  Research output: Contribution to journal › Review article › peer-review

  • Natural fibers
  • Ballistics
  • Composite materials
  • Armor
  • Synthetic fibers
  6 Citations (Scopus)

• Review on unconventional wind energy

  Gulabani, G., Karim, B. S. A., Radhakrishnan, J., Satish Shenoy, B. & Zuber, M., 2020, In: Journal of Engineering and Technological Sciences. 52, 4, p. 565-583 19 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Wind turbines
  • Wind power
  • Fossil fuels
  • Environmental regulations
  • Offshore wind turbines

• Three-dimensional finite element analysis of initial displacement and stress on the craniofacial structures of unilateral cleft lip and palate model during protraction therapy with variable forces and directions

  Parveen, S., Husain, A., Gosla Reddy, S., Mascarenhas, R. & Shenoy, S., 2020, (Accepted/In press) In: Computer Methods in Biomechanics and Biomedical Engineering.

  Research output: Contribution to journal › Article › peer-review

  • Arches
  • Direction compound
  • Finite element method

• Wear estimation of trapezoidal and circular shaped hip implants along with varying taper trunnion radiuses using finite element method

  K N, C., Ogulcan, G., Bhat N, S., Zuber, M. & Shenoy B, S., 11-2020, In: Computer Methods and Programs in Biomedicine. 196, 105597.

  Research output: Contribution to journal › Article › peer-review

  • Hip
  • Wear of materials
  • Joints
  • Finite element method
  • Thigh
• 2019

  A Comparative Evaluation of Stress Distribution with Two Attachment Systems of Varying Heights in a Mandibular Implant-Supported Overdenture: A Three-Dimensional Finite Element Analysis

  Khurana, N., Rodrigues, S., Shenoy, S., Saldanha, S., Pai, U., Shetty, T., Srikant, N., Mahesh, M. & Hegde, P., 01-01-2019, In: Journal of Prosthodontics.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Cortical Bone
  • Cancellous Bone
  • Mandible
  3 Citations (Scopus)

• A study on the increasing risks(Trauma) related to an ambulance for a paramedic and patient-A review

  Gupta, R., Satish Shenoy, B., Chethan, K. N. & Zuber, M., 01-10-2019, In: International Journal of Mechanical and Production Engineering Research and Development. 9, 5, p. 791-802 12 p., IJMPERDOCT201970.

  Research output: Contribution to journal › Article › peer-review

  • Ambulances
  • Emergency vehicles
  • Ergonomics
  • Sensors
  • Accelerometers
  1 Citation (Scopus)

• Combustion chamber design for efficient heat transfer

  Kasturia, K., Saha, A., Singhal, A., Satish Shenoy, B. & Kini, C. R., 01-01-2019, In: ARPN Journal of Engineering and Applied Sciences. 14, 5, p. 1100-1103 4 p.

  Research output: Contribution to journal › Article › peer-review

  • Combustion chambers
  • Heat transfer
  • Engines
  • Gases
  • Diesel engines

• Comparative evaluation of stress distribution in bone surrounding implant using different implant biomaterials: A 3DFEA study

  Haseeb, S. A., Abdul Khader, S. M., Satish Shenoy, B., Naveen, Y. G., Giridhar Kamath, P. & Vinaya, K. C., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 523-532 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Biomaterials
  • Implant
  • Bone
  • Stress Distribution
  • Titanium

• Comparison of stress patterns in edentulous mandibular bone around two implant retained, four implant retained overdenture and all-on-four concept - A 3 dimensional finite element analysis

  Hegde, P., Rodrigues, S., Shenoy, S., Shetty, T., Pai, U., Saldhana, S. & Mahesh, M., 01-09-2019, In: Indian Journal of Forensic Medicine and Toxicology. 13, 4, p. 264-269 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Overlay Denture
  • Finite Element Analysis
  • Bone
  • simulation
  • Finite element method

• Effect of chemical treatments on hardness and toughness properties of Grewia serrulata reinforced polymer composites

  Satish Shenoy, B., Mahesha, G. T., Vijaya Kini, M. & Padmaraj, N. H., 01-01-2019, In: Journal of Mechanical Engineering Research and Developments. 42, 4, p. 228-230 3 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Acetylation
  • Toughness
  • Silanes
  • Hardness
  • Polymers
  2 Citations (Scopus)

• Effect of helix angle and cross section of helicoidal ducts in gas turbine blade cooling

  Kini, C. R., Purohit, S., Bhagat, K. K. & Shenoy B., S., 01-01-2019, In: International Review of Mechanical Engineering. 13, 2, p. 87-96 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Ducts
  • Turbomachine blades
  • Gas turbines
  • Cooling
  • Thermal load
  1 Citation (Scopus)

• Finite element analysis of different hip implant designs along with femur under static loading conditions

  Chethan, K. N., Shyamasunder Bhat, N., Zuber, M. & Satish Shenoy, B., 01-10-2019, In: Journal of Biomedical Physics and Engineering. 9, 5, p. 507-516 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Finite Element Analysis
  • Hip Joint
  • Femur
  • Hip
  • Joints
  3 Citations (Scopus)

• FINITE ELEMENT ANALYSIS of URINARY BLADDER WALL THICKNESS at DIFFERENT PRESSURE CONDITION

  Keni, L. G., Kalburgi, S., Hameed, B. M. Z., Zuber, M., Tamagawa, M. & Shenoy, B. S., 01-08-2019, In: Journal of Mechanics in Medicine and Biology. 19, 5, 1950029.

  Research output: Contribution to journal › Article › peer-review

  • Mucous Membrane
  • Pressure gradient
  • Mechanical properties
  1 Citation (Scopus)

• Periprosthetic bone response to axial loading following TKR: Effect of polyethylene thickness and implant material – a finite element analysis study

  Baliga, R., Rao, S. K., Pai, R., Shenoy, S. B., Hegde, A. K., Swaroop, S. & Shetkar, A., 16-10-2019, In: Multidiscipline Modeling in Materials and Structures.

  Research output: Contribution to journal › Article › peer-review

  • Implant
  • Bone
  • Polyethylene
  • Polyethylenes
  • Finite Element

• Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance

  Hegde, S., Satish Shenoy, B. & Chethan, K. N., 01-01-2019, In: Materials Today: Proceedings. 19, p. 658-662 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Carbon Fiber
  • Carbon fibers
  • Polymers
  • Adhesives
  • Silanes
  4 Citations (Scopus)

• Static structural analysis of different stem designs used in total hip arthroplasty using finite element method

  K.N., C., Zuber, M., Bhat N., S., Shenoy B., S. & R. Kini, C., 01-06-2019, In: Heliyon. 5, 6, e01767.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Arthroplasty
  • Structural analysis
  • Cobalt alloys
  • Chromium alloys
  • Finite element method
  7 Citations (Scopus)

• Three dimensional assessment of protraction in craniofacial structures of cleft lip and palate model using Facemask and Maxgym

  Parveen, S., Husain, A., Shenoy, S., Mascarenhas, R., Gosla Reddy, S. & Reddy, M., 01-01-2019, In: Journal of Computational Methods in Sciences and Engineering. 19, 2, p. 553-561 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Three-dimensional
  • Model
  • Computerized tomography
  • Vertex of a graph
  • Large Displacements

• Three-dimensional assessment of transverse displacement with Facemask and Maxgym in unilateral cleft lip and palate model

  Parveen, S., Husain, A., Reddy, S. G., Mascarenhas, R., Shenoy, S. & Reddy, M., 01-04-2019, In: Journal of Indian Society of Pedodontics and Preventive Dentistry. 37, 2, p. 177-184 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Palatal Expansion Technique
  • Cleft Lip
  • Cleft Palate
  • Crowns
  • Bicuspid
• 2016

  CHT analysis of trailing edge region cooling in HP stage turbine blade

  Kini, C. R., Yalamarty, S. S., Mendonca, R. M., Sharma, N. Y. & Shenoy, B. S., 2016, In: Indian Journal of Science and Technology. 9, 6

  Research output: Contribution to journal › Article › peer-review

  • turbine blades
  • trailing edges
  • cooling
  • fins
  • gas turbines
  6 Citations (Scopus)

• Effect of twisted tape inserts and stacks on internal cooling of gas turbine blades

  Kini, C. R., Kamat, H. & Shenoy, B. S., 01-01-2016, In: Indian Journal of Science and Technology. 9, 31, 95978.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • turbine blades
  • gas turbines
  • inserts
  • tapes
  • cooling
  6 Citations (Scopus)

• Numerical simulation of internal cooling effect of gas turbine blades using twisted tape inserts

  Kini, C. R., Kamat, H. & Satish Shenoy, B., 01-01-2016, In: Indian Journal of Science and Technology. 9, 31, 95795.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • turbine blades
  • gas turbines
  • inserts
  • tapes
  • cooling
  5 Citations (Scopus)

• Preparation of Unidirectional Grewia Serrulata Fiber-Reinforced Polyester Composites and Evaluation of Tensile and Flexural Properties

  Mahesha, G. T., Satish, S. B., Vijaya, K. M. & Bhat, K. S., 02-09-2016, In: Journal of Natural Fibers. 13, 5, p. 547-554 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Polyesters
  • Tensile properties
  • Bast fibers
  • Fibers
  • Polyester resins
  12 Citations (Scopus)

• Thermo-structural investigation of gas turbine blade provided with helicoidal passages

  Kini, C. R., Yagnesh Sharma, N. & Satish Shenoy, B., 01-05-2016, In: Indian Journal of Science and Technology. 9, 20, 88245.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • turbine blades
  • gas turbines
  • cooling
  • blades
  • static pressure
  7 Citations (Scopus)
• 2015

  A 3 dimensional assessment of the depth of tumor invasion in microinvasive tongue squamous cell carcinoma - A case series analysis

  Amit-Byatnal, A., Natarajan, J., Shenoy, S., Kamath, A., Hunter, K. & Rad-Hakrishnan, R., 01-11-2015, In: Medicina Oral, Patologia Oral y Cirugia Bucal. 20, 6, p. e645-e650

  Research output: Contribution to journal › Article › peer-review

  • Tongue
  • Squamous Cell Carcinoma
  • Neoplasms
  • Nonparametric Statistics
  • Recurrence
  3 Citations (Scopus)

• Experimental study of hydrodynamic pressure distribution in oil lubricated two-axial groove journal bearing

  Binu, K. G., Yathish, K., Mallya, R., Shenoy, B. S., Rao, D. S. & Pai, R., 01-01-2015, In: Materials Today: Proceedings. 2, 4-5, p. 3453-3462 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Journal bearings
  • Oils
  • Pressure distribution
  • Hydrodynamics
  • Pressure measurement
  9 Citations (Scopus)

• Steady state characteristics of misaligned multiple axial groove water-lubricated journal bearing

  Mallya, R., Shenoy, S. B. & Pai, R., 03-06-2015, In: Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 229, 6, p. 712-722 11 p.

  Research output: Contribution to journal › Article › peer-review

  • journal bearings
  • Journal bearings
  • grooves
  • misalignment
  • Friction
  26 Citations (Scopus)
• 2013

  Development of short areca fiber reinforced biodegradable composite material

  Padmaraj, N. H., Kini, M. V., Pai, B. R. & Shenoy, B. S., 01-01-2013, In: Procedia Engineering. 64, p. 966-972 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Fibers
  • Composite materials
  • Plasticizers
  • Starch
  • Water
  19 Citations (Scopus)
• 2012

  Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing

  Shenoy, B. S., Binu, K. G., Pai, R., Rao, D. S. & Pai, R., 01-01-2012, In: Tribology International. 45, 1, p. 38-42 5 p.

  Research output: Contribution to journal › Article › peer-review

  • fluid films
  • application programming interface
  • Nanoparticles
  • Application programming interfaces (API)
  • oils
  47 Citations (Scopus)

• Effect of turbulence and offset loading on the performance of a single pad externally adjustable fluid film bearing

  Satish, S. B., Rammohan, P. B. S., Raghuvir, P. B. & Shrikanth, R. D., 2012, ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012. PARTS A, B, AND C ed. Vol. 3. p. 977-983 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Reynolds equation
  • Finite difference method
  • Turbulence models
  • Aspect ratio
  • Turbulence

• Stability characteristics of a tri-taper journal bearing: A linearized perturbation approach

  Pai, R., Rao, D. S., Shenoy, B. S. & Pai, R. S., 2012, In: Journal of Materials Research and Technology. 1, 2, p. 84-90 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Journal bearings
  • Reynolds equation
  • Finite difference method
  • Linearization
  • Boundary conditions
  1 Citation (Scopus)
• 2011

  A computational conjugate thermal analysis of HP stage turbine blade cooling with innovative cooling passage geometries

  Kini, C. R., Satish, S. B. & Sharma, N. Y., 14-11-2011, Proceedings of the World Congress on Engineering 2011, WCE 2011. p. 2168-2173 6 p. (Proceedings of the World Congress on Engineering 2011, WCE 2011; vol. 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Turbine Blade
  • Thermal Analysis
  • Cooling
  • Thermoanalysis
  • Turbomachine blades
  14 Citations (Scopus)

• Dynamic characteristics of a single pad externally adjustable fluid film bearing

  Shenoy, S. & Pai, R., 03-05-2011, In: Industrial Lubrication and Tribology. 63, 3, p. 146-151 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Fluids
  • Film thickness
  • Damping
  • Bearing pads
  • Stiffness
  7 Citations (Scopus)

• Effect of increased severity in patient specific stenosis of common carotid artery using CFD-a case study

  Khader, S. M. A., Shenoy, B. S., Pai, R., Kamath, S. G., Sharif, N. M. & Rao, V. R. K., 2011, In: World Journal of Modelling and Simulation. 7, 2, p. 113-122 10 p.

  Research output: Contribution to journal › Article › peer-review

  • Stenosis
  • Arteries
  • Computational Fluid Dynamics
  • Shear stress
  • Computational fluid dynamics
  13 Citations (Scopus)

• Effect of turbulence on the static performance of a misaligned externally adjustable fluid film bearing lubricated with couple stress fluids

  Shenoy, B. S. & Pai, R., 11-2011, In: Tribology International. 44, 12, p. 1774-1781 8 p.

  Research output: Contribution to journal › Article › peer-review

  • fluid films
  • Turbulence
  • turbulence
  • lubricants
  • Lubricants
  15 Citations (Scopus)